TESTO 876 Guía de referencia
Brief instructions en
testo 876 · Thermal imager
Commissioning
1
Unlock and open the battery compartment
.
2
Insert Memory card in the card slot
.
3
Slide the
rechargeable battery
into the
battery slot, until it clicks into place
.
- The thermal imager starts automatically.
4
Close and lock the
battery compartment
.
5
Unfold the
display
.
- Instrument language (Language) and
temperature unit (Unit) can be set:
6
Move Joystick
up / down to select the
desired option. Press [OK]
.
7
Move Joystick up / down to change the
setting. Press [OK].
8
Press [Apply]
function key to apply the
settings.
9
Press []
to switch off the thermal
imager.
10
Unlock and open the interface terminal
.
11
Connect mains unit (power supply)
.
12
Completely charge battery (3 hours).
- The camera is now ready for operation.
Recording the image
1Freeze image: Press trigger button once.
2Save image: Press trigger button again.
or
Discard image: Press [Esc] .
Switching on / off
Remove protection cap from the lens.
Switch on: Press [ ] .
- The measurement view is opened after the
warm-up period.
- The thermal imager performs an automatic
zeroing approx. every 60 sec. This can be
recognized by a “click”. The image is frozen
briefly when this occurs.
Switch off: Press [ ] again.
Focusing the picture
With motor focus
1Switch on motor focus: Slide motor focus
switch towards the display (position ).
2Focus: Move motor focus control to the
left / right.
Manual
Caution! Manually turning while motor focus is
switched on damages the auto mechanism.
Switch off motor focus: Slide motor focus
switch towards the lens (position: ).
Turn lens by hand.
Changing assignment of the quick
select buttons
Change the left or right quick select button:
1Call up: Move Joystick to the left or
right.
2Navigate: Move Joystick up / down.
3Confirm: Press [OK] .
or
Cancel: Press [Esc] .
Getting to know the quick select
buttons
Using the quick select buttons, the set
functions are called up directly. Factory
settings:
Left quick select button : Adjust scaling.
Right quick select button : Select image
type.
Getting to know the menu
1Open menu: Press [OK] .
2Navigate: Move Joystick up / down.
3Open submenu (only for menu points
marked with ): Move joystick to the right.
4Call up a function: Press [OK].
or
Exit menu: Press [Esc] .
Measurement
Image gallery
Scale...
Display...
Emissivity...
Palette
Audio…
Configuration
Scale… Image type
Image type
Palette
Emissivity...
Scale...
Adjustment
0970 8761 en 01 V01.06 en
Otros manuales para 876
3
Tabla de contenidos
Otros manuales de Cámara térmica de TESTO
TESTO
TESTO 865 Manual
TESTO
TESTO 875-2i pro Manual de usuario
TESTO
TESTO 881 Manual de usuario
TESTO
TESTO 875 Manual de usuario
TESTO
TESTO 875 Manual de usuario
TESTO
TESTO 875i Guía de referencia
TESTO
TESTO 882 Manual de usuario
TESTO
TESTO 875 Guía de referencia
TESTO
TESTO 885 Manual de usuario
TESTO
TESTO 870 Manual de usuario
TESTO
TESTO 870 Guía de referencia
TESTO
TESTO 885 Guía de referencia
TESTO
TESTO 885 Manual de usuario
TESTO
TESTO 883 Manual de usuario
TESTO
TESTO 885 Manual de usuario
TESTO
TESTO 882 Manual de usuario
TESTO
TESTO 871 Manual de usuario
TESTO
TESTO 885 Manual de usuario
TESTO
TESTO 890 Manual de usuario
TESTO
TESTO 876 Guía de referencia
