Tekkeon MP3700 Manual de usuario
MP3700/MP3450-10 User Guide
USER GUIDE
Contents
Overview..............................................................................................................................2
Getting Started ....................................................................................................................2
Unpacking myPower ALL Plus........................................................................................2
Getting to Know myPower ALL Plus ..............................................................................3
Storing myPower ALL Plus ............................................................................................3
Charging myPower ALL Plus ..............................................................................................4
Charging with a Laptop Power Adapter ..........................................................................4
Charging with a Solar Panel............................................................................................5
Using myPower ALL Plus....................................................................................................7
Select/Connect the Adapter Tip ......................................................................................7
Connect the Power Output Cord ....................................................................................8
Connect the Portable Device ..........................................................................................8
Connect the 5V Device Using an Adapter........................................................................9
Connect the 5V Device Using the Device USB Cable ......................................................9
View myPower ALL Plus Battery Capacity ....................................................................10
Adapters ............................................................................................................................11
Accessories ......................................................................................................................13
Using the Extended Battery (MP3450-10) ........................................................................14
Adding the Extended Battery ........................................................................................14
Charging the Extended Battery......................................................................................14
Troubleshooting ................................................................................................................15
Limited Warranty ..............................................................................................................16
2
Overview
With myPower™ ALL Plus —the universal rechargeable battery featuring automatic voltage
detection, you can power your laptop or other portable devices that require from 9.5V to 20V, plus
power and charge just about any 5V portable device from the USB port. Simply connect myPower ALL
to your portable device to extend the battery life.
myPower ALL Plus automatically detects and sets the voltage for the connected device. And this
lightweight device can power your laptop and a second device at the same time. This rechargeable
lithium polymer battery can be used alone, or with the optional extended battery (MP3450-10) to
double the capacity. The extended battery with mounting brackets is sold separately.
Getting Started
Unpacking myPower ALL Plus
Your myPower ALL Plus package includes the following:
User guide (not shown)
Adapter tip kit with drawstring bag
(8 output adapter tips and 5 input adapter tips)
Power output cord
Retractable USB
cable
Mini USB tip
myPower ALL Plus
lithium polymer
rechargeable battery
3
USER GUIDE
Getting to Know myPower ALL Plus
Storing myPower ALL Plus
myPower ALL Plus can be used in the environmental temperature range between 32° to 104° F
(0° and 40°C). While not in use, store myPower ALL Plus in a dry area where the temperature is
between 50° and 86° F (10 and 30°C). With higher temperatures or in a moist environment, the
battery life will decrease. Extreme temperatures can damage the battery.
Power
DC OUT
For connection to device
(9.5V-20V auto select)
USB Port for connection
to 5V device
Battery Connection Port/
3-Pin Input Port
Battery Connection Port
Charging/Power Indicator
MP3700 MP3450-10
DC IN
For connection to
power adapter
Capacity Display Button
Capacity Display
Indicators
4
Charging myPower ALL Plus
myPower ALL Plus does not come with its own power adapter as it uses your laptop power adapter to
eliminate the need to carry multiple power adapters. To charge MP3700, you can use either your laptop
power adapter or a solar panel. The steps to charge with either of these devices are described in this
section.
myPower ALL Plus will charge in four hours when completely empty. The charging indicator will change
from red to green after the battery is 80% charged. Therefore, you should view the actual battery
capacity before disconnecting the power adapter to stop charging. (Before using myPower ALL Plus for
the first time, you must charge the device for four hours.)
Charging with a Laptop Power Adapter
If your laptop power adapter tip does not fit the MP3700 DC IN jack, you must use the input adapter tip
that is compatible with your laptop (provided in the package) to connect the power adapter to MP3700.
See Adapters on page 11 for detailed information about the adapter tips.
WARNING: If the power adapter is not the original supplied with the laptop, you must use a power
adapter with the same output voltage and output current as the original. This is very important as
MP3700 passes through the voltage to the laptop when both MP3700 and the laptop are being charged
using the power adapter.
NOTE: Before connecting the laptop power adapter to myPower ALL Plus, please confirm that the power
adapter does not provide more than 5A as myPower ALL Plus will shut down and may be damaged if
more than 5A is provided. The output voltage is shown on the power adapter label.
5
USER GUIDE
1. Slide the ON/OFF switch to OFF.
2. Connect the laptop power adapter to the DC IN jack on MP3700. If your power
adapter tip does not fit the DC IN jack, connect the input adapter tip that fits
your laptop power adapter to the plug on the laptop power adapter, and
plug the other end into the DC IN jack on the end of MP3700.
3. Plug the power adapter into a wall outlet. The red charging indicator will
turn on to indicate the battery is charging and is less than 80% charged.
4. When the charging indicator turns to green, press the Capacity Display button
to view the battery capacity. If the capacity does not indicate full (all green
LEDs on), continue to charge the battery until the battery capacity
indicates full.
NOTE: myPower ALL Plus will automatically shut down the power input when fully charged, so you can
charge it overnight.
Charging with a Solar Panel
You can charge myPower ALL Plus using a compatible solar panel. The solar panel can connect to the
DC IN port, or the 3-Pin Input Port, depending upon the type of solar panel. The DC IN port is designed
for use with a DC power adapter with constant current input. Charging myPower ALL Plus efficiently
requires a minimum of 1A current output from the solar panel. In general, a 25W or higher
solar panel should provide sufficient power to charge myPower ALL Plus.
The 3-Pin Input port is designed to allow charging by smaller solar panels (lower than 25W), and
requires an optional Smart 3-Pin Adapter available from Tekkeon. To use the solar panel with this port,
the solar panel must have a minimum open circuit voltage of 15V. However, there is no minimum output
current requirement from the solar panel.
6
To Charge through the DC IN Port
1. Connect the solar panel output cable into the DC IN port on myPower ALL Plus.
2. Verify that the red charging indicator turns on to indicate the battery is charging and is less than 80%
charged.
3. When the charging indicator turns to green, press the Capacity Display button to view the battery
capacity. If the capacity does not indicate full (all green LEDs on), continue to charge the battery until
the battery capacity indicates full.
4. When the battery capacity indicates full, unplug the connected charging cable.
To Charge through the 3-Pin Input Port
1. Connect the 3-Pin end of the optional Smart 3-Pin Adapter
into the 3-Pin Input port on the MP3700 (shown) and the
other end into the solar panel output port.
2. Verify that the charging indicator next to the input jack on the
Smart 3-Pin Adapter (shown) will turn on to indicate the
battery is charging.
3. After approximately four hours, press the Capacity Display button
to view the battery capacity. If the capacity does not indicate full
(all green LEDs on), continue to charge the battery until the
battery capacity indicates full.
4. When the battery capacity indicates full, unplug the
connected charging cable.
LED turns on when solar panel is
charging myPower ALL Plus
7
USER GUIDE
Using myPower ALL Plus
The main output port (DC OUT) on myPower ALL Plus can be used to power and/or charge any portable
device that requires between 9.5V and 20V (and some power devices that require slightly more voltage).
At the same time or separately, the USB output port can be used to power and charge smaller devices
requiring 5V.
To use myPower ALL Plus to power and/or charge your device, take these steps which are described in
detail in the following sections.
• Select an output adapter tip for your main device and connect the plug to the output cord.
• Connect the power output cord to myPower ALL Plus.
• Connect the power output cord/output adapter tip to your laptop. See Adapters on page 11
for detailed information about the adapter tips.
• Connect a second 5V device using an adapter, or with the device USB cable.
You also can charge your laptop and myPower ALL Plus at the same time by plugging the laptop power
adapter into myPower ALL Plus. In this case, the output current should be less than 5A to power and/or
charge your device.
Select/Connect the Adapter Tip
1. Locate the polarity symbol on your device in the area around the power
connector jack:
WARNING: myPower ALL Plus supports Center Positive polarity only. If your device has a Center
Negative polarity, do not power the device with myPower ALL Plus; contact
for assistance.
Center Negative
Center Positive
8
2. Select the output adapter tip that fits securely into the power jack on your portable device. See
Adapters on page 11 for detailed information about the adapter tips.
3. Connect the output adapter tip to the power output cord (but not the device).
Connect the Power Output Cord
1. Plug the large end of the power output cord into the DC OUT jack on the end of myPower ALL Plus.
Connect the Portable Device
1. Connect the output adapter tip into the power jack on the portable device.
2. If the internal battery is installed in the connected device, turn on the device.
3. Slide the power switch to ON. The MP3700 will automatically detect and set the required output
voltage.
4. If the portable device is not already turned on (step #2), turn on the portable device. While connected,
myPower ALL Plus will power (or power and charge in some cases) your device.
5. When finished, unplug the power output cord from your device and slide the power switch to OFF to
turn off the battery when not in use.
TIP: For most portable devices, myPower ALL Plus can be used to power the device even when the
device battery is not installed.
Otros manuales para MP3700
1
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Accesorios para portátiles de Tekkeon
