Teledelta HD100 Series Manual de usuario

Quick Start Guide

HD100 Series Encoder

HDMI/SDI/SD Card Encoder with IP Output

Shipping IP Address: 192.168.1.100

UN / PW: admin / admin

www.teledelta.com 
Page 1 
Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1
Contents 
Electrical and general safety...................................................................................................................2 
General Precautions............................................................................................................................2 
Important note....................................................................................................................................2 
Introduction ............................................................................................................................................2 
Installation ..............................................................................................................................................3 
Logging In................................................................................................................................................3 
Status Page:.............................................................................................................................................3 
Navigating the HD100 Menu...................................................................................................................4 
Live Service / Streaming Settings............................................................................................................4 
Comment on YouTube / Facebook and 3rd Party Streaming ..............................................................5 
Authorize your Device (YouTube / Facebook) ................................................................................5 
Manual Encoder Setup (UDP, RTMP, RTMPS, HLS, RTSP)...................................................................6 
Basic Settings ..................................................................................................................................6 
Advanced Setting ............................................................................................................................7 
Record / FTP Upload Settings .................................................................................................................8 
Recording to USB / SD Card ................................................................................................................9 
FTP Upload..........................................................................................................................................9 
Playback and Streaming....................................................................................................................10 
Output Settings (Playback)................................................................................................................10 
Overlay Settings (Text and Images) ......................................................................................................11 
Text Overlay......................................................................................................................................11 
Picture Overlay..................................................................................................................................12 
System Settings.................................................................................................................................12 
Reboot / Factory Setting and Logging...............................................................................................13 
Technical Support .................................................................................................................................13 
Document Information .........................................................................................................................14 
 
 
 

www.teledelta.com

Page 2

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Electrical and general safety

Any personnel installing, operating or working on TeleDelta equipment should be suitable qualified

and follow recommended best practice safety procedures surrounding Electrical / IT and Broadcast

systems.

Under no circumstances should persons remove the cover of any TeleDelta products without written

permission from TeleDelta –doing so will void any warranties.

General Precautions

•Operate the HD100 in a dry, dust free environment

•Unless qualified, do not open the cover of the HD100, doing so may void all warranty

purposes.

•Exercise caution when operating any electrical device, do not operate any device unless

you are qualified to do so.

•Do not stick your fingers into a light bulb socket.

Important note

All figures and numbers displayed in the screengrabs in this example document may have been

altered for testing purposes.

It is highly recommended that you define your own settings based on your situational needs.

Introduction

This document outlines some of the precaution’s users must maintain when installing, servicing and

operating the TeleDelta HD100 Series and is designed to assist installers, re-sellers and operators

with the installation, setup and long-term support for the HD100 series encoders.

It is also designed to serve as a quick start guide when setting your encoder.

This document is not specific to any particular operation and is designed to be a quick ‘turn key’ style

release.

It is highly advised that you seek out professional advice from a TeleDelta representative or a

qualified reseller partner.

For additional technical information please email: engineering@teledelta.com

A reasonable understanding of IP / IPTV, Broadcast and IT Parameters Infrastructure is required to

operate and maintain this hardware.

www.teledelta.com

Page 3

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Installation

1. Connect your peripheral cables (HDMI/SDI and MIC) to the correct ports on the back of the

unit. Insert the SD card or USB disk if you are going to be using either of these media for

recording or playback.

2. Connect an Ethernet cable from a management network to the unit RJ45 port. During the

initial set up of your device it is advised you do this to a local terminal before introducing it to

your network.

3. Connect the power adapter, the unit will automatically boot itself once power is applied.

Note: It is important to maintain appropriate ventilation when installing. When installing the

HD100 into a rack environment please allow 1/3 RU above and below your installation for

appropriate ventilation. Inappropriate ventilation may cause heat dissipation issues which in

turn can damage your unit.

Logging In

The HD100 can be managed through its web-based GUI.

1. Open a web browser (Internet Explorer, Firefox or Chrome; Edge is not recommended) and

navigate to the HD100 IP address:

IP Address of HD100 is 192.168.1.100

Username: admin Password: admin

Status Page:

Once logged in –you’ll be presented with the below landing page which has key monitoring and

system information on the HD100s status, this is the status page

www.teledelta.com

Page 4

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Navigating the HD100 Menu

Clicking on the HD100 Logo (Top left-side) produces a drop-down menu (below) for navigation

around the unit, from here users can setup and manage the HD100 parameters

Live Service / Streaming Settings

From the menu –select Live Service / Streaming Settings –from this menu users can setup the input

(HDMI / SDI) encoding parameters and select either default or advanced system setups.

www.teledelta.com

Page 5

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

The landing page may be similar to the below –allowing a “Basic Settings”streaming to specific

output locations (i.e., YouTube) –users can configure the setup as required –detailed below

Comment on YouTube / Facebook and 3rd Party Streaming

Standards and requirements for streaming to 3rd party platforms including YouTube, Facebook and

similar commonly change –the below is a guide only and users should seek advice from the

streaming service provider to confirm their setup is compatible with the streaming provider

Authorize your Device (YouTube / Facebook)

Once a basic configuration is setup, users can authorise their stream with the 3rd party streaming

service by clicking “Authorize Your Device”–this code information will be required by the streaming

service.

www.teledelta.com

Page 6

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Follow the steps to authorise your stream –please consult the streaming service provider (YouTube

/ Facebook) for more standards information if required.

Manual Encoder Setup (UDP, RTMP, RTMPS, HLS, RTSP)

Users can manually setup the encoder to meet their requirements –the below is an example of UDP

Multicast setup. The HD100 will also support a range of 3rd party streaming standards for internet

delivery including RTMP, RTMPS, HLS, RTSP –please consult your 3rd party streaming service

provider for their exact setup requirements to enter into the HD100 encoder.

Basic Settings

Provides a quick-setup configuration page to start streaming

Input: Select the Input Source HDMI or SDI (inputs are model dependent)

Output: Streaming Output Format selection (this example is for UDP Multicast)

IP: Streaming IP output port (this is the UDP multicast output address, for example an

224.2.2.2 format of equivalent multicast standard address format is required)

www.teledelta.com

Page 7

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Port No: Specify the UDP multicast output port address

Video Profile: Pre-defined output video profiles or select “User-Defined”from the drop-

down to create a separate streaming profile from the Advanced Settings Page (below)

Advanced Setting

Users can alter basic setup parameters as required –A general understanding of encoder setups,

bitrates and streaming is recommended prior to making adjustments to the below.

Once users have defined either basic setup or advanced setup parameters, users should select

“Apply”to have changes take effect. “Start Streaming”will start the encoders stream out content.

www.teledelta.com

Page 8

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Record / FTP Upload Settings

Users are able to record and upload recordings to USB / SD cards or FTP sites via the HD100

encoders (not a USB / SD card is required for FTP recordings)

Note: It is highly recommended that a high-quality USB / SD Card is used with a minimum write

speed of 30MB/s and 32GB of storage.

From the HD100 Menu –select Record / FTP Upload Settings –you will be presented with the below

page:

Before staring a recording –ensure the USB / SD Card is inserted into the HD100 and recognised by

the unit.

www.teledelta.com

Page 9

Dropbox\TeleDelta\HD Products\HD100 Network Encoder\HD100 Quick Start Guide rev2.1

Recording to USB / SD Card

Enter the desired setup parameters as below –Ensure the Recording has completely stopped prior

to removing the USB or SD card from the HD100.

Storage Device: Select either USB or SD Card for recordings

Record File Format: Select either .TS (Transport Stream) or encoded .MP4 or .MOV

Record Name: Select a file Name

Record Mode: Select either:

Looping –which will continuously loop recordings

Size –Select the desired size of recording

Time –Select the desired time (length) of recording

FTP Upload

Consult with your FTP provider for the correct FTP string paths and required credentials for logging

in to the FTP server –enter these details into the FTP settings as below:

Tabla de contenidos

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario