MixRite E-300 -User guide
Page 3of 13
Tefen Flow and Dosing Technologies LTD. Kibbutz Nahsholim 3081500 Israel
Introduction
TEFEN E300 fertilizer pump is designed to ensure precise amount of fertilizer to your irrigation
system.
E-300 electric dosing pump directly injects liquid additives into water lines.
The E300 operate by an AC/DC irrigation controller.
GENERAL SAFETY GUIDELINES
Carefully follow the installation instruction
Keep the pump protected from sun and water. Avoid water splashes.
All hazardous electric voltage jobs must be conducted by a local qualified electrician and
according to local regulations.
Do not leave the electrical compartment, hood, or any connection box open while the
machine is running or while you are away.
When installing always observe national regulations. electrical installation must comply with
the local safety standards and regulations
Before any operation :
always read chemical Material Safety Data Sheet (MSDS)
always discharge the liquid end before servicing the pump .
empty and rinse the liquid end before work on a pump that has been used with
hazardous or unknown chemicals.
Always use protective equipment, gloves, and goggles when handling fertilizers, acid and
other chemicals!
Do not use in explosive area (EX).
Do not use with flammable chemicals.
Do not use with radioactive chemicals.
This equipment requires regular maintenance to ensure potability requirements of the
water and maintenance of improvements as declared by the manufacturer.
