3Opcal Fibre Outlet Series
ENLIGHTEN Opcal Passives TEN-FWO1 Installaon Guide Rev. 1.00/11.2019
Thank you for purchasing this Teleste product. Please take a moment and
carefully read these instrucons through before installing the product.
General Preparaons and Precauons
1. Check the Fibre Outlet, cable items and all other components for
any damages before installaon.
2. Make sure to keep all components dry and clean for the
installaon.
3. Keep the working environment clean (dry and no dust) and at for
the installaon.
4. Standard instruments and tools should be used during the
installaon.
Preparaon of the Incoming Opcal Drop Cable
1. Determine the length of cung the drop cable.
2. Strip the drop cable as per details in the next secon.
Installaon Guidelines
1. Press on the front side of the box, open the cover.
2. For boom cable entry remove the plasc clip covering the boom
side cable entry, see Picture 1.
Installaon
Instrucons
Note! Opcal bres should not be
damaged. Cut the damaged bre,
and re-strip the bre if an accident
occurs.
Picture 1
Warning! Never look directly into
the end of a bre or a bre connec-
tor that may be carrying laser light.
Laser light, visible or invisible, can
seriously injure eyes or even cause
blindness.
Warning! Ensure to follow basic
safety precauons to reduce risk of
re, electrical shock, and personal
injury.
