TECshow ORBIT HEX Manual de usuario
ORBIT HEX
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
Overview
Orbit Hex is an excellent centerpiece eect powered by 5 x
RGBWY-UV 15W LEDs that provides 1º razor sharp beams.
This xture is equipped with 6-in-1 LED technology, giv-
ing its user the possibility of working with a wide range of
colors. The ultra sensitive sound active mode, high speed
and limitless pan rotation are three of the most highlighted
aspects of this xture. Orbit Hex is an ideal alternative for
discos, dance oors and mobile applications, where exibili-
ty, power and coverage are indispensable.
Specications
Source & Optics
Light Source: 5 15W RGBWA-UV LEDs
LEDs life: 50,000 hs.
Beam angle: 34º
Eects & Functions
Great coverage LED Centerpiece
34 razor sharp beams
Strobe eect
RGBWA-UV color mix
Color Macros
Dimmer: Full range 0-100%
Endless pan rotation
Optimized Sound-active mode
7 built-in shows
Control
Operational modes: Sound Active, Auto-run, DMX, Master/
Slave
DMX Channels: 13
High-speed stepper motor
Built-in microphone
Operating temperature: 10ºC~40ºC
Electrical
Power supply: AC100V~240V 50/60Hz
Max power consumption: 55W
Physical
4-digit LED display
Power supply connectors: Interlock In/Out
DMX connectors: 2 XLR connectors (XLR-3 In and Out)
Dimensions: 318x318x412.5 mm. / 12.5x12.5x16.2 in.
Weight: 3.65 Kg. / 8 Lbs.
p. 2ORBIT HEX
ENGLISH VERSION
• All maintenance must be carried out by a qualied
electrician.
• A minimum distance of 0.5m must be maintained between
the equipment and a combustible surface.
• The product must always be operated in a well ventilated area.
• DO NOT stare directly into the light source.
• Always disconnect the power before carrying out any
maintenance.
• The earth must always be connected to the ground.
• Ensure that all parts of the equipment are kept clean and
free of dust.
IMPORTANT
Every person involved with the installation, operation
and maintenance of this device has to be qualied.
• Follow the instructions of this manual.
• Consider this manual to be part of the total product.
• Keep this manual for the entire service life of the product.
• Pass this manual on to every further owner or user of
the product
• Download the latest version of the user manual from
the Internet.
OPERATING DETERMINATIONS
• This product is only allowed to be operated with an al-
ternating voltage of 100-240 V, 50/60 Hz.
• This device is designed for professional use, e.g. on stag-
es, in clubs, bars, theatres etc.
• Do not shake the device. Avoid brute force when install-
ing or operating the device.
• When choosing the installation-spot, please make
sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables ly-
ing around. Please make sure that the unit cannot be
touched or bumped.
• When using smoke machines, make sure that the de-
For your own safety, please read this user manual careful-
ly before you initially start-up.
SAFETY WARNING
vice is never exposed to the direct smoke jet and is in-
stalled in a distance of 0.5 meters between smoke ma-
chine and device.
• The ambient temperature must always be between -15°
C and +45° C. Keep away from direct insulation (particu-
larly in cars) and heaters.
• Never use the device during thunderstorms. Over volt-
age could destroy the device. Always disconnect the de-
vice during thunderstorms.
• The device must only be installed on a non-amma-
ble surface. In order to safeguard suicient ventilation,
leave 50 cm of free space around the device.
• For overhead use (mounting height >100 cm), always
x the xture with an appropriate safety-rope. Fix the
safety-rope at the correct xation points only. The safe-
ty-rope must never be xed at the transport handles!
• Only operate the xture aer having checked that the
housing is rmly closed and all screws are tightly fastened.
• Operate the device only aer having become familiarized
with its functions. Do not permit operation by persons
not qualied for operating the device. Most damages are
the result of unprofessional operation!
• Please consider that unauthorized modications on the
device are forbidden due to safety reasons!
