Test Equipment Depot Rapport 337 Manual de usuario

99 Washington Street

Melrose, MA 02176

Fax 781-665-0780

TestEquipmentDepot.com

Before Using Rapport 337 1

1. Safety Information 2

•WARNING 2

•Battery Charging & Its Precautions 4

2. Introduction of Rapport337 6

•FEATURES 6

•Main Functions of RAPPORT337 6

•Standard Items 7

•Names & Functions of Each Part 8

3. Specifications of Rapport337 13

•General Specifications 13

•Meter Specifications 14

4. Functional Use 16

•Power ON/OFF 16

•OSD Setup Screen when Power is on 16

•Mode Setup 17

•VIDEO TESTER 18

•DIGITAL MULTI METER 21

•PTZ CONTROLLER 28

•UTP CABLE TESTER 33

•VIEW INFORMATION 34

•MAIN SETTING 34

W A R N I N G

◉The following is important to use Rapport337 safely.

First of all, read through "the precautions for your safety" before

using the system.

Make sure to check the input and output range of voltage or current

at every input and output ports of Rapport337 before connecting

each of them, so that the system cannot be overloaded when in

use.

Set up the range for measuring voltage, current and resistance for

their known values and use the maximum range for unknown values

to protect the unit from damage.

The following operational environment should be maintained

constantly for the proper use of Rapport337.

•Temperature : -10℃~ 50℃

•Relative humidity : 30% ~ 90%

•Recharging voltage : 12V ±10%, above 1A

W A R N I N G

Make sure to read through "Safety Information" before using

Rapport337.

This basic instruction manual is for users of Rapport337. Starting

with the outline of Rapport337, the manual is emphasized on the

explanations of its operation, how to be connected to the other

devices, how to use every button, and how to set up the system.

It is highly recommended, for those who have handled similar

devices as well as for those who are using it for the first time, to

read every description line by line, especially cautions, before using

the Rapport 337.

And when there is any question when in use or there is any

damage, make sure to contact the dealer of your Rapport337.

In the 1st Chapter "Safety Information", warnings and

precautions are explained for the safety of users when Rapport337

is in use.

In the 2nd Chapter "Introduction of Rapport337", its features

and appearance are explained.

In the 3rd Chapter "Specifications of Rapport337", the

specification of the rapport337 components are explained.

In the 4th Chapter "Functional Use", the functions of Rapport337

are explained so that the users can use it conveniently.

W A R N I N G

◉Battery Charging & Its Precautions

With the rechargeable 6 nickel hydrogen

(Ni-MH) AA-size batteries placed in,

Rapport337 can be charged with an

adopter of above DC 12V, 1A, and it

takes more than 8 hrs for the battery to

be fully charged.

The battery operates normally after initial

2 or 3 times of full charging, and it can be

used for about 4 hrs and above.

The battery charging can be checked on

the initial picture of POWER ON, and

also confirmed on the VIEW INFORMATION.

The battery is recharged when connected

to a DC adopter irrespective of the Power

slide S/W or button.

Alkaline battery(AA size) is usable for

about 2 hrs.

W A R N I N G

◉

Pay attention to the following precautions when using

Rapport337.

•

Do not use the unit in damp humidity or leaking gas environments.

•Do not touch it with wet hands.

•Be mindful not to shock or shake the unit while in use to avoid

damage.

•Avoid the places of strong magnetism or electric wave, which

would cause incorrect measuring.

•Be careful not to expose the ports or joints to dirt or liquid.

•Make sure to use specified replacement fuses described in the

3rd chapter.

•Do not disassemble the Rapport 337.

•Do not use the meter function, when the Rapport337 or the lead

set look damaged.

•Do not measure resistance when the power is applied to a circuit.

•When using the meter function, do not forget to turn on the power

of Rapport337 and set up the proper measurement mode before

connecting to a circuit to be measured.

•Turn off the power to the circuit to be measured and discharge all

high voltage capacitance before starting resistance or continuity

tests to avoid damage to the Rapport 337.

•Put the finger behind the protecting pad when using a probe.

◉FEATURES

As a handy and portable device designed for testing various appliances, for

the image-output equipments to be installed, Rapport337 is an efficient

tester with useful testing functions, to assist the installation of CCTV, UTP

test, communications test, RS-485 communications inspection, etc.

For testing each function, set up modes and capacities to be tested, using

the key pad located on the front part of Rapport337.

◉Main Functions of RAPPORT337

•Video tester ▶The video signal and the quality of picture

can be tested, and brightness, color and

focus can also be adjusted while the image

is being watched.

▶Video signal generator mode : lt outputs color

bar Red,Blue and Green screen to allow

technician to inspect video monitor or DVR.

Support both PAL & NTSC video signal format.

•Multimeter ▶Voltage, current, resistance, short-test can

be tested.

•PTZ Controller ▶The basic operational test of PTZ, and other

tests of focus and image checkup, etc. that

are needed for the installation of PTZ are

possible.

It supports RS-485/422 communications

mode.

•

PTZ Protocol Analyzer

▶It determins which protocol to control your PTZ

Camera from PTZ Controller or DVR.

This will guide CCTV installer to understand the

Protocol and find the fault device easily.

•UPT Cable tester ▶The wiring condition(disconnected, shorted)

of UTP cable can be checked out.

- Cautions for Battery -

•The following batteries can be used for Rapport337

- (AA)-size alkaline battery (6EA)

- (AA)-size chargeable nickel hydrogen (Ni-MH) battery (6EA)

•Use only chargeable nickel hydrogen (Ni-MH) batteries, when charging

batteries,using an adapter to Rapport337.

•Place the CHARGE SWITCH "ON" position for recharging.

The CHARGE SWITCH is located on the upper part of battery insert.

(Refer to the figure below)

•The performance of batteries can be very different, according to

manufacturers. Please use any reliable brand.

•Do not mix batteries of different manufacturers when charging batteries.

•Make sure not to disorient the polarization of batteries.

•Do not short-circuit or disassemble batteries.

•Make sure to check the polarization and the voltage and current

ratings before charging batteries and disconnect the charger

immediately should an abnormal situation arise.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com

◉Standard Items

Check the contents of your Rapport337 package with the standard checklist

below placing them on a level place.

•Rapport337 Main Body

•User's Manual

•Test Lead Set(Red, Black)

•Adapter

•Rechargeable AA(Size) Nickel Hydrogen(Ni-MH) Battery (6EA)

•Necklace

•UTP test Terminal

•BNC Video Cable

•Car Power jack

Optional Items

•Tester Bag

◉Names & Functions of Each Part

109

Part Name Function

⑥Key Button Controlling External Devices of Rapport337

MODE Button

SET Button

OSD Button

FAR Button

NEAR Button

TELE Button

WIDE Button

Shift Setup

Button

Mode Select

(Video, Multi Meter, PTZ Control, UTP Test)

It is used when setup is changed

It toggles OSD & POWER on/off

It adjusts PTZ focus (far direction) &

Video Mode Brightness

It adjusts PTZ focus (near direction) &

Video Mode Brightness

It zooms PTZ(zoom in) &

adjusts Video Mode Contrast

It zooms PTZ(zoom out) &

adjusts Video Mode Contrast

It shifts up, down, right, left for PTZ &

for menus & others

Power LED

Charge

Indicating LED

Data Transmitting

LED

Data Receiving

LED

LCD

Red LED is on when the system is switched on

Green LED is on when being charged

Red LED is on when data is transmitted

Red LED is on when data is received

TFT LCD

①

②

③

④

⑤

Part Name Function

⑦Key Button METER PART

⑧Test Lead Connection Test Lead Positioning for Lead Connection

Resistance

Button

Voltage Button

Setup Change

Button

Current

Measuring

Button 1

Current

Measuring

Button 2

Current

Measuring

Button 3

HOLD, HELP

Button

It measures resistance

It measures voltage

It changes setup of AC/DC,

resistance/continuity test

It is used for measuring lower current below 4 mA

It is used for measuring current below 400 mA

It is used for measuring current below 10A

Measuring range can be changed and holded

HELP function

It indicates position of Red Test Lead for measuring

Voltage & Registance

It indicates position of Black Test Lead

It indicates position of Red Test Lead for measuring

Current below 400mA

It indicates position of Red Test Lead for measuring

Current below 10A

1211

Part

①

②

③

④

⑤

⑥

Name

Input BNC

Output BNC

Communication

Port

Base

Safety hook Up

Safety hook

Down

Function

It inputs external image signal

It outpus input image signal to Rapport337

or internally generated Video Test Signals

It is the port of input & output of communication

signal.(Rx+, Rx-,Tx+,Tx-)

It braces Rapport337

It hangs on the neck for safety

Part

①

②

③

④

Name

UTP Jack

AUX Jack

DC Power Jack

Power S/W

Function

Test jack for UTP cable

Audio, AUX input port

(function to be added when upgraded)

