Section:
Description: Page No:
Date:
PREPARATION FOR ATTACH MODESTY TO LEG ATTACH INFILL BOTTOM BRACKET TO MODESTY
INT_009
8 of 12
Aug 2017
COMPLETE FRAME AND WIRE GAP WORKSURFACE - SINGLE SIDED
FRAMES, SUPPORTS AND WORKSURFACES
interpret
Installation Guides
STEP 12: Fasten Infill Bottom Brackets to the Modesty. Use pilot holes for location.STEP 11: Align Drilling Template with the bottom of Modesty and push it against the Leg.
Mark the location to be drill as shown. Push Modesty out of the way and drill the marked
location.
NOTE: Please mark another pilot hole if End Gable is specified.
Underside VIew
K
I
ALIGN
NOTE: Make sure to position
Drilling Template as shown.
Please mark another pilot hole if
End Gable is specified.
Modesty End Gable
(Optional)
R
