Telemark Cryogenics Microprocessor Based Cryochillers
Page 10 of 63
Revision 1.0.7 October 2018
WARRANTY
Telemark Cryogenics Cryochiller products are warranted to be free from
defects in materials and/or workmanship under normal usage until warranty
effective date listed on serial number label. Telemark Cryogenics’ obligation
under this Warranty is limited to the repair or replacement, at its option, of any
parts, which upon examination at the Telemark Cryogenics factory or by an
authorised sales/service representative, shall appear to have become
defective. Correction of defects by repair or replacement shall be either at the
Telemark factory or in-situ by an authorised service representative. The
location of repair shall be at the discretion of Telemark Cryogenics. Repairs
carried out at Telemark Cryogenics factory shall be FOB Telemark factory
and shall constitute fulfilment of obligations to the purchaser. All
transportation costs for defective parts or products shall be borne by the
purchaser. Telemark Cryogenics will not be liable for loss, damage, or other
expenses directly or indirectly arising from the use of its products or from any
other causes. Telemark assumes no liability for expenses or repairs made
outside of its factory by non-authorised personnel.
All claims on account of defective material or workmanship shall be deemed
waived unless made in writing within the aforementioned warranty period.
The foregoing Warranty is in lieu of all other warranties expressed or implied.
Telemark neither assumes nor authorises any other person to assume any
other obligation or liabilities in conjunction with the sale of its products. This
Warranty shall be void if the equipment has been subject to misuse,
negligence or application outside of recommended operating environment or
conditions. The Warranty will also be invalidated if the identification numbers
of the system have been altered, defaced or removed.
The Warranty is not intended to supplant any statutory rights the purchaser
may have.
Unit start and end dates are printed on the unit’s serial number label.
USER RESPONSIBILITY
The user is responsible for proper installation, operation and ordinary
maintenance of the equipment following the procedures in this manual. The
warranty may be void if the equipment is improperly installed. Alteration of
the design and or any function of the equipment voids the warranty and is
entirely the responsibility of the user.
Telemark will not be held responsible or liable for either director
consequential personal injury or loss claims arising from the misuse of the
product
The user should read this manual in its entirety before carrying out any
work and or operation of a Telemark Cryochiller.
