Telstra T210 Manual de usuario

Telstra T210 Telephone

User Guide

If you have any problems with your phone, firstly refer to

the Help section of this User Guide or call the TecHelp line

on 1300 36 1 3.

Introduction

to your Telstra T210 Telephone

Liquid crystal display

Displays dialed numbers and numbers stored in the memory.

Handsfree operation

Allows you to hold a conversation over the loudspeaker without

lifting the handset.

3 One-Touch memories

Preprogrammed with three Telstra Phone Features which can be

overwritten with frequently used numbers.

10 memories

Allows two touch access to a further 1 most frequently used

numbers.

Call indicator light

Visuaally alerts you to an incoming call.

Last number redial

Redials the last number you dialled

Ad ustable ringer volume and pitch

The ringer volume level and pitch can be adjusted to levels

appropriate for you.

Wall mountable

Can be easily mounted on the wall using the wall-mounting

bracket supplied.

12 month warranty

This User Guide provides you

with the information you need

to get the most from your

phone.

Before you make your first call

you will need to set up your

phone. Follow the simple

instructions on the next few

pages.

Need help?

If you have any problems

setting up or using your Telstra

T21 please contact the

TecHelp line on 13 369 193.

Alternatively, you may find

the answer in ‘Help’ at the

back of this guide.

Got everything?

● Telstra T21 Telephone

● Telephone Line Cord

● Telephone Adaptor Plug

● Wall Mounting Bracket

● Memory Label

Installing your Telstra T21 4

In this guide

Your Telstra T21 can be wall mounted by

screwing directly onto a wall or can be fitted

to a standard telephone wall mount plate.

Using the Handset Cord, plug one end into

the end of the Handset and the other end

into the small socket at the end of the base.

Connect one end of the Telephone Line Cord

into the socket at the bottom of the base.

Connect the other end of the Telephone Line

Cord into the telephone wall socket.

Make sure all the connections are firmly in

place.

Your telephone is now ready to use.

Phone socket

Depending on your wall

socket,you may need to

use the telephone adaptor

plug supplied.

Introduction to your Telstra T210 Telephone 1

In this guide 3

Installing your Telstra T210 4

Wall mounting your Telstra T210 5

Getting to know your Telstra T210 6

Using your Telstra T210 7

Making and receiving calls 8

Redial 8

Mute 9

Handsfree 1

To adjust ringer volume 11

To set the ringer pitch 11

Memories 12

To store a number in the memory 12

To dial a number in the memory 12

To delete stored numbers 13

To insert a pause in a memory number 13

One-Touch memories 14

To store a one-touch number 14

To dial a one-touch number 15

Telstra Phone Features 16

Telstra Call Waiting 16

Telstra 3-Way Chat 17

Telstra Voice Assistant 18

Help 19

If the Telstra T21 will not operate 19

Important Safety Instructions 2

General Information 2

Product warranty & Customer service 21

Wall mounting template 22

Getting to know your Telstra T21 6

Wall mounting your Telstra T21

Ensure that you do not

drill into any hidden

wiring or pipes

Your TelstraT21 can be wall mounted by

screwing directly onto a wall.

Before you can wall mount your T21 , you will

need to fit the wall mounting bracket supplied.

1. Locate the lugs and mount the wall bracket

provided onto the

holes under the

base unit as shown.

2. Swing the wall

bracket down to

clip into the top

hole.

Screwing onto a wall

1. Using the template on page 22, drill 2 holes

25mm deep using a 3mm drill.

2. Insert the wall plugs and

insert a screw into each

hole. Leave 2-3mm

between the head of the

screw and the wall.

3. Position the product

onto the screws.

4. Slide down to secure.

Handset Hook

This hook keeps the handset in place when the

T21 is wall mounted.

Revolve the handset catch on

the base unit. The handset will

now be able to rest on the hook

when wall mounted.

Liquid Crystal

Display

Displays dialed

numbers and numbers

stored in the memory.

Also displays call timer,

and other visible

information.

One-touch Memories

Preprogrammed for

Telstra Call Waiting,

3-Way Chat and Telstra

Voice Assistant.

Memory Button

Allows you to dial up to

ten numbers stored in

the memory at the

touch of two buttons.

Call Indicator Light

Flashes to indicate an

incoming call. Also

flashes when storing

numbers, using mute or

setting the ringer.

Store Button

Use to store numbers in

the memory and to

change the ringer and

pitch volume

Recall Button

For use with Telstra

Phone Features and

PABX’s

Redial Button

Redials the last number

called. Also, press to

enter a pause when

storing a number in the

memory.

Volume

Button

Use to adjust

the volume

during

Handsfree

operation.

Handsfree

Button

Allows you

to hold a

conversation

over the

loudspeaker

without lifting

the handset.

Mute Button

Lets you talk

to someone in

the same

room without

the person

you are calling

hearing you.

Using your Telstra T21 8

A redial number can be no

longer than 32 digits.

If the telephone has been

unplugged,the last number

dialed will not be saved.

Making and receiving calls

To make a call

1. Lift the handset and wait for the dial tone.

2. Dial the telephone number.

The will be shown on the display to

indicate that the phone is in use.

To receive a call

1. When the telephone rings the call

indicator light will also flash to indicate

that there is an incoming call. Simply pick

up the handset.

Redial

To redial the last number called

1. Lift the handset. Press the button. The

last number is displayed and then dialed.

You can also press the button when

the handset is down to check the number

first.

If this is correct, press the button.

The number will be dialed automatically

using Handsfree.

Memory

Getting to know your Telstra T21

Explanation of display icons

bMain display

This will display the phone number

being dialled or the stored number

in memory being dialled.

cPhone icon

This icon will display when the

phone is in use.

dRinger off

This will be displayed to remind

you the ringer is set to off.

eMute

This will be displayed when the

mute button is used.

fHandsfree volume level

This will be displayed when the

speaker volume level on a

handsfree call is changed.

1234567890OOOO

RINGER OFF MUTE

Using your Telstra T21

Mute

When on a call you can talk to someone in

the same room, without your caller hearing.

To switch mute on and off

1. During a call press and release the

button.

The caller will be put on hold. You can

now talk to someone in the room without

your caller hearing you.The display will

flash MUTE to confirm mute is on.

2. Press and release the button again to

return to your callers.

Using your Telstra T21 1

Important:

Your Telstra T21 is specially

designed to operate without

the need of a mains power

supply.It is therefore

necessary to make your first

call via the handset.This call

should last at least 1 minute.

Subsequent calls can now be

made using the handset or

Handsfree feature.

You can swap between the

handset and handsfree

during a call.

If using the handset,press the

button and replace the

handset.

If using handsfree, lift the

handset to talk privately.

You can only change the

volume of a call when using

handsfree.

Handsfree Operation

The handsfree feature allows you to use the

phone without picking up the handset,

giving you more freedom when you are

speaking on the phone. You can hear the

caller’s voice through the in-built speaker.

To make a handsfree call

1. Press the button.

The handsfree light will come on and you

will hear the dial tone. The display will

also show the volume level.

2. Dial the telephone number.

You can now talk to your caller through

the microphone, or pick up the handset to

speak to your caller privately.

To receive a call using Handsfree

1. Press the button when the phone

rings.

To change the volume on a handsfree

call

You can adjust the speaker volume when

you are on a handsfree call.

1. Press the button. The volume level

will be shown on the display.

There are 5 levels to choose from. It is pre-

set to the mid-range level.

2. Press the button to move up and

down each level.

Using your Telstra T21

If the ringer is set to OFF, the

call indicator light will still

flash to indicate somebody is

calling you.The display will

show RINGER OFF when

you lift the handset or use

handsfree.

To ad ust the ringer volume

There are 3 volume settings to choose from:

HIGH, LOW or OFF. The default setting is

HIGH.

1. Lift the handset and press the button.

2. Press the button.

The display will show: BELL LEVEL HI.

3. Press either for HIGH, for LOW or

for OFF.

4. Press the button.

Your selected setting will be displayed.

You will hear a confirmation tone and the

display will show SAVED.

5. Replace the handset.

To set the ringer pitch

The ringer pitch can be set to High or Low.

The default setting is High.

1.Lift the handset and press the button.

2. Press the button.

The display will show BELL Pitch HI.

3. Press either, for HIGH or for LOW.

4. Press the button.

You will hear a confirmation tone and the

display will show SAVED.

5. Replace the handset.

Store

Using your Telstra T21 12

Numbers can be no longer

than 18 digits long.

You can mix manual and

memory dialing as required,

for example,you can dial the

area code 2 83 4 from the

memory and then complete

the number manually.

Memories

You can store 1 telephone numbers in the

memories.

To store a number in the memory

1. Lift the handset.

2. Press the button.

3. Press the memory location number

between and 9 under which you want to

store the number. The display shows, e.g.

Loc-8 if you want to store in location 8.

4. Enter the telephone number you want to

store, including the area code if applicable.

5. Press the button.

You will hear a confirmation tone and the

display will show SAVED.

6. Replace the handset.

To dial a number in memory

Lift the handset and wait for dial tone.

1. Press the button.

Enter the memory location number

between and 9, under which the number

is stored.

The number is displayed and dialed

automatically.

Memory

Store

Using your Telstra T21 14

For mor information on these

features please call 13 22 .

Please note that the number

can be no longer than 18

digits.

Whilst storing a number in

the memory you can cancel

the operation by replacing

the handset on the cradle.

If you delete a number in any

of the One-Touch memories,

the key automatically reverts

to its factory programmed

Telstra Network Feature.

A blank memory label is

provided to note your

frequently used numbers.

One-Touch Memories

The Telstra T21 comes with 3 Telstra Phone

Features preprogrammed into the M1,M2

and M3 buttons. Should you wish, these can

be overwritten with your own frequently

dialed numbers.

To store a One-Touch number

1. Lift the handset.

2. Press the button. The display will

show Loc-.

3. Press the network feature button, under

which you want to store the number.

The display will show, e.g.Loc-d1 if you

want to store under Call Waiting button or

M1.

4. Enter the telephone number you want to

store including the area code if applicable.

5. Press the button.

You will hear a confirmation tone and the

display will show SAVED.

6. Replace the handset.

Store

Using your Telstra T21

If any errors occur in the

storing mode you will hear

three short beeps,then the

product will return to talk

mode.

If you unplug your Telstra

T21 the numbers stored in

the memory will be saved.

However, the last number

redial memory will be lost.

To delete stored numbers

Lift the handset

1. Press the button.

Enter the memory location number ( -9)

under which you have stored the number

you wish to delete.

2. Press the button. You will hear a

confirmation tone.

Replace the handset.

Alternatively, any existing number stored in

the memory can be overwritten by entering

a new number under the same memory

location. Simply follow the instructions

under the storing number section previously

shown.

To insert a pause in a memory number

Sometimes you may need to enter a pause

when storing a number, e.g. with an overseas

number you may need to enter a pause after

storing the international code.

1. Press the button in the place where

you want to enter a pause. When you dial

the number your T21 will automatically

insert the pause where you stored it.

Store

Telstra Phone Features 16

You may need to activate

Calling Waiting on your

telephone.To turn Call

Waiting on or off,press the

Telstra Voice Assistant button

and follow the voice prompts.

Your Telstra T21 provides easy access to 3

popular Telstra Phone Features*.

Call Waiting

3-Way Chat

Telstra Voice Assistant

* Available most areas.

Telstra Call Waiting

While you’re on a call, a Call Waiting tone

(initially two beeps following an alerting

tone, then two beeps every five seconds) lets

you know that there is a second incoming

call.

Answering a waiting call

1. Press the button.

The first call is put on hold and you can

talk to the second caller.

Alternating between callers

2. Press the button.

The second caller is now put on hold and

you can talk to the first caller.

CallCall

WaitingWaiting

CallCall

WaitingWaiting

Using your Telstra T21

To dial a One-Touch number

1. Lift the handset and wait for the dial tone.

2. Press the memory location number, under

which the number is stored.

The number is dialled automatically.

You can also dial a One-Touch number

when the handset is down. Simple press

the memory location number. Your Telstra

T21 will automatically dial the number

using handsfree.

Telstra Phone Features 18

Telstra Voice Assistant

Telstra Voice Assistant is designed to make

using Telstra’s phone features easier and

provide you with information about them.

There’s no need to remember special codes

to turn your phone features on or off: just

press the button and tell your

phone what to do.

Telstra Telstra

Voice Voice

AssistantAssistant

Telstra Phone Features

Applicable usage charges and

call costs apply. Telstra 3-Way Chat

If you are already on a call, you can make

another (inquiry) call to a third person, after

you put the first caller on hold. If you wish,

you can then have a three-way conversation

(conference).

The Call Waiting feature (if turned on) will

not operate while you are holding a

conference call.

To make an inquiry call while already

on a call

1. Press the button and listen for dial

tone.

2. Dial the telephone number of the third

person. If the person is busy or does not

answer, press the button to return to

the first caller.

To establish a three-way conversation

1. Press the button.

All parties are now connected.

To end a three-way conversation

1. Press the button.

This places the last party on hold and the

original call remains connected.

The user can then toggle between callers

using the button.

CallCall

WaitingWaiting

CallCall

WaitingWaiting

3 - Way3 - Way

ChatChat

Tabla de contenidos

Otros manuales de Teléfono de Telstra

Telstra

Telstra T310 Manual de usuario

Telstra

Telstra T1000S Manual de usuario

Telstra

Telstra T-HUB 2 Manual de usuario

Telstra

Telstra 8950 Manual de usuario

Telstra

Telstra customnet Manual de usuario

Telstra

Telstra SP817BB Manual de usuario

Telstra

Telstra Access 200 Manual de usuario

Telstra

Telstra Touchfone 400 Manual de usuario

Telstra

Telstra T1000C SMS Manual de usuario

Telstra

Telstra Access 200 Manual de usuario

Telstra

Telstra T310 Manual de usuario

Telstra

Telstra A248 Manual de usuario

Telstra

Telstra Commander E105 Manual

Telstra

Telstra A60 Manual de usuario

Telstra

Telstra Priority Assist Phone Manual de usuario

Telstra

Telstra T1000S Manual de usuario

Telstra

Telstra Cisco 7861 MPP Manual de usuario

Telstra

Telstra VVX500 Manual de usuario

Telstra

Telstra T48G Manual de usuario

Telstra

Telstra 13450 Manual de usuario

Telstra

Telstra TSH-D Instrucciones de montaje

Telstra

Telstra VVX 1500 Manual de usuario

Telstra

Telstra SP817BB Manual de usuario

Telstra

Telstra T1000C SMS Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario