Do not transmit for more than 50% of total radio use
time(50% duty cycle). Transmitting more than 50%
of the time can cause FCC RF exposure compliance
requirements to be exceeded.
Always use TEKMAX supplied accessories
(antennas, batteries, belt clips, speaker/MIC, etc.).
Use of unauthorized accessories can cause the FCC
RF exposure compliance requirements to be
exceeded.
Always keep the radio at least 15cm away from the
face when transmitting and only use the belt-clip
when attaching the radio to your belt, etc., to ensure
FCC RF exposure compliance requirement are not
exceeded.
This radio complies with FCC RF exposure limits for
occupational use only.
3) CE Regulations
Hereby, TEKMAX TELECOM, declares that this equipment
complies with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
This equipment is marked with the symbol
and can be used throughout the European community.
This indicates compliance with the R&TTE Directive
1999/5/EC and meets the relevant parts of following
technical specifications:
This equipment can be used for both Indoor and outdoor
voice communication purpose. And the maximum power 5W
for the 136-174MHz frequency band ranges.
Each channel frequencies is to be PC Programmable and
the channel frequencies are allocated by individual
government authorities independently.
Caution : Exposure to Radio Frequency Radiation
To comply with RF exposure compliance requirements, for
mobile configurations, a separation distance of at least 25
cm must be maintained between the antenna of this device
and all persons.
EN300 086 v1.1.1(Radio Spectrum)
EN301 489-5 v1.3.1(EMC)
EN60950-1 & EN50360(SAFETY)
