7The construction of the simulator is not designed for use in an explosive envi-
ronment.
Each electrostatic discharge produces powerful electro-
magnetic interference.
Nearby electronic equipment can be seriously disrupted
unless the appropriate counter-measures are taken.
Perform ESD tests preferably in a shielded room.
If a network needs to be exchanged, the test has to be
stoppedrst,followedbyawaitingtimeofatleast5s
to ensure the voltage being internally discharged.
The rechargeable batteries in the base station must not be short-circuited under
any circumstances. They must only be recharged with the original charging unit
supplied with the generator. Should they have to be replaced, kindly observe
the relevant recommendations for their correct disposal.
The instrument must not be opened. Repairs, maintenance work and internal
adjustments are only to be carried out by a qualied service engineer.
Use the instrument only in dry surroundings. Any condensation that occurs
must be allowed to evaporate before putting the generator into operation. Long
periods of exposure to sunlight and excessive warming by external energy
sources are to be avoided.
Do not continue to use the instrument should any mechanical damage occur.
The instrument’s housing and the cable have both an insulating and a screen-
ing function, which can only be assured while the housing is intact. Return a
damaged generator to a Teseq service centre immediately for repair.
Teseq AG Luterbach, Switzerland and the associated sales organization accept
no responsibility for personal or material damage nor for any consequential
damage that results from irresponsible operation of this instrument.
