TET
TOKYO ELETECH CORPORATION
TOKYO ELETECH CORPORATIONTOKYO ELETECH CORPORATION
TOKYO ELETECH CORPORATION
1. Product description
The SICA14I2P is desi ned to save space on the tar et board when usin JTAG
equipment to test, debu or evaluate a system. The tar et board connector has a 5 x 7mm
footprint, which is 1/6th the size compared with traditional connector with 2.54mm pitch.
This cable adapter converts 2.54mm pitch connector at an emulator side into 0.5mm pitch
at a tar et board. Therefore, this cable can be placed closed to CPU. The tar et board
connector surface mounted on PCB without needin any “throu h holes”. Now, the other
side of PCB is available for mountin more components.
2. Specifications
2.1 Operatin and Stora e environments:
Title Operatin environment Stora e environment
1. Temperature 10 to 35℃ -10 to 50℃
2. Relative humidity
35 to 80% (No condensation on any devices)
3. Chemical as No corrosive as should exist in the environment.
2.2 Mechanical and Electrical specifications:
Title Specifications
１ Outer dimensions 34 x 52 x 17mm
２ Connector at an emulator side HIF3FC-14PA-2.54DSA(71)
３ Header at tar et side Custom made connector, 20pins, 0.5 mm pitch
４ Socket at tar et side Custom made connector, 20pins, 0.5mm pitch
５ Cable material FPC, polyamides, double layers
６ DC resistance 300ｍΩ Max
７ Life of connectors 500 times Min
８ Current ratin 0.5A/line Max
Instruction for use
Small Interface Cable Adapter, SICA14I2P