• Never remove the serial barcode from the device as this
would make the guarantee void.
p. 3ORBIT HEX
ENGLISH VERSION
General Guidelines
• This device is a lighting eect for professional use on
stages, in discotheques, theaters, etc., the device was
designed for indoor use only.
• This xture is only allowed to be operated with the max
alternating current which stated in the technical speci-
cations in the last page of this manual.
• The device can work continuously for eight hours. Light-
ing eects are not designed for permanent operation.
Consistent operation breaks may ensure that the device
will serve you for a long time without defects.
• Handle with care, do not make the device by strong shocks.
• While choosing the installation-spot, please make sure
that the device is not exposed to extreme heat, moisture
or dust. Please don’t project the beam onto combustible
substances.The minimum distance between light-output
from the projector and the illuminated surface must be
more than 1 meter.
• Please do not in damp, overheat or dusty environment
install and use the device. Do not use light on fuel. The
distance between the device and the projectile to keep
at least 1 meter.
• If you use the quick lock cam in hanging up the xture,
please make sure the quick lock fasteners turned in the
quick lock holes correctly,and add safety rope.
• Operate the device only aer having familiarized with its
functions. Do not permit operation by persons not qual-
ied for operating the device. Most damages are the re-
sult of unprofessional operation.
• Please use the original packaging if the device is to be
transported.
• For safety reasons, please be aware that all modica-
tions on the device are forbidden.
• Any installation and maintenance must by professional
person.
• If this device will be operated in any way dierent to the
one described in this manual, the product may suer
damages and the guarantee becomes void. Further-
more, any other operation may lead to short-circuit,
burns, electric shock, lamp explosion, crash, etc.
p. 4ORBIT HEX
ENGLISH VERSION
Installation instruction
CAUTION!
Please consider the GB7000.15/EN60598-2-17 and the oth-
er respective national norms during The installation. The
installation must only be carried out by a qualied person.
• The applicable temperature for the lighting is between
-25°C to 45°C. Do not use the lighting under or above the
temperature.
• The installation of the eect has to be built and con-
structed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
• The installation must always be secured with a second-
ary safety attachment, e.g. an appropriate safety rope.
Never stand directly below the device when mounting,
removing or servicing the xture.
• The operator has to make sure the safety relating and
machine technical installations are approved by an ex-
pert before taking the device into operation for the rst
time.
• These installations have to be approved by a skilled per-
son once a year.
• Overhead mounting requires extensive experience, in-
cluding among others calculating working load limits,
installation material being used, and periodic safety in-
spection of all installation material and the device. If you
lack these qualications, do not attempt the installation
yourself. Improper installation can result in bodily injury.
MENU and display
1. LED Display
2. MODE/ESC button
3. UP button (UP)
4. DOWN button (DOWN)
5. Enter button (ENTER)
1. Signal input - 2. Signal output - 3. ON/
OFF switch - 4. Fuse 2A - 5. Power IN
6. Power Out
p. 5ORBIT HEX
ENGLISH VERSION
Menu operation
Remarks:
1. When the display ickering slowly means the current
MENU option, display ickering quickly means enters to set
the data.
2. If no operation within 10 seconds, the menu will return to
A001 display (the last 3 numbers mean the DMX address)
p. 6ORBIT HEX
ENGLISH VERSION
DMX table
CH Value Function
10-255 Pan endless rotation
2 0-255
0-30 : no function
31-140: Pan endless clockwise rotation (from fast to slow)
141-145: stop rotation
146-255: pan endless anti-clockwise rotation (from slow to fast)
3 0-255 Pan speed: invalid during endless rotation,226-235: light OFF when scanning:
236-2255: max speed
4 0-255 Red dimming
5 0-255 green dimming
6 0-255 Blue dimming
70-255 White dimming
8 0-255 Yellow dimming
9 0-255 Purple dimming
10 0-255
0-15: no function
Synchronous strobe:
16~95: strobe speed;
96~175: one time/second, OFF/ON proportion from low to high
Asynchronous strobe:176~255, Asynchronous strobe, strobe probability from
high to low from 176-255
11 0-255 master dimming
12 0-255
0-25: no function
26-205: each 20 values mean 1 color,
206-255: color changing, changing speed from fast to slow)
13 0-255
Marcos as below;
0-55: no function
56-75: sound control, each sound will switch to next Marcos as below, sound
sensitivity from low to high 40-80%
Remarks: this is not controlled by the sound sensitivity in MENU,the sound
sensitivity setting in MENU is valid for sound function in Auto only
76-105: red, clockwise rotation
106~135: green, counter-clockwise rotate
136~165: blue, clockwise rotate
166~195: white, counter-clockwise rotate
196~225: yellow, clockwise rotate, asynchronous strobe
226-255: 7 colors changing, with strobe (strobe 3 seconds, light ON 7 seconds),
anti-clockwise rotation
p. 7ORBIT HEX
ENGLISH VERSION
DMX-512 control connection
Connect the provided XLR cable to the male 3-pin XLR out-
put of your controller and the other side to the female 3-pin
XLR input of the light.You can chain multiple lights together
through serial linking, the signal cable should have two core
with shielded cable, the signal connectors are with XLR input
and output connectors. Please refer to the below diagram:
DMX address setting
Each xture must set a specic starting address. When re-
ceiving signal, xture will receive channel control signals of
this address from the DMX controller.
For easy to use, the user can set the same address for several
xtures , also can set up a unique address for every device.
If you set the same address for all xtures, all the xtures will
receive from the same DMX channels signal. All connecting
xtures are jointly controlled, controller can’t separate con-
trol a device.
If you set a dierent address for each xture, each xture will
receive unique signal and can be controlled by DMX control-
ler separately.
This xture has 12 channels.you should set the starting ad-
dress of the rst unit to 1, the second unit to 14(1*13 + 1), the
third unit to 27(2*13+ 1), and so on.
p. 8ORBIT HEX
ENGLISH VERSION
DMX-512 connection with
DMX terminator
If there are many lines or lights, it is recommended to use a
DMX terminator to prevent DMX signal corruption, the DMX
terminator is an simple XLR plug with a 120 Ω resistor con-
nected between pins 2 and 3,which is then plugged into the
output XLR socket of the last xture in the chain.
Welding a 120 ohm resistor be-
tween 2 and 3 pins male XLR , and
insert it into the signal output of
the last device
p. 9ORBIT HEX
ENGLISH VERSION
Information Error
Fixture will reset when turn on. If one or more channels have
error, display will show“XX-ERR”,“XX” means PAN,TILT, Eg:
displaying“PAN-ERR” means PAN RESET have problems. If
both PAN and TILT error at the same time, display board will
show“PAN-ERR”“TILT-ERR”. Fixture will reset all the time and
not work as usual if appear one or more error. Please con-
tact dealer or manufacture and let the experience person to
maintain, do not open and maintain by user self.
Rigging:
Insert the quick-lock fasteners of the rst holder into the re-
spective holes on the bottom of the device.Tighten the quick-
lock fasteners fully clockwise.
Make the nished installed mounting bracket tighten on the
xed bracket.
Pull the safety rope through the holes on the bottom of the
base and over the trussing system or other safe xation spot.
Note:This step is quite important to ensure that xture
will not drop down for the damage of clamp.
- Rapid locking hook
- Safety-rope
p. 10ORBIT HEX
ENGLISH VERSION
Tabla de contenidos
Idiomas:
Manuales populares de Iluminación del hogar de otras marcas
JONATHAN Y
JONATHAN Y JYL5019A Manual de usuario
JONATHAN Y
JONATHAN Y JYL6007A Manual de usuario
Philips
Philips Ledino 31606/11/16 Manual de usuario
Salus
Salus UG600 Manual de usuario
Safavieh Lighting
Safavieh Lighting CANDRI TBL4427A Manual de usuario
Hunter
Hunter Bullet Spotlight Kit Manual de instrucciones
