Telstar MP07 Manual de usuario

MP07-1

1. Description of Product Function

This projector is the auxiliary product for both iPhone 4 and iPhone 4S,

which can project the videos and images downloaded from the internet

and shot by iPhone on the screen. It has an audio output with volume

control and a focus adjustment wheel. This product can be charged by

using an A/C charger or a USB cable when connecting to a computer.

This projector can also be used as a charger for your iPhone 4/4S with its

built-in 2100 mah big capacity rechargeable battery.

2. External View

MP07-2

1. Lens

2. Interface

3. Cooling Holes

4. Speaker

5. Focus Wheel

6. Vol +

7. Vol -

8. USB Jack

9. Status Led

10. Power

3. Projector Overview

MP07-3

iPhone the red light will be on.

When the charging is completed, the green light and red light will be on.

When the projector is in operational mode, the blue light will flash.

When the battery capacity of the projector is low (less than 3.45V), the

blue light will flash fast, and the machine will power off automatically in

one minute.

5. Turn on/Turn off the Projector

Push and hold the power switch rightward for 3 seconds to turn on the

projector.

Push and hold the power switch rightward for another 3 seconds to turn

off the projector.

6. Focus Adjustment

When in use, you can adjust the focus to obtain a better video effect.

7. Volume Adjustment

When the audio files are playing, you can adjust the volume by pressing

the two buttons "+" or "-"on the left side.

4. LED Indicator Light

When the projector is charging, or when the projector charges your

MP07-4

Video Display

1. Connect the projector and iPhone 4/4S.

2. Turn on the projector.

3. Select video files to display in the main interface of your iPhone. Then

press "Play".

4. Adjust the volume by pressing the buttons of "+" or "-".

Note: If the following interface appears, please turn on the

projector again and re-display the video.

This accessory is not supported by iPhone

Dismiss

Note: In order to ensure the complete display of the video recorded by

iPhone, it is recommended to place the iPhone horizontally when

recording videos.

Picture Browsing

1. Connect the projector and iPhone 4/4S.

2. Turn on the projector.

3. Select picture file to display in the main interface of iPhone 4/4S,

choose one of the pictures, then press "Play", then press "Start

8. Functions and Operation

Slideshow

5. In order to project the complete display of the video, it is

recommended to select PAL under TV Out section on your iPhone4 or

iPhone4S device. (Settings/iPod/TV Out/TV Signal/PAL)

MP07-5

the other end to a computer USB interface or an iPhone charger.

2. When the LED indicator light becomes red, it is to charge.

3. As soon as the charging is completed, the red and green LED indicator

lights will be constantly on.

Charging the iPhone 4/4S

1. Connect the projector and iPhone 4/4S.

2. Slide the power switch to the left; it will charge iPhone 4/4S through

the projector.

3. When charging iPhone 4/4S through the projector, the LED indicator

light will become red.

4. When the battery capacity of projector is lower than 3.3V, it will stop

charging the iPhone to protect the projector battery.

Charging the Whole Set (the projector and the iPhone)

1. Connect the projector and iPhone 4/4S.

2. Connect the USB cable.

Connect one end of USB cable to the USB interface of the projector, and

the other end to a computer USB interface or an iPhone charger.

3. Charging

3.1 When the projector is turned off, the external power will

charge the projector first, and the red LED indicator light will

remain on; when the charging completes, the green and red LED

1. Connect the USB cable.

Connect one end of USB cable to the USB interface of the projector, and

Charging

Charging the projector

MP07-6

charge the projector first, when the charging completes, the

external power will automatically switch to charge the iPhone, the

red LED indicator light will remain on and the blue LED indicator

will flash.

3.3 When the projector is charging the iPhone, the external power

will charge the whole set, the red LED indicator will remain on.

Management Document

You can copy or delete the pictures and video documents in your iPhone

4/4S through connecting the projector to a computer.

1. Connect the projector and iPhone 4/4S.

2. Connect one end of the USB cable to the USB interface of the

projector and the other end to a computer USB interface.

3. Slide the power switch to the left; the following picture will appear:

indicator lights will remain on, then the external power will start

charging the iPhone.

3.2 When the projector is in operation, the external power will

MP07-7

Scanner and Camera Wizard

Welcome for your using of Scanner and

Camera Wizard

Apple

iPhone

This wizard will help you to copy your photos

from camera, scanner or other equipment to

computer, network or web.

If you are willing, you can operate directly

from the equipment. It is recommended that

Only Power User can use this.

Press "Next" to continue.

Back Next Cancel

Scanner and Camera Wizard

Select the pictures to be copied

The picture with tick wil

l be copied. Click the

picture to rotate it or check for its properties.

All delete/all select

Select 9 pictures, all of 9 pictures

Back Next Cancel

MP07-8

Finished.

When copying or deleting documents through connecting the

projector to a computer, the computer will charge the whole set

automatically. The description is the same as "B".

Picture

Name and target file of the picture

Select one name and target file for your picture.

1. Enter a name for these picture:

2. Select the saved place for these pictures(C):

My Pictures/Photo

After copying, delete the pictures from the equipment (D)

Back Next Cancel

Scanner and Camera Wizard

MP07-9

9. Specification:

Basic Parameters

Lumens Maximum 12~ 15 ANSI lumens

Resolution Ratio 640 * 360

Super Capacity Battery 2100mah

Aspect Ratio 16:9

Contrast Ratio 1000:1

Dimensions 126.6 * 63.5 * 22mm

External Power DC5V/2A

Input Terminal Port Only support iPhone 4 and iPhone

4S signal input

Image Size 510mm * 974mm

Throw Distance 488mm-2922mm

LED RGB three colours

LED Bulb Life More than 20,000 hours

Volume Manual Operating

Focal Length Manual Operating

Play Time ≤2.5 hours

Charging iPhone 4/4S Can provide 80% energy for iPhone

Weight 105g

Tabla de contenidos

Manuales populares de Accesorios para teléfonos celulares de otras marcas

Valore

Valore AC14 Manual de usuario

X-cam

X-cam X-CAM T3 Manual de usuario

Nokia

Nokia AD-5B Manual de usuario

Bauhn

Bauhn ABSS-1222 Manual de usuario

ReSound

ReSound Phone Clip+ Manual de usuario

Mpow

Mpow ISNAP X1 Manual de usuario

Zartek Mobile

Zartek Mobile ZA-350 Manual de usuario

Playbrush

Playbrush Playbrush Manual de usuario

Sony

Sony SCR44 Manual de usuario

Nautilus

Nautilus V5 Manual de usuario

BigPantha

BigPantha Phone Mount Manual de usuario

PRYME Radio Product

PRYME Radio Product PRYMEBLU BT-PTT-M Manual de usuario

Nokia

Nokia CR-119 Manual de usuario

weBoost

weBoost eqo Manual de usuario

Rollei

Rollei LUMIS Manual de usuario

Morphie

Morphie Juice Pack Helium Manual de usuario

Lenovo

Lenovo SS100 Manual de usuario

Philips

Philips DLA4214 Manual de usuario