Open the Bluetooth sengs of the phone, swipe right on the main interface of the watch, click
the "phone call" icon that appears below, and click "Open" to see the name of the audio/call
Bluetooth. Find the Bluetooth name in the Bluetooth list of the phone and pair; aer the
audio/call Bluetooth connected, the Bluetooth icon of the watch is displayed as the outer
periphery ) lights up in blue; Tip: Based on this connecon, make sure to tap on various APP
nocaon synchronizaon permissions in WearPro sengs, to realize synchronously viewing
of various message from mobile phone on the watch side; to realize all connecon funcons(like
making a phone call through watch), make sure that both App side and audio Bluetooth are
connected to the phone.
4. Unbind Bluetooth connecon from the APP side
4.1 Android system unbind Bluetooth from the APP
In the "Device" column of WearPro, pull down to the "Unbind" and click to unbind the App;
4.2 IOS system unbind APP Bluetooth
In the "Device" column of WearPro, scroll down to "Unbind" and click to unbind the App; then
go to the Bluetooth sengs of the phone, select the Bluetooth name of the smart watch, and
click "Ignore this device"
Aer canceling the Bluetooth connecon on the APP, the green connecon in the middle of the
Bluetooth icon of the watch is released, and the blue outside the circle is sll lit;
5. Unbind audio Bluetooth connecon
To disable the audio Bluetooth connecon, nd the name of the audio Bluetooth in the
Bluetooth sengs of the mobile phone, and click "Ignore this device" to unbind all Bluetooth
connecons with the watch. Aer all operaons are completed, the watch's Bluetooth icon will
return to gray, means no connecon .
6. Find the device
The watch is successfully bound to the app. Click to nd the watch on the mobile app, and the
watch will vibrate once when the screen is on.
7. Camera
Tap the camera to wake up the watch device's camera mode, tap the camera buon to take a
photo, and the picture will be automacally saved to the phone system album.
8. Data synchronizaon
The watch is successfully bound to the app, and the data from the watch can be synchronized to
the app.
9. Raise your hand to brighten the screen
Wear the watch correctly on your wrist (le/right hand). When you turn on the hand-up buon,
when you li your wrist to look at the watch, the watch will automacally brighten the screen.
10. Do not disturb mode
