NOTES FOR CALIBRATION:
MODULES ARE CALIBRATED AT THE FACTORY AND SHOULD NOT NEED
TO BE RECALIBRATED. IF YOU DO NEED TO RECALIBRATE, HOWEVER,
YOU WILL NEED ACCESS TO A VOLTMETER WITH AT LEAST 4 DIGITS.
NOTES WHEN UPDATING:
DURING THE WIFI UPDATE PROCESS, YOU WILL NEED ACCESS TO A
COMPUTER TO TRANSFER THE FIRMWARE FILE TO THE QQ2.
WHILE THE WI-FI IS ACTIVE, THE MODULE CAN DRAW AN ADDITIONAL
100mA OF CURRENT, SO MAKE SURE YOUR MODULAR POWER SUPPLY
CAN HANDLE THE EXTRA LOAD.
SETTINGS
CALIBRATE
ENTERING THIS MENU ALLOWS THE
CALIBRATION OF THE CV INPUT AND
OUTPUTS OF EACH CHANNEL, AS WELL AS
THE CV INPUTS OF THE MOD CHANNELS
HOLD ENCODER BUTTON 3 SECONDS
UPDATE
THIS MENU ALLOWS FOR THE SCANNING
OF AND CONNECTING TO WIFI NETWORKS
FOR THE PURPOSES OF UPDATING THE
MODULE'S FIRMWARE.
CALIBRATION 1
CHANNEL SELECTER
SELECT WHICH CHANNEL OR MOD INPUT
YOU WISH TO CALIBRATE
PRESS ENCODER ON CALIBRATE
IN / OUT HIGHLIGHTER
USED TO SELECT WHETHER YOU WISH TO
CALIBRATE THE CHANNEL INPUT OR
OUTPUT.
CALIBRATION 2
REFERENCE INDICATOR
INDICATES WHAT VALUE YOU EITHER
NEED TO INPUT TO THE CHANNEL WHEN
CALIBRATING AN INPUT, OR ADJUST THE
OUTPUT READING TO WHEN CALIBRATING
AN OUTPUT
CHANNEL AND IN/OUT INDICATOR
REMINDS YOU WHICH CHANNEL YOU ARE
EDITING AND WHETHER IT'S AN INPUT OR
OUTPUT
RAW ADC/DAC READING
SHOWS YOU THE LIVE BIT READING OF
THE INTERNAL ANALOG TO DIGITAL
CONVERTER WHEN CALIBRATING AN
INPUT, AND THE DIGITAL TO ANALOG
CONVERTER WHEN CALIBRATING AN
OUTPUT
UPDATE
WIFI SCAN
ENTERING THIS MENU WILL SCAN FOR
LOCAL WIFI NETWORKS AND ALLOW YOU
TO ENTER YOUR WIFI PASSWORD
ALLOWING FOR WIRELESS FIRMWARE
UPDATING. THIS WILL RESTART THE
MODULE ONCE COMPLETE.
PRESS ENCODER ON UPDATE
UPDATE NOW
THIS WILL CONNECT TO THE SELECTED
WIFI NETWORK USING THE CREDENTIALS
ENTERED IN THE "WIFI SCAN" MENU. YOU
WILL THEN BE PROMPTED VIA THE OLED
SCREEN ON HOW TO COMPLETE THE
WIRELESS FIRMWARE UPDATE PROCESS
5