DC power input jack(for over DC12V,1A)

ON/Off main power supply

1413

◉General Specifications

Electric

Characteristic

Image

PTZ

operation test

UTP Cable

Test

Size

Input Voltage

Battery

Built-in Charger

TV Type

Image level

Protocol

Transmission

speed

Transmission

mode

Kinds of test

12V ±10%, above 1A

Chargeable Ni-MH battery 6EA (AA size)

NTSC/PAL

1 Vpp, 140 IRE

Multi-Protocol support

2400bps ~ 38400bps

RS-422,RS-485

direct/cross cable, and broken or short-circuit

can be tested

Charging Time

Operation time

Above 8 hrs

More than 4 hrs

W(88mm) X L(190mm) X T(58mm max)

◉Meter Specifications

DC Voltage

AC Voltage

DC Current

400mV

400V

40V

400V

100uV

1mV

10mV

100mV

1mV

10mV

100mV

0.2uA

2uA

20uA

200uA

2mA

±(0.8% + 2dgts)

±(1.0% + 2dgts)

±(1.2% + 3dgts)

(40Hz ~ 500Hz)

±(1.0% + 2dgts)

±(1.5% + 2dgts)

±(2.0% + 3dgts)

Measuring Measured Value Minimum Accuracy

Item Measuring

4mV

400mV

10A

400uA

4mA

40mA

400mA

10A

1615

AC Current

Resistance

Continuity

Rated fuse

400Ω

4㏀

40㏀

400㏀

4㏁

40㏁

0.2uV

2uV

20uV

200uV

2mV

0.1Ω

1Ω

10Ω

100Ω

1㏀

10㏀

±(1.5% + 5dgts)

(40Hz ~ 500Hz)

40Hz ~ 500Hz

±(1.8% + 5dgts)

(40Hz ~ 500Hz)

40Hz ~ 500Hz

±(3.0% + 4dgts)

40Hz ~ 500Hz

±(1.0% + 4dgts)

±(1.0% + 2dgts)

±(2.0% + 4dgts)

±(3.0% + 5dgts)

Measuring Measured Value Minimum Accuracy

Item Measuring

4mV

400mV

10A

400uA

4mA

40mA

400mA

10A

Beeper is activated when the resistance is below 80Ω

250 Volt 800 mA

◉Power ON/OFF

•The Power slide switch is located on the side of Rapport337.

Turn the Power slide switch on, and press to start the Rappor337.

To turn off the system, press more than 3 sec. Then, POWER OFF

is displayed on the main screen with a beep. Release the button.

The power goes off.

•A rechargeable battery should be plugged in over 8 hrs for full charge.

The charged battery can operate for 4 hrs or so.

•When the battery indicator shows below [][], recharge it for use.

(Full charge : [][][][])

◉OSD Setup Screen when Power is on

•When power is on, the setup OSD is displayed, and it enters

automatically to the video test mode after 3 ~ 5 sec.

The initial OSD displays its RAPPORT337 version and the initial setup

on the screen.

Product Version : 3.01

Firmware Version : 3.02

Initial Protocol : PELCO-D

TV mode : NTSC/PAL automatic setup

Battery indicator : [][][][]

RAPPORT :

User's name(Name can be changed in Main menu.)

•Model & software versions are subject to be changed without any further

notice.

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

FAX 781.665.0780 - TestEquipmentDepot.com

Tabla de contenidos

Otros manuales de Equipo de prueba de Test Equipment Depot

Test Equipment Depot

Test Equipment Depot FHT-801 Manual de usuario

Test Equipment Depot

Test Equipment Depot GOS-620 Manual de instrucciones

Test Equipment Depot

Test Equipment Depot Druck DPI 811 Manual de usuario

Test Equipment Depot

Test Equipment Depot Net Prowler TNP700 Manual de usuario

Test Equipment Depot

Test Equipment Depot GPL-5010 Manual de usuario

Test Equipment Depot

Test Equipment Depot Cable Prowler TCB300 Manual de usuario

Test Equipment Depot

Test Equipment Depot 990DSL Manual de usuario

Test Equipment Depot

Test Equipment Depot teletalker 330 Manual de usuario

Test Equipment Depot

Test Equipment Depot Megger MPQ1000 Manual de usuario

Test Equipment Depot

Test Equipment Depot Net Chaser TNC950AR Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario