3rd page:
Multicast MAC Address: The MAC Address of multicast sending in ‘To multicast’ mode in
hexadecimal format.
Streaming mode: Stopped: No TS output
Unicast to IP: TS sending in the local network without
gateway
Through Gateway: TS sending through a gateway if we use a
router to connection
To Multicast: TS sending to Multicast destination
4th page:
System bitrate: The set full TS bitrate in kilobits per second (=kbps).
Video bitrate: Comes from the system bitrate and audio bitrate. Also depends on
the PSI tables.
5th page:
Audio bitrate: The rate of the audio coding in kbps, possible values are:
32, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320, 384
Audio Status: Indicates that there are embedded audio: Present or not: Muted
6th page:
The set PID values: PMT, VIDEO, AUDIO, PCR shown in hexadecimal format. The possible
values of PIDs are in 0x0020 … 0x1FFF range.
7th page:
Program ID: The Program identifier in hexadecimal format. The possible values
of this ID are in full 0x0000 … 0xFFFF range.
Program Provider: The name of program provider in maximum 20 characters.
8th page:
Program Name: The name of the program in max. 20 characters.
PSI Table Generator: Enabled / Disabled: The enabling of PSI tables. They contains:
PMT PID, Program ID, Program Provider, Program Name, Stream
ID, Network ID, Repetition Time, Network Name
