Tektronix TBS1022 Instrucciones de instalación y mantenimiento
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B,
TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope
Declassification and Security Instructions
*P077077101*
077-0771-01
TBS1000, TBS1000B/TBS1000B-EDU, TDS1000B/TDS2000B,
TDS1000C-EDU/TDS2000C, and TPS2000B Series
Digital Storage Oscilloscope
Declassification and Security Instructions
www.tektronix.com
077-0771-01
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products
are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all
previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
■In North America, call 1-800-833-9200.
■Worldwide, visit www.tektronix.com to find contacts in your area.
Table of Contents
Preface ................................................................................................................................................ iii
Memory devices
Volatile memory devices ................................................................................................................ 1
Volatile memory devices (TBS1000B & TBS1000B-EDU) .......................................................... 3
Nonvolatile memory devices .......................................................................................................... 4
Nonvolatile memory devices container (TBS1000B & TBS1000B-EDU) .................................... 5
Data export devices ........................................................................................................................ 6
Clear and sanitize procedures
Clear the flash memory ................................................................................................................... 7
Clear or sanitize a non-functional instrument
Acquisition board ........................................................................................................................... 9
Compact flash card (TPS oscilloscopes only) ................................................................................ 9
USB flash drive (TBS and TDS oscilloscopes only) ...................................................................... 9
Charges ........................................................................................................................................... 9
Declassification and Security Instructions i
Table of Contents
ii Declassification and Security Instructions
Preface
This document helps customers with data security concerns to sanitize or remove
memory devices from the listed products. These products have data storage
(memory) devices and data output devices (USB ports). These instructions tell
you how to clear or sanitize the memory devices, and also tell you how to
declassify an instrument that is not functioning.
Instrument code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flash memory
or on USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.
Reference
The procedures in this document are written to meet the requirements specified
in:
■NISPOM, DoD 5220.22–M, Chapter 8
■ISFO Process Manual for Certification & Accreditation of Classified Systems
under NISPOM
Products
The following Tektronix products are covered by this document:
■TBS1000 Series. TBS1022, TBS1042, TBS1062, TBS1102, TBS1152
■TBS1000B Series. TBS1052B, TBS1072B, TBS1102B, TBS1152B,
TBS1202B
■TBS1000B-EDU Series. TBS1052B-EDU, TBS1072B-EDU, TBS1102B-
EDU, TBS1152B-EDU, TBS1202B-EDU
■TDS1000B Series. TDS1001B, TDS1002B, TDS1012B
■TDS2000B Series. TDS2002B, TDS2004B, TDS2012B, TDS2014B,
TDS2022B,TDS2024B
■TDS1000C-EDU Series. TDS1001C-EDU, TDS1002C-EDU, TDS1012C-
EDU
■TDS2000C-EDU Series. TDS2001C, TDS2002C, TDS2004C, TDS2012C,
TDS2014C, TDS2022C, TDS2024C
■TPS2000B Series. TPS2012B, TPS2014B, TPS2024B
Declassification and Security Instructions iii
Required documents
To perform the procedures in this document, you will need to have access to the
manuals listed below. These manuals are available on the Tektronix Web site at
www.tektronix.com/downloads.
■TBS1000 Series Digital Storage Oscilloscope Service Manual (Tektronix
part number, 077-0772-xx)
■TBS1000B Series Digital Storage Oscilloscope Service Manual (Tektronix
part number, 077-0897-xx)
■TDS1000B and TDS2000B Series Digital Storage Oscilloscope Service
Manual (Tektronix part number, 077-1828-xx)
■TDS2000C and TDS1000C-EDU Series Digital Storage Oscilloscope Service
Manual (Tektronix part number, 077-0446-xx)
■TPS2000B Series Digital Storage Oscilloscope Service Manual (Tektronix
part number, 077-0447-xx)
Preface
iv Declassification and Security Instructions
Terms used in this document
The following terms may be used in this document:
■Clear. This removes data on media/memory before reusing it in a secured
area. All reusable memory is cleared to deny access to previously stored
information by standard means of access.
■Erase. This is equivalent to clear.
■Instrument Declassification. A term that refers to procedures that must be
undertaken before an instrument can be removed from a secure environment.
Declassification procedures include memory sanitization and memory
removal, and sometimes both.
■Media storage/data export device. Any of several devices that can be used
to store or export data from the instrument, such as a USB port.
■Nonvolatile memory. Data is retained when the instrument is powered off.
■Power off. Some instruments have a “Standby” mode, in which power is still
supplied to the instrument. For the purpose of clearing data, putting the
instrument in Standby mode does not qualify as powering off. For these
products, you will need to either press a rear-panel OFF switch or remove the
power source from the instrument.
■Remove. This is a physical means to clear the data by removing the memory
device from the instrument. Instructions are available in the product Service
Manual.
■Sanitize. This eradicates the data from media/memory so that the data cannot
be recovered by other means or technology. This is typically used when the
device will be moved (temporarily or permanently) from a secured area to a
non-secured area.
■Scrub. This is equivalent to sanitize.
■User Accessible. User is able to directly retrieve the memory device
contents.
■User-modifiable. User can write to the memory device during normal
instrument operation, using the instrument interface or remote control.
■Volatile memory. Data is lost when the instrument is powered off.
Preface
Declassification and Security Instructions v
Device terms
The following terms are used with the memory devices in this document:
■User data. Describes the type of information stored in the device. Refers to
waveforms or other measurement data representing signals connected to the
instrument by users.
■User settings. Describes the type of information stored in the device. Refers
to instrument settings that can be changed by the user.
■Both. Describes the type of information stored in the device. It means that
both user data and user settings are stored in the device.
■None. Describes the type of information stored in the device. It means that
neither user data nor user settings are stored in the device.
■Directly. Describes how data is modified. It means that the user can modify
the data.
■Indirectly. Describes how data is modified. It means that the instrument
system resources modify the data and that the user cannot modify the data.
Preface
vi Declassification and Security Instructions
Otros manuales para TBS1022
1
Este manual sirve para los siguientes modelos
36
Tabla de contenidos
Otros manuales de Equipo de prueba de Tektronix
Tektronix
Tektronix 420 Manual de usuario
Tektronix
Tektronix 2235 Manual de usuario
Tektronix
Tektronix 2336YA Manual de usuario
Tektronix
Tektronix AMM768 Manual de usuario
Tektronix
Tektronix 2440 Manual de usuario
Tektronix
Tektronix 7B53A Manual de usuario
Tektronix
Tektronix 503 Manual de usuario
Tektronix
Tektronix DPO7000 Series Manual
Tektronix
Tektronix 442 Manual de usuario
Tektronix
Tektronix TriMode P7504 Manual
Tektronix
Tektronix DS1001G Manual de usuario
Tektronix
Tektronix 2465 Manual de usuario
Tektronix
Tektronix KEITHLEY 8010 Manual de usuario
Tektronix
Tektronix 516 series Manual de usuario
Tektronix
Tektronix T921 Manual de usuario
Tektronix
Tektronix 545 Manual
Tektronix
Tektronix 485 Manual de usuario
Tektronix
Tektronix 2236 Manual de usuario
Tektronix
Tektronix TDS5000B Series Manual de usuario
Tektronix
Tektronix S-4 Manual de usuario
Manuales populares de Equipo de prueba de otras marcas
SMART
SMART KANAAD SBT XTREME 3G Series Manual de usuario
Agilent Technologies
Agilent Technologies BERT Serial Manual de usuario
Agilent Technologies
Agilent Technologies N3280A Manual de usuario
Vernier
Vernier Go Direct Voltage Manual de usuario
Lifeloc
Lifeloc R.A.D.A.R. Manual de usuario
Fluke
Fluke T5-600 Instrucciones de funcionamiento e instalación
