Teracue DEC-200 Manual de usuario

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

C-

-2

0™

™

G-

-2

User Guide V2.7

Teracue eyevis GmbH

Schlossstr. 18

85235 Odelzhausen

Germany

Tel: +49 (0)8134-555-10

Fax: +49 (0)8134-555-199

[email protected]

www.teracue.com

Document Version 2.7/120328

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

OPYRIGHT This document may not be reproduced in any form, in whole or in part, without

the prior permission of Teracue eyevis GmbH.

ISCLAIMER This publication supersedes all previous publications.

Information and specification in this documentation is subject to change

without notice. Please make sure you have the latest document version. User

guides are located at: www.teracue.com/support

If you find some points in this document unclear then please let us know, so

we can improve this documentation.

Thank you! Mail to: documentation@teracue.com

All information within this document is confidential to Teracue eyevis GmbH

costumers and should not be copied or distributed to non Teracue eyevis

GmbH customers.

RADEMARKS DEC-200™ and all of its components are registered trademarks licensed to

Teracue eyevis GmbH.

All other logos and trademarks both marked and not, may be trademarks or

registered trademarks and therefore property of their respective owners.

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

I. Information about the manual

This document is designed to help users setup, configure and work with the H.264/

MPEG-2 decoders.

If you received this publication as a PDF, then it's a good idea to print it out for future reference.

It is best to use this user guide directly in front of your computer, by doing so you try out everything at

once.

.!. Important features are marked by this sign.

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

II. Release Notes

Following are the Features listed which are supported from the firmware versions:

Version 0.1.8 –

09/26/2008

16:00

 Analogue Audio R + L Output are supported.

 Support of PAL

 CVBS Video Output is supported by using the breakout cable.

 YC Video Output is supported.

 SDI Video Output is supported by using the BNC interface on the front panel.

 Receiving and processing of MPEG-2 SD streams is possible.

 Receiving and processing of H.264 SD (MPEG-4 part 10) streams is possible.

 Simple firmware updating via web interface.

 Network settings are adjustable.

 Overview of the DEC’s system environments displayed under ‘System’ menu, i.e. decoder

CPU load, firmware version.

Version 0.1.9 – 0.1.12

– Internal Versions

Version 0.1.13 –

10/17/2008

17:36

 Supports the automatically and manual setting of the Video PID and of the Program number.

Version 0.1.14 – 0.1.16

– Internal Versions

Version 0.1.17 –

10/30/2008

06:24

 Supports changing the hostname of the DEC-200™

 Improvement of the unicast reception

Version 0.1.18 –

12/05/2008

16:48

 Support of the Factory-Reset feature via jumper

 Video streams can be also decoded and displayed, which do not contain any IDR-Frames

Version 0.1.19 – 0.1.21

– Internal Versions

Version 0.1.22 –

03/06/2009

12:47

 Support of NTSC

 Support of RGB and Component as Video output

 Support of Talkback with the ENC-100™ v3.12

Version 0.1.23 – 0.1.26

– Internal Versions

Version 0.1.27 –

07/30/2009

13:12

 Genlock

 DHCP Support

 OSD-Display at the program start for 2-3 seconds

 Video Loss Display is added. Upon video loss users can choose between ‘Blank’, ‘Hold’ and

‘Colour bar’ to display a frame in spite of a video loss.

 Real Time Clock (RTC) support

Version 0.1.28 – 1.29.7

– Internal Versions

Version 1.29.8 –

11/02/2009

09:21

 Page refresh of the DEC web pages are supported

 XPlayer-Link added. To check, whether the entered source input stream is available in the

network. If the Standalone XPlayer is installed on the client PC, running the web-config pages,

the XPlayer can directly be launched by a mouse click from the user interface.

 Aspect ratio letter-boxing added for MPEG-2 PAL and NTSC

 Talkback performs now auto-reconnect

 Improvement of multicast socket handling

 Enhanced long term stability

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

Version 1.29.9

– Internal Version

Version 1.29.10

–

11/19/2009

09:39

 CVBS / SDI Output Switching of the BNC Connector on the Front Panel

Version 1.29.11 – 1.29.13

– Internal Versions

Version 1.29.14

–

01/28/2010

17:29

 Comport for RS-232 operation is supported and settings are adjustable via GUI.

 DF-Mode is added. This mode is for a better audio/video delay when the audio/video delay of

the source is bad.

Version 1.29.15 – 1.31

–

Internal Versions

Version 1.32 –

03/26/2010

12:53

 PTS based AV sync implemented for that case that audio comes first.

 Improved decoder/transport settings menu.

 Display aspect ratio 4:3/16:9. With MPEG2 aspect ratio is set to the value found in VES, with

H.264 no aspect ratio conversion is done.

 Video format mismatch correction (only spatial):

NTSC: PAL ‘overhead’ is cut off symmetrically

PAL: NTSC is displayed centred (letter-boxed).

 Display state messages ‘STREAM LOSS’ when ‘StreamLoss Display’ is set to ‘B/W TEXT’.

 Display state messages ’NETWORK LOSS’ when the decoder loses the network connection.

 Play sine wave when ‘StreamLoss Display’ is set to ‘COLORBAR’.

 GPIO function is added; GPIO Modes: Manual, Passthrough/A, Passthrough/B.

 Added support for Status LED.

 Movies with an unknown resolution will be centred now.

 New Comport Mode ‘Packet’ is added for a tunnelled data transmission with the compliance of

the temporal sequence.

 New setting options in the decoder/audio settings menu: ‘Talkback Port’ and ‘Output Mute’.

 Audio gain values are now set in dB values instead of percent values.

 Change video output (CVBS, RGB ...) works now also without the reboot.

 Selectable network link mode.

 New system status parameter added: ‘Mac Address’ and ‘Link Mode’.

Version 1.33

–

Internal Version

Version 1.34 –

06/15/2010

13:48

 Embedded audio flag was corrected.

Version 1.35 – 1.37

–

Internal Versions

Version 1.38 –

08/10/2010

20:36

 Audio PID is user configurable.

 UDP receive-buffers were increased.

 Improved audio/video synchronisation.

 WSS signalling added.

 Full SNMP remote control added and MIB files. All settings can be remotely configured by 3rd

party SNMP manager.

 SNMP status traps added

Version 1.39 – 1.41

–

Internal Versions

Version 1.42 –

03/18/2011

14:41

 Support for TCP transmissions in connection with the ENC-200™

 support for traceroute

 Implemented a more intelligent adaptive DF mode which includes now also an low delay mode

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

Version 1.43 – 1.46

–

Internal Versions

Version 1.47 –

12/20/2011

12:27

 ‘DF mode’ is renamed in ‘Low Latency’

 No ‘Streamloss’ display when audio only streams are received

 Comport: New Packet Mode with TCP

 Comport: Passthrough-Mode optimized for transfer of short packages

 Talkback: Added support for down sampling

 Restart audio streaming in case of stream errors

 ENC-200™ codec’s (H.264 and AAC) are now default for decoding. Previous default codec’s

were MPEG2 and MPEG audio.

 Added more AAC format checks, changed AAC frame syncing to get a more robust decoding

process.

 New config option ‘Enable Config Port’ added, to enable or disable configuration port 2323.

Version 1.48 –

02/15/2012

11:14

 Bigger retry-interval to create a new connection via TCP

Version 1.49 Internal Version

Version 1.50 – 07/27/2012 13:26

 BUGFIX: No audio with french ARTE SD.

 fix broken audio channel status data (ICUE... usw) for SDI

 swap left and right for digital audio and align samples

 align samples for analog audio

Version 1.51 – 01/15/2013 10:33

 BUGFIX: Re-enable factory reset via jumper

Version 1.52 – 05/16/2013 18:23

 "Stop Interval" for TCP (re)connection

 BUGFIX: enable DHCP

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7



III. Content

1. OVERVIEW ...................................................................................................................................... 8

2. GENERAL INFORMATION ............................................................................................................. 9

2.1 UNPACKING THE DECODER ......................................................................................................... 9

2.2 SETTING UP THE DECODER AND SAFETY INSTRUCTIONS .............................................................. 9

2.3 CONNECTING THE DECODER (FR-110 CHASSIS) ........................................................................ 10

2.4 ASSIGNMENT OF THE SUB-D 26-PIN CONNECTOR ...................................................................... 11

2.5 BREAKOUT CABLE ‘S’ ............................................................................................................... 12

2.6 BREAKOUT CABLE ‘P’ ............................................................................................................... 13

3. DEC-200™ USER GUIDE ............................................................................................................. 14

3.1 ACCESSING AND CONFIGURING DECODERS ............................................................................... 14

3.2 LOGIN ..................................................................................................................................... 15

3.3 GRAPHICAL USER INTERFACE OF THE DEC-200™ .................................................................... 16

3.3.1 Navigational Menus ........................................................................................................... 16

3.3.2 ‘APPLY’ and ‘SAVE’ Buttons ............................................................................................. 17

3.4 DECODER CONFIGURATION ...................................................................................................... 18

3.4.1 Menu: Decoder / Settings .................................................................................................. 18

3.4.2 Menu: Decoder / Transport ................................................................................................ 19

3.4.3 Menu: Decoder / Video ...................................................................................................... 20

3.4.4 Menu: Decoder / Audio ...................................................................................................... 21

3.4.5 Menu: Decoder / Source .................................................................................................... 23

3.4.6 Menu: Decoder / Genlock .................................................................................................. 25

3.4.7 Menu: Decoder / GPIO ...................................................................................................... 26

3.4.8 Menu: Decoder / XPlayer .................................................................................................. 28

3.4.9 Menu: Network / Settings .................................................................................................. 29

3.4.10 Menu: Network / SNMP (Simple Network Management Protocol) ................................ 31

3.4.10.1 Setting up the SNMP Manager ‘MIB Browser’ ......................................................... 33

3.4.11 Menu: Comport / Settings .............................................................................................. 36

3.4.12 Menu: System / Settings ................................................................................................ 38

3.4.13 Menu: System / Date/Time ............................................................................................ 39

3.4.14 Menu: System / Update (Upgrading firmware version) ................................................. 40

3.4.15 Menu: System / Password ............................................................................................. 41

3.5 HELP ....................................................................................................................................... 42

3.6 LOGOUT .................................................................................................................................. 43

4. EXTENDED FUNCTION ................................................................................................................ 44

4.1 REMOTE CONTROL .................................................................................................................. 44

4.2 AUDIO TALKBACK ..................................................................................................................... 48

4.2.1 Talkback Session between DEC-200™ and ENC-200™ .................................................. 48

4.2.2 Talkback Session between DEC-200™ and ENC-100™ .................................................. 50

4.3 TCP STREAMING ..................................................................................................................... 52

4.3.1 TCP configuration when ENC-200™ is the Server ........................................................... 52

4.3.2 TCP configuration when DEC-200™ is the Server ........................................................... 53

4.4 RESETTING TO FACTORY DEFAULT ........................................................................................... 54

4.5 OUTPUT SIGNAL SWITCHING OF THE BNC CONNECTOR ON THE FRONT PANEL ........................... 56

4.6 RESTARTING THE DEC-200™ .................................................................................................. 57

5. TECHNICAL SPECIFICATION ...................................................................................................... 58

6. KNOWN ISSUES ........................................................................................................................... 60

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

1. Overview

The DEC-200™ is a compact, low cost H.264 SD and MPEG-2 SD video/audio stream receiver and

decoding appliance. Furthermore, the DEC-200™ real-time decoders are robust 24/7 LIVE stream

decoders for all types of operating conditions. The decoder supports RGB, Component (YPbPr), S-

Video, Composite and SDI (with embedded audio).

It is designed for LAN and intranet network video applications. As an output point for streaming media,

it provides easy access to professional DVB/DVD-quality streams.

Decode streams with the DEC-200™ to provide networking video and audio on standard TV’s, LCD’s,

plasmas, monitors and on projectors. The DEC-200™ provides versatile video/audio output in one

simple and low-cost solution. Video-over-IP reception and DVB/DVD-quality processing of both H.264

and MPEG-2 SD streams are supported by the compact, flexible, yet robust and highly supportable

DEC-200™ ‘blade-based’ appliance.

Use the DEC-200™ for LIVE video networking applications. Place the DEC-200™ anywhere on the

network to facilitate DVD-quality video viewing of camera signals, TV channels, monitoring feeds or

any other standard H.264 SD and MPEG-2 SD streaming video and audio source on the network.

When combined with the ENC encoder series or the DVB/IP video gateways, the DEC-200™

becomes part of a comprehensive real-time LIVE video transmission, collaboration, contribution,

trunking, monitoring or publishing system.

Configure and control through any standard web browser, no special tools required. Access the

administrative interface and decoder configuration directly from your PC web browser to configure and

start using the DEC-200™. You have full control via an intuitive graphical user interface.

All DEC-200™ decoders process input streams in full DVB/ DVD-quality for professional output on any

kind of display device.

DEC-200™ combines high-performance with unparalleled simplicity in a compact Ethernet video

decoding appliance designed for commercial, institutional, and industrial applications such as:

 Broadcast/TV Distribution over IP

 IPTV/Confidence Monitoring

 Security/Surveillance/Monitoring/Public Safety

 Medical/Corporate/Military/Industrial Training

 Education/Distance Learning/Tele-Teaching

 Finance/Brokerage Television

 Legal/Legislative Communications

 Manufacturing/Process Monitoring

 Hospitals/Clinics/Telemedicine

 News/Sports/Advertising Agencies – Air/Rail station advertising

The DEC-200™ runs on an embedded Linux platform. This decoder is designed without any moving

parts, as hard drives/fans, to ensure system uptime, reliability and noiseless operation. The DEC-

200™ can be used in extreme operating conditions and at temperatures up to max. 60°C.

The DEC-200™ blades are operated inside the FR chassis series. Blades can be used in the FR-110

single channel chassis or in the FR-210 dual channel chassis. High-density requirements are solved

by operating the DEC blades in the FR-2000 multi-channel rack, which can hold up to max. 21

Teracue blades. Different blade products like the DEC-200™ blades, the ENC encoder blades and

DVB/IP video gateways can be ‘mixed and matched’ in the FR-2000 frame.

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

2. General Information

You can operate the DEC-200™ blades in the FR-110 single blade chassis, in the FR-210 dual blade

chassis or in the FR-2000 multi-channel rack chassis. For example when only a small amount of

decoders is required, or if single channel decoders need to be set up at dispersed network locations.

All equipment (like the chassis) and DEC-200™ accessories are handled as model options and need

to be purchased separately.

2.1 Unpacking the Decoder

When you unpack the ordered equipment, please make sure that all the equipment is complete.

Normally the DEC-200™ blades are pre-fit into the according chassis that the decoders have been

ordered with.

If DEC-200™ blades are ordered and shipped separately, please be careful when handling the blades.

Be sure to avoid electrostatic influence when touching the blades.

After unpacking, your DEC-200™ should include the following:

 1 x Teracue DVD which includes this user guide

 1 x DEC-200™ H.264/MPEG-2 Decoder blade

 1 x Breakout cable ‘S’

2.2 Setting up the Decoder and Safety Instructions

Always read the instructions carefully and keep this user guide for future reference.

Please choose a suitable location for operating the decoder(s).

The DEC-200™ should not be exposed to the following:

 Moist and dusty environments.

 Air humidity above 80%.

 Avoid extreme vibrations or shocks.

 Direct sunlight and extreme heat.

 Temperatures below 0°C and above +65°C.

 Avoid quick and dramatic temperature changes.

.!. Please set up the decoder on a reliable and flat surface when using the FR-110/FR-210

chassis or mount in a rack, when using the FR-2000 chassis.

DEC-200™ H.264 and MPEG-2 Decoder

User Guide V2.7

2.3 Connecting the Decoder (FR-110 chassis)

Please pay attention about the cabling order between the power supply and the FR-chassis. Connect

at first always the connector of the power supply to the FR-chassis.

The cable connector can be locked to the socket of the decoder, so the cable cannot accidentally be

pulled out [Bayonet Socket]. To do so the connector has to be placed on the socket and lightly turned

90° in a clockwise motion.

After you have connected the connector of the power supply to the chassis, please connect the power

cable to the power supply.

As next, please connect the network cable to the network interface and connect your display unit to

the video output of the DEC-200™. Concerning of the video output you have the choice between

different video signal types. The DEC-200™ supports SDI (with embedded audio), Composite, S-

Video, YPbPr, RGB signals. If you need a Composite (CVBS), S-Video (YC), YPbPr or a RGB signal,

please use the Sub-D 26-pin connector via the breakout cable. If you need a SDI or Composite signal,

please use the BNC connector.

If you want use analogue audio, please use the Sub-D 26-pin connector via breakout cable.

Figure 1: DEC-200™ front side

Front panel connection: Description:

Network: Standard 10/100Mbit/s Ethernet via RJ-45

USB: USB-interface.

Video Audio Comport GPIO:

Audio-, Video- and Data Output/Input for Composite, S-Video,

YPbPr, RGB, Audio-In, Audio-Out, GPIO, AES-Out, RS-232,

Genlock-In, Composite-Sync-Out via Sub-D 26 pin interface.

Video: Video Output for Composite or SDI (with embedded Audio) via

BNC interface.

LED:

LED status indicator. The LED indicates the status (operational

state) of the DEC-200 decoder. The status is indicated by the

LED colour and LED flashing (blinking) speed.

LED status: Description:

Constant green:

OK, decoder in operation, decoding video.

Flashing green: OK, but stream input is missing.

Flashing red: Network error. Decoder receives no data

packets.

Constant red: General error.

No LED light: Check power and power supply.

Power supply connector: Cable connector for the power supply.

Table 1: Description of the connectors on the DEC-200™ front side

CVBS = FBAS = Composite Signal

YC = S-Video Signal

Tabla de contenidos

Otros manuales de Convertidor de medios de Teracue

Teracue

Teracue DCH-510P Manual de usuario

Teracue

Teracue DEC-300 Manual de usuario

Teracue

Teracue DEC- Manual de usuario

Teracue

Teracue ENC-500 Manual de usuario

Teracue

Teracue ENC-400-HDM H.264 Manual de usuario

Teracue

Teracue ENC-200 Manual de usuario

Teracue

Teracue ENC-300-HDSDI Manual de usuario

Teracue

Teracue ENC-100 MPEG-2 Encoder Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario