
Products Covered By This Installation Guide
The TeleAdapt PowerHub Mini (TA-7541US) is a furniture power
distribution unit which provides a tamper-resistant US NEMA
receptacle and 2 USB charging sockets (1 x USB Type-CTM that can
charge up to 5V/3A and 1 x USB Type A that can charge up to 5V/
2.4A).
The use of a tamper-resistant receptacle gives industry leading
protection against the accidental insertion of foreign objects into the
power sockets and provides enhanced safety for all users.
The TA-7541US is provided with 2 trims (Slimline black and Slimline
metallic) and a duplex power plug so the number of available
outlets in a room is not reduced when it is tted.
Installation is simple as the TA-7541US only requires a single
connection to a US 120V/60Hz outlet, so tting can be undertaken
by anybody who has a screwdriver and does not require a qualied
electrician.
PowerHub Mini Part Numbers
TA-7541US-USN2 Black PowerHub Mini, 2 metre rear power
cable.
TA-7541US-USN3 Black PowerHub Mini, 3.5 metre rear power
cable.
TA-7541US-WN2 White PowerHub Mini, 2 metre rear power
cable.
TA-7541US-WN3 White PowerHub Mini, 3.5 metre rear power
cable.
It is also possible to supply the PowerHub Mini with a straight,
simplex NEMA plug (instead of the right angled duplex NEMA plug)
if rear cabling needs to be pulled through a conduit. Please contact
TeleAdapt for additional information and availability.
2Important Safety Instructions
• Read these instructions carefully before attempting any
installation. Follow all instructions and heed all warnings.
These instructions should be kept for future reference.
• This equipment must be securely attached to furniture in strict
accordance with these installation instructions.
• This equipment is designed for indoor use only.
• Only use with attachments and accessories as specied by
the manufacturer.
• The mains plug used to disconnect this equipment from its
power source must be readily accessible at all times.
• Ensure the power cord is uncoiled before installation.
• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles and the point
where they exit from the equipment.
• The power cord must be plugged into a mains socket outlet
with protective earthing.
• Clean only with a dry cloth.
• Refer all servicing to qualied service personnel. Servicing is
required when the equipment has been damaged in any way,
for example if the power supply plug or cord is damaged,
liquid has been spilled or objects have fallen into the
equipment, the equipment has been exposed to rain or
moisture, does not operate normally or has been dropped or
damaged.
• Unplug this equipment during lightning storms or when
unused for long periods of time.
• Do NOT defeat the safety purpose of the grounded plug. If
the provided plug does not t into your outlet consult a
qualied electrician to replace the obsolete outlet.
• Do NOT install or use this equipment near water.
• Do NOT expose this apparatus to rain or moisture.
• Do NOT expose to dripping or splashing. No objects lled
with liquid such as vases shall be placed on the equipment.
• Do NOT install near any heat sources such as radiators,
convection heaters or other apparatus such as ampliers that
produce heat.
• Do NOT exceed the maximum load of 10 amps.
Approval Information
The TA-7541US is ETL listed for the USA and Canada and
conforms to UL962a and UL1310. The internal PSU also conforms
to FCC Part 15b.
PowerHub Mini Installation Guide
3
PowerHub Mini Installation Guide