Tekvox TEK 380-HD HDMI/SDI Manual de usuario

TEK 380-HD HDMI/SDI

Conference Camera

User’s Guide

TEK 380-HD Conference Camera

TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216

V031513

Table of Contents

Overview......................................................................................................................... 4

Main Features.................................................................................................................4

Camera and Lens......................................................................................................5

Pan/Tilt Movement ....................................................................................................5

Rear Connectors.......................................................................................................6

RS-232 Pin Out...................................................................................................6

OSD Menu ......................................................................................................................8

Self-testing OSD Menu..............................................................................................8

Dome OSD................................................................................................................8

LENS OSD................................................................................................................9

IR Remote Controller..................................................................................................... 10

Camera Switch Settings.................................................................................................11

SW1 Address Setting Table..................................................................................... 11

SW2 Communication Protocol Settings................................................................... 11

IR Address Select....................................................................................................12

Installation..................................................................................................................... 12

Size............................................................................................................................... 12

Specifications................................................................................................................ 13

VISCA PROTOCOL....................................................................................................... 15

Command Set .........................................................................................................15

Inquiry Command List .............................................................................................17

TEK 380-HD Conference Camera

TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216

Overview

The TEK 380-HD conference camera is a high definition PTZ camera with 10X optical zoom lens and has

both HDMI and SDI outputs. With its small size, 16:9 aspect ratio, 2.1 Mega pixel CCD and 64 presets this

camera makes an excellent camera for videoconferencing rooms and lecture capture systems. The

camera can be setup for multiple resolutions and be ceiling mounted. Having a smaller size than most

similar quality cameras allows for smaller mounting brackets and cubby holes. This also makes the

camera not as visually intrusive as larger cameras. The camera can be controlled using the Sony®

VISCA™ or the PELCO P/D Command set. This makes the camera directly replaceable with other like

cameras.

Main Features

One of the most important features of this camera is it can support 64 presets (PELCO) 63 (VISCA) within

the camera. This makes the camera much easier to control as compared to other cameras that are only 6

to 15 presets. Other features include up to1080i@60 resolution with both HDMI and SDI outputs.

Camera and Lens

Video CMOS Sensor: 1/2.5 inch super quality HD CMOS transducer

Image: 16:9 2.1 Mega pixel

Resolution: HD 1080i@60; 1080p30; 720p/30; 720p/60

Lens zoom: 10x optical zoom, f=4.5-45mm F1.8-2.2

Focus, 1.0Lux at F 1.8

Wide angle lens: 0.7x wide angle lens, caliber 30mm

Visual Angle: 5.4°(farness) -70°(nearness)

Minimum Illumination: 10LUX

White Balance: Auto/Sunlight/Cloudiness/Shade/fluorescence white balance mode

Focus: Auto/Manual

Iris: Auto/Manual Electronic

Shutter: Auto Black light compensation: Auto

S/N Ratio: 50dB3.

Auto sensing position for ceiling installations

Pan/Tilt Movement

Pan Rotation: ±177.5 degree

Tilt Rotation: ±45 degree

Pan speed: 0.5°- 200°/sec

Tilt speed: 0.5°-150°/sec

Preset Speed: Pan running: 120°/sec

Tilt running: 100°/sec

Preset: 64 preset position

TEK 380-HD Conference Camera

TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216

Rear Connectors

HD-SDI

HDMI

IR Receiver

RS-232 In and Out

RS-485 (Input Connector)

12V DC

RS-232 Pin Out

Camera is shipped with a VISCA to DB-9 Female and an RS-485 adapter cable. When connecting the

camera to a control system, use the supplied RS-232 cable and connect to the RS-232 Input

connector. Only the TX, RX and GND need to be connected,

Input Connector –Connect to Control System using a straight through DB-9 and supplied

RS-232 Cable.

Function

DTR IN

DSR IN

TXD IN

GND

RXD IN

GND

NO Connection

RS-232C OUT Connector

Function

DTR OUT

DSR OUT

TXD OUT

GND

RXD OUT

GND

NO Connection

Camera Union

TEK 380-HD Conference Camera

TEKVOX, Inc. –210.348.6565 –www.TEKVOX.com San Antonio, TX 78216

OSD Menu

Access OSD menu to view the features of camera and change the settings. Note: Camera cannot move

pan/tilt when OSD menu is displaying.

Self-testing OSD Menu

When the camera is powered on, the camera performs a self-test and displays an OSD menu as following.

ADDRESS（Camera address）

BUADRATE（Camera baud rate）

PROTOCOL（PTZ Control Protocol）

CONTROL（Camera control type）

LENSTYPE（Camera module adopted）

DOMETYPE（Camera model No.）

VENDER（Manufacturer name）

VERSION （Factory version N

Dome OSD

Press “DOME OSD” button on remote controller to display and make changes to the camera’s Pan and Tilt

functions and its operation. When changes are made to these settings, their values are stored in the

camera’s nonvolatile memory.

These setting include:

PAN SPEED Default value: 30

oAdjustable pan movement speed scope 1~63

TILT SPEED Default value: 30

oAdjustable tile movement speed scope 1~63

SCAN SPEED Default value: 6

oAdjustable pan movement speed scope 1~63

TOUR PATH Default value: 1

oOptional tour path at 1~4

TOUR DWELL(Tour duration time) Default value: 5

oTour duration is 1~60 seconds

PROPORTION (Speed matching) Default value: ON

oON enable speed match function

AUTO REV Default value: P

o(P) Image auto flip (positive) / (N) upside down/OFF

FRAME FORMAT Default value: 1080i/60

oOther Settings - 1080p/30, 1080p/25, 1080p/24, 1080i/60, 1080i/50, 720p/60, 720p/50

OUTPUT TYPE Default value: DVI

oOther settings - HDMI / DVI

ASPECT RATIO (display mode) Default value: 16:9

oOther settings - 16:9/4:3

LENS OSD

Press “LENS OSD” button on remote controller to display and make changes to the camera’s Lens and its

image quality. When changes are made to these settings, their values are stored in the camera’s

nonvolatile memory.

ISS (Image Stable Mode) Default value: NO

oSUPPORT/NO Support option

ISE (Image Stable Mode) Default value: OFF

oISE: ON/OFF

BLC (Back light comp) Default value: OFF

oBLC: ON/OFF

SELECT SCENE Default value: INACTIVE

oSelect scene: ACTIVE/INACTIVE

SELECT SCENE Default value: NIGHT

oUnder Active situation: AUTO/WDR/HIGH/NIGHT option

METERING LIGHT MODE Default value: WDR

oOptional Mode: CENTER/SPOT/WDR

EXPOSE MODE Default value: PAE

oMode option: MANUAL/PAE/AAE/SAE

APERTURE MODE Default value:F1.8

oAperture range: F1.8—F11

SHUTTER SPEED Default value:1/5

oShutter speed range: 1/5—1/4000

EV CORRECTION Default value:+0

oOption value: -2/-1.66/-1.33/-1/-0.66/-0.33/0/ +0.33/+0.66/+1/ +1.33/+1.66/+2

ISO SENSITIVITY Default value: AUTO

oOption value:AUTO / MANUAL

MANUAL SETUP Default value:IS080

oUnder manual ISO sensitivity, the parameter could be set to:

ISO80/ISO100/ISO200/ISO400/ISO800 /ISO1000

FLICKER REDUCTION Default value: ON

oOption: ON / OFF

WHITE BALANCE Default value:AUTO

oOption value: AUTO/CUSTOM/MANUAL/DAYLIGHT

/CLOUDY/SHADE/FLW/FLN/FLD/TUNGSTEN

DIGITAL EFFECT Default value: NORMAL

oValue option: NORMAL/SEPIA/MONOCHROM/ POSTERIZE/SOLARIZE/NEGA

SHARPNESS REDUCTION Default value: MIDDLE

oSetting option: HIGH/MIDDLE/LOW

NOISE REDUCTION Default value: MIDDLE

oSetting option: HIGH/MIDDLE/LOW/OFF

CHROMA KEY CR Default value: LOW

oSetting option: HIGH/MIDDLE/LOW

CHROMA KEY CB Default value: LOW

oSetting option: HIGH/MIDDLE/LOW

AUTO SLOW SHUTRER Default value: OFF

oIn the situation of the light is dark to increase lighting volume.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario