Telstra F2400 Manual de usuario
Telstra F2400
Digital DECT Cordless Telephone
User
Guide
F2400 extension
If you have any problems with your phone, first refer to the Help
section of this User Guide or call TecHelp line on 1300 36 1 3.
Introduction
to your Telstra F2400
Digital DECT Cordless Telephone
● 30 name & number Phonebook
● Telstra Calling Number Display*
● Handsfree operation
● Large keypad buttons
* Monthly charges apply. Service available in most areas.
Not available for blocked calls.
As a Digitally Enhanced Cordless Telecommunications
(DECT) product, your Telstra F2400 provides: -
● Digital clarity
● Digital range
● Digital security
IMPORTANT
This equipment is not designed for
making emergency telephone calls
when the power fails.
Alternative arrangements should be
made for access to emergency
services.
This User Guide provides you with all
the information you need to get the
most from your phone.
Before you make your first call you
will need to set up your phone. Follow
the simple instructions in ‘Getting
Started’, on the next few pages.
Need help?
If you have any problems setting up or
using your Telstra F2400 please
contact the TecHelp line on
1300 36 1 3.
Alternatively, you may find the
answer in ‘Help’ at the back of this
guide.
Got everything?
● Telstra F2400 handset
● Telstra F2400 base unit
● 2 x AAA NiMH rechargeable
batteries
● AC power adaptor
● Telephone line cord
● Telephone adaptor plug
In this guide
3
Getting started 5
Setting up 5
Getting to know your phone 7
Handset buttons 7
Base unit 8
Display icons
Using the phone 0
Receiving calls 10
Making calls 11
Handsfree facility 11
Dialling stored numbers from
the Phonebook 12
Call duration display 12
Switching the handset on and off 13
Range information 13
Muting the microphone in the
handset 14
Adjusting the receiver volume 14
Redial facility 15
Deleting redial numbers 15
Deleting all redial numbers 16
Keypad lock 16
Paging from the base station
to the handset 17
Phonebook 8
Entering numbers in the
Phonebook 18
How to enter names 1
Changing numbers stored in the
Phonebook 20
Deleting stored numbers from the
Phonebook 22
Telstra Network Services 23
Telstra Calling Number Display 23
Calls list 23
To view the phone numbers on
the Calls list 24
Storing phone numbers from the
Calls list to the Phonebook 25
Deleting individual numbers
from the Calls list 26
Deleting the entire Calls list 27
Telstra Home Message 101 &
MessageBank® 28
Flashing Message Indication 2
Recall 30
Using pause 31
In this guide 4
Special functions 32
Menu structure 33
Setting the ring tone on the
handset (ring melodies) 34
Ring tone volume on the handset 35
Setting the ring tones on the
base unit (ring melodies) 36
Ring tone volume on the base unit37
Auto answer 37
Changing display names 38
Activating / Deactivating
warning tones 3
Changing the PIN code 40
Setting the display language 41
Setting the Flash (Recall) time 42
Restoring factory settings 43
Using the Telstra F2400
additional handsets 45
Multiple handsets 45
Making an internal call 45
Connecting external calls to
another handset 46
Logging on Telstra F2400
additional handsets 47
Logging on other DECT-GAP
telephones to the base unit 48
Logging on a handset to another
DECT-GAP base unit system or a
third party base unit 48
Logging off handsets 4
Additional base stations 50
Selecting a base station 51
Help 52
General information 54
Technical data 55
Product warranty & Customer
service 56
WARNING
Do not place your
Telstra F2400 in
the bathroom or
other humid areas.
IMPORTANT
The power adaptor
must always be
connected. For
safety reasons, use
only the power
adaptor provided.
Setting up
Follow these steps to set up your Telstra F2400 ready for
use
Location
You need to place your Telstra F2400 base unit close
enough to a mains power and telephone socket so that the
cables will reach.
The strength of the handset signal depends on where you
site the base. Putting it as high as possible can help to
provide the best signal. Make sure it is at least 1 metre
away from other electrical appliances to avoid
interference.
Setting up the base and handset
1. Insert the plug of the power adaptor into the socket on
the back of the base unit
Getting started
5
Talk/Standby
times
Under ideal
conditions, the
handset batteries
should give about
10 hours talk time
or 100 hours
standby on a
single charge.
Note
New batteries do
not reach full
capacity until they
have been in
normal use for
several days.
The charging light
on the base
station will come
on, if the battery
capacity is too
low, the
symbol will flash
in the display and
you will hear
warning tones
every 60 seconds.
2. Plug the power adaptor into the mains wall socket and
switch the power on.
3. Install the 2 x AAA rechargeable batteries supplied into
the handset by pressing on the upper edge of the
battery compartment and slide it downwards. Now
insert the batteries taking care to ensure that the
polarity is correct. Close the battery compartment cover.
4. Place the handset in the base station with the display to
the front for at least 6 hours.
The current battery capacity is shown in the display.
Full Half Low
5. Once fully charged, connect the telephone cable
supplied to the telephone socket and the telephone jack
on the back of the base station. Use only the new
telephone cable & adaptor provided.
Your Telstra F2400 is ready for use.
Customer Helpline
If you have any difficulties setting up your
Telstra F2400 please call the TecHelp line on
1300 36 1 3.
Getting started 6
Handset buttons
Handsfree
Activates handsfree
mode.
Delete / Mute
button
Delete and edit
numbers. During a
call, press to stop
your caller hearing
you, page 14.
Phonebook / Exit
menu
Used to recall
names and numbers
from the
Phonebook,
page 18.
Also used to exit
Menu operations.
Recall button
For use with Telstra
network services
and PABX’s,
page 30.
Call indicator
Redial
Selection button to
choose an operation.
Opens the Calls list and
scrolls through the
entries, page 15.
✓Menu button
Press to access menu or
activate an operation.
Phone button
Press to make, receive
or end calls, page 10.
Calls List
Selection button to
choose an operation.
Opens the Calls List and
lets your scroll through
entries, page 24.
Internal calls
To make internal calls
or transfer between
handsets registered to
the base, page 45.
Getting to know your phone
7
D
i
g
i
t
a
l
C
l
a
r
i
t
y
123
456
78
0
R
A
B
C
Redial
Menu
Calls
List
Mute
D
E
F
G
H
I
J
K
L
M
N
O
W
X
Y
Z
T
U
V
P
Q
R
S
Int
R
e
c
a
l
l
Exit
Base unit
PAGE button
Press to page the
handset(s), page 17.
Power / In Use
Comes on when
connected to a power
supply and flashes
when a handset is in
use.
Charge light
Goes a steady red
when the handset is
charging, page 6.
Getting to know your phone 8
Page
Telstra F2400
Display icons
In the normal operating mode, the display shows the names of the handset.
The pre-set name can be changed at any time. For more information, refer to
page 38. In addition, the main functions are shown in the display by means of
various symbols.
You are making a call.
Handsfree mode on.
You are making an external call.
Flashing: You are receiving an external call.
Steady: You are making an internal call.
Flashing: You are receiving an internal call.
There are new calls stored in the calls list (CND)
This number in the calls list has already been called back.
This call was answered.
Flashing: Please charge the handset.
Steady: Indication of battery capacity.
Cycling through the segments: The handset is being charged.
When the phonebook is being used.
When in menu operation.
The keypad lock is activated.
Steady: The connection to the base unit is satisfactory.
Flashing: Base unit is out of range.
The number is longer than 12 digits.
Flashing Message Indicator icon.
Getting to know your phone
Otros manuales para F2400
1
Otros manuales de Teléfono inalámbrico de Telstra
Telstra
Telstra V580 Manual de usuario
Telstra
Telstra 8200 Manual de usuario
Telstra
Telstra 8850 TRIPLE Manual de usuario
Telstra
Telstra Easy View 3400 Twin Manual de usuario
Telstra
Telstra 13500 Manual de usuario
Telstra
Telstra 13150 Manual de usuario
Telstra
Telstra Long Range 9750 Manual de usuario
Telstra
Telstra TCG301 Instrucciones de montaje
Telstra
Telstra f5000 Manual de usuario
Telstra
Telstra V900 TWIN - Manual de usuario
Telstra
Telstra EASY CONTROL 202 Instrucciones de montaje
Telstra
Telstra 13650 Manual de usuario
Telstra
Telstra Slim Touch 9650 Manual de usuario
Telstra
Telstra 5600 Manual de usuario
Telstra
Telstra Slim Touch 9650 Manual de usuario
Telstra
Telstra 6100 Manual de usuario
Telstra
Telstra 7400 Manual de usuario
Telstra
Telstra F5050 Manual de usuario
Telstra
Telstra COLOMBO NEUE Manual de usuario
Telstra
Telstra TEC-C Manual de usuario
