Tektronix WFM2200A Manual de usuario

WFM2300 and WFM2200A

Multiformat, Multistandard Portable Waveform Monitors

Declassiﬁcation and Security

ZZZ

Instructions

www.tektronix.com

*P077086900*

077-0869-00

or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication

supersedes that in all previously published material. Speciﬁcations and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to ﬁnd contacts in your area.

Table of Contents

General safety summary .......................................................................................... iii

Service safety summary............................................................................................ v

Preface.............................................................................................................. vi

Clear and sanitize procedures .................... ........................ .............. .......... .............. ... 1

Memory devices ............................................................................................... 1

Data export devices............................................................................................ 5

Troubleshooting..................................................................................................... 7

How to clear or sanitize a nonfunctional instrument............ .......................... ................. 7

WFM2300 and WFM2200A Declassiﬁcation and Security Instructions i

Table of Contents

ii WFM2300 and WFM2200A Declassiﬁcation and Security Instructions

General safety summary

Review the following safety precautions to avoid injury and prevent damage to

this product or any products connected to it.

To avoid potential hazards, use this product only as speciﬁed.

Only qualiﬁed personnel should perform service procedures.

To avoid ﬁre or personal

injury

Use proper power cord. Use only the power cord speciﬁed for this product and

certiﬁed for the country of use.

Observe all terminal ratings. To avoid ﬁre or shock hazard, observe all ratings

and markings on the product. Consult the product manual for further ratings

information before making connections to the product.

Do not apply a potential to any terminal, including the common terminal, that

exceeds the maximum rating of that terminal.

Power disconnect. Remove the power cord of the external AC adapter to

disconnect mains power from the product. Also remove any installed battery pack

to completely disconnect power from the product.

Do not operate without covers. Do not operate this product with covers or panels

removed. The battery compartment cover can be removed during instrument

operation to install or replace the battery pack.

Do not operate with suspected failures. If you suspect that there is damage to this

product, have it inspected by qualiﬁed service personnel.

Avoid exposed circuitry. Do not touch exposed connections and components

when power is present.

Replace battery pack properly. Replace the battery pack only with the speciﬁed

type and rating.

Recharge battery pack properly. Recharge the battery pack only for the

recommended charge cycle at the recommended temperature.

Use proper battery charger. Use only the WFM2200A or WFM2300 waveform

monitor or the WFM200BC external battery charger to charge the WFM200BA

battery pack.

Use proper AC adapter. Use only the AC adapter speciﬁed for this product.

Remove battery pack before transporting or storing the instrument. Remove the

battery pack when transporting or storing the instrument in an enclosed container

such as the WFM200FSC Soft Carrying Case.

WFM2300 and WFM2200A Declassiﬁcation and Security Instructions iii

General safety summary

Do not operate in wet/damp conditions.

Do not operate in an explosive atmosphere.

Keep product surfaces clean and dry.

Provide proper ventilation. See the manual's installation instructions for details

on installing the product so it has proper ventilation.

Termsinthismanual These terms may appear in this manual:

WARNING. Warning statements identify conditions or practices that could result

in injury or loss of life.

CAUTION.Caution statements identify conditions or practices that could result in

damage to this product or other property.

Symbols and terms on the

product

These terms may appear on the product:

DANGER indicates an injury hazard immediately accessible as you read

the marking.

WARNING indicates an injury hazard not immediately accessible as you

read the marking.

CAUTION indicates a hazard to property including the product.

The following symbol(s) may appear on the product:

iv WFM2300 and WFM2200A Declassiﬁcation and Security Instructions

Service safety summary

Only qualiﬁed personnel should perform service procedures. Read this Service

Safety Summary and the General Safety Summary before performing any service

procedures.

Do not service alone. Do not perform internal service or adjustments of this

product unless another person capable of rendering ﬁrst aid and resuscitation is

present.

Disconnect power. To avoid electric shock, switch off the instrument power, then

disconnect the power cord from the mains power.

Use care when servicing with power on. Dangerous voltages or currents may exist

in this product. Disconnect power, remove battery (if applicable), and disconnect

test leads before removing protective panels, soldering, or replacing components.

To avoid electric shock, do not touch exposed connections.

WFM2300 and WFM2200A Declassiﬁcation and Security Instructions v

Preface

This document helps customers with data security concerns to sanitize or

remove memory devices from the WFM2200A and WFM2300 Multiformat,

Multistandard Waveform Monitors.

These products have data storage (memory) devices and data output devices (USB

ports). These instructions tell how to clear or sanitize the memory devices and

disable the data output devices. The instructions also tell how to declassify an

instrument that is not functioning.

Reference The procedures in this document are written to meet the requirements speciﬁed in:

NISPOM, DoD 5220.22–M, Chapter 8

ISFO Process Manual for Certiﬁcation & Accreditation of Classiﬁed Systems

under NISPOM

Products The following Tektronix products are covered by this document:

WFM2200A (Options 3G and DATA)

WFM2300 (Options 3G and DATA)

Related documents The following table lists the documentation that is available for the products and

shows where you can ﬁnd it: in a printed manual or on the Tektronix Web site.

Table i: Product documentation

Item Purpose Location

Installation and Safety Instructions Provides safety and compliance information with

hardware installation instructions and associated

safety warnings. This manual is available in English,

Japanese, and Simpliﬁed Chinese.

Printed manual and also available

at www.tektronix.com/manuals

User Manual Provides operation and application information. This

manual is available in English.

Available at

www.tektronix.com/manuals

Online Help In-depth instrument operation and UI help. On the instrument

Speciﬁcations and Performance

Veriﬁcation Technical Reference

Speciﬁcations and procedures for checking instrument

performance.

Available at

www.tektronix.com/manuals

Declassiﬁcation and Security

Instructions (this manual)

Provides information for sanitizing the product. Available at

www.tektronix.com/manuals

Release Notes Provides information about the key features and known

limitations of a speciﬁc software version release.

Available at

www.tektronix.com/manuals

vi WFM2300 and WFM2200A Declassiﬁcation and Security Instructions

Preface

Table i: Product documentation (cont.)

Item Purpose Location

WFM200BA Rechargeable Battery

Pack Instructions

Provides safety, operating, and recycling information

for the Lithium-Ion battery pack.

Printed manual and also available

at www.tektronix.com/manuals

WFM200BC External Battery

Charger Instructions

Provides safety and operating information for the

optional, external battery charger.

Printed manual and also available

at www.tektronix.com/manuals

WFM2300 and WFM2200A Declassiﬁcation and Security Instructions vii

Preface

Terms The following termsmaybeusedinthisdocument:

Clear. This removes data on media/memory before reusing it in a secured

area. All reusable memory is cleared to deny access to previously stored

information by standard means of access.

Erase. This is equivalent to clear.

Media storage/data export device. Any of several devices that can be used

to store or export data from the instrument, such as a USB port.

Nonvolatile memory. Data is retained when the instrument is powered off.

Power off. This instrument has a “Standby” mode, in which power is

still supplied to the instrument. For the purpose of clearing data, putting

the instrument in Standby mode does not qualify as powering off. For

this product, you will need to press and hold the Standby button for 5-10

seconds or remove the power source (AC adapter and battery pack) from the

instrument.

Remove. Thisisaphysicalmeanstoclearthedatabyremovingthememory

device from the instrument.

Sanitize. This eradicates the data from media/memory so that the data cannot

be recovered by other means or technology. This is typically used when the

device will be moved (temporarily or permanently) from a secured area to a

non-secured area.

Scrub. This is equivalent to sanitize.

User-modiﬁable. The user can write to the memory device during normal

instrument operation, using the instrument interface or remote control.

Volatile memory. Data is lost when the instrument is powered off.

viii WFM2300 and WFM2200A Declassiﬁcation and Security Instructions

Otros manuales para WFM2200A

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Tektronix

Tektronix

Tektronix WFM2200 Manual de instalación y funcionamiento

Tektronix

Tektronix 613 Manual de usuario

Tektronix

Tektronix QAM400A Manual de uso y cuidado

Tektronix

Tektronix WFM6100 Opt. MB Manual de usuario

Tektronix

Tektronix WFM5200 series Cómo utilizar

Tektronix

Tektronix WFM 601i Manual de usuario

Tektronix

Tektronix WFM5250 Manual de usuario

Tektronix

Tektronix WFM5200 series Manual de usuario

Tektronix

Tektronix WFM2200A Manual de usuario

Tektronix

Tektronix 4112 Manual de usuario

Tektronix

Tektronix WFM720UP Manual de usuario

Tektronix

Tektronix MTM400A Manual de uso y cuidado

Tektronix

Tektronix Sentry Series Manual

Tektronix

Tektronix WFM6120 Instrucciones de instalación y mantenimiento

Tektronix

Tektronix 013-0278-XX Manual de usuario

Tektronix

Tektronix 1705A Manual de usuario

Tektronix

Tektronix K1297-G20 Manual de usuario

Tektronix

Tektronix WFM6100 Opt. MB Manual

Tektronix

Tektronix WFM2200A Manual de uso y cuidado

Tektronix

Tektronix WFM8300 Guía del usuario

Tektronix

Tektronix 1740A/1750A Manual de usuario

Tektronix

Tektronix WFM601 Manual de usuario

Tektronix

Tektronix WFM2200 Manual de uso y cuidado

Tektronix

Tektronix WFM6120 Cómo utilizar

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación