Telit Wireless Solutions GainSpan GS2200M Manual de usuario

1VV0301455, Rev 1.1

This Quick Start Guide will walk you through the steps required to

demonstrate HomeKit ADK on GS2200M EVB (Evaluation Board).

GS2200M Hostless HomeKit

Supports GS2200 Modules

ADK Quick Start Guide

The GS2200M_EVB3 has the GainSpan Wi-Fi module and the

Apple Wireless Accessory Configuration (WAC) installed on the

board. Your kit contains:

• Quick Start Guide (this document)

• GS2200M_EVB3 Evaluation Board with WAC

• Serial Cable (USB to Mini-USB)

• Preloaded Firmware

• Flash Programming Tool

• iOS devices with the Home APP from iOS store.

1 Build the Firmware

Step3 Open GainSpan Serial Flash Programmer GUI applica-

tion from "\Tools\GS_programming_tool\gs2k_flashprogram.exe"..

Step4Select the interface and the port with Baud rate 921600.

Click Check Connection.

Step5Once the “Connection OK” is displayed, select “Super

Block” and “Current Firmware version” that is located in

“\QuickStart”.

Step6 Click Erase and Program Button.

A green check mark at the lower-right corner of the application win-

dow, indicates successful programming of the module with a dis-

play.

Step 1 Login at https://wifi.telit.com/secure/login, select SDK

Builder tab and proceed to select the following options for ADK

package as shown below:

If you do not have a login, sign up and register for a Portal account

at:

https://wifi.telit.com/secure/register

Step 2 Click Next to navigate to the build option.

Step 3 Click Build to generate the HomeKit binaries. The build con-

figuration is submitted and a confirmation e-mail is sent notifying that the

HomeKit Custom package is complete and ready to download.

Download and unzip the package, for firmware binaries.

2 Program the GS Module

Step 1 Plug the mini-USB cable, one end of the USB port to

GS2200MIZ board USB0 and the other end of the USB port to the com-

puter or laptop.

Step 2 Turn the PROGRAM/RUN switch to PROGRAM mode on

the EVB and perform a power cycle (switch OFF and switch ON the

power switch)

1VV0301455, Rev 1.1

Setup the Serial port:

• Port: COMx (where, x is the COM port number)

• Baud Rate: 115200

• Data: 8 bit

• Parity: none

• Stop: 1 bit

• Flow Control: none

4 Light Sensor Demo

Note: To verify the correct COM port, open Windows

Control Panel and select Device Manager and Ports

associated with the board.

Open a Serial Terminal Emulation Software of your choice. Select

the serial COM port associated with the board. In this example we

are using Tera Term VT. You can download a copy of

Tera Term VT at:

http://ttssh2.sourceforge.jp/

Step 1Ensure that the PROGRAM/RUN switch (SW8) is in RUN

mode. Turn the ON/OFF switch (SW6) to the ON position.

Step 2 Power ON (SW6) by turning it OFF/ON and check the

terminal emulator displays board information and the command

prompt to perform provisioning and to run the demo:

Step 4 Put the PROGRAM/RUN switch to RUN mode.

3 Configure the Serial Port

Note: For GS2200M EVB, connect Jumper J13 - GPIO Pro-

gram Select for Baud Rate 921600 Step 3 Connect to a network. This can be performed in

following ways:

• Manual Method Using SSID and PWD Commands

• WAC Provisioning Method

Step 4 In the terminal emulator displays board information

type DEMO 2 (Light Sensor) to start the demo and start the EVB

as a station using the INFRA command, or as a limited AP using

the WEB command.

Note: After every command, enter any key to EXIT from

DEEPSLEEP mode.

For GS2200MEVB- Jumper J34 and Jumper J37has has to

be shorted.

Step 5 Open the iOS device, go to Wi-Fi settings and connect

to GainSpan AP “GainSpan_AE”.

For WAC Provisioning refer GS2K Hostless HomeKit

User Guide, section - Running HomeKit Test App.

This QSG provides steps for Manual mode.

1VV0301455, Rev 1.1

Step 6 Launch “HOME App" from iOS device and tap Add

Accessory.

Step 7 Select the accessory to be add to the HomeKit.

Step 8 Enter the pass code manually, that is the default

authentication code 101-48-505.

Step 9 HOME App pairs and authenticates the HomeKit

Accessory.

Step 10 Upon successful Pairing, tap Done.

1VV0301455, Rev 1.1

Step 11 The light sensor value will be displayed on the

HOME App.

The light sensor on the EVB is located along the top left side of

the board, labeled as Q10.

The light sensor value can be changed using a torch or by

covering the sensor and the values can be monitored in the

HOME App.

Refer to the GS2K Hostless HomeKit User Guide for other

serial commands to read and write other service properties.

For information, please refer to the following documents:

• GS2K SDK Builder User Guide

- Configuring and generating custom S2W firmware binary

images from web portal based on features required

• GS2K Module Programming User Guide

- How to Program the module

• GS2K SDK Application Programming Guide

- If SDK is purchased, for setting up, compiling, and debugging

firmware using IAR IDE. This also has reference codes for var-

ious use cases, debugging mechanisms, detailed description

of various modules and features and much more

•GS2K S2W Use Case Reference Guide

- For sequence of AT commands to be used for any particular

use case

• S2W Adapter Command Reference Guide

- For detailed description of every AT command

• GS2K Live Calibration Application Note

- For calibrating the module for optimum reception, which needs

to be done once in the lifetime of the product unless the flash is

erased completely for some reason

• GS2K Memory Map and File System Application Note

- Provides the memory architecture of the Wi-Fi modules and

details about types of memory, location, and content of various

items in these memory locations

For further information, please visit the website link:

https://www.telit.com/products/wifi-and-bluetooth/#wifi

Technical and Product Support

For any clarification, technical and product support, please

email to Telit Technical Support at:

[email protected]

We recommend adding “Wi-fi” in subject of the email. For exam-

ple, the subject of email can be “Wi-Fi: Association failing”, “Wi-

Fi: SPI Driver Issue”.

Also, in description of your email, please provide details about

the issue, product, module and use case including software firm-

ware version, module version and type, application being used,

customizations done to application, use case and issue fre-

quency and ability to recreate it.

Information

Otros manuales para GainSpan GS2200M

Otros manuales de Placa madre de Telit Wireless Solutions

Telit Wireless Solutions

Telit Wireless Solutions SC872-A Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB S2W Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manual de instalación

Telit Wireless Solutions

Telit Wireless Solutions Bravo EVK Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions Bravo Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions Bravo Instrucciones de instalación y funcionamiento

Telit Wireless Solutions

Telit Wireless Solutions LE910C-EU Series Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions WL865E4-P Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions EVK2 Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions GS2200M SKB TLS Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SE868V2 Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manual de instalación

Telit Wireless Solutions

Telit Wireless Solutions Jupiter SL869 Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions WE310F5-I Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions EVB 2.0 Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions JF2 EVK Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-V3 EVK Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions EVB Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions xE910 Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions CHARLIE Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario