PIN Code
•PIN Code (Personal Identification Code, 4-8digits) protects your SIM card against unauthorized use. The PIN comes with the SIM card. If you start the PIN check function, then you will be required to input
PIN code each boot.
•If you enter an incorrect PIN three times in succession, the SIM card will be locked, the unlock method is as follows:
•According to the screen prompt to enter the correct PUK code, then unlock the SIM card.
•Enter the new PIN code and press “OK Key”.
•Prompted to re-enter the new PIN code, re-enter the new PIN code and press "OK Key"
•Note: If you enter the wrong PIN in three times, SIM card will be locked, and you should use the PUK code to unlock. PUK code is usually stored in the network operators.
PUK Code
•Enter the PUK code (Personal unlock code) to unlock the PIN code. PUK code is provided from manufacturer with SIM card. In case you have not it, please contact your network operator. If you enter an
incorrect PUK ten times in succession, the SIM card becomes invalid. Please contact your network operator for a new card.
PIN2 Code
•PIN2 code (4-8 digits) is provided with SIM card. Please contact with the network operator to make sure if your SIM card support to these functions. If wrong PIN code is entered for three times, PIN2 code
will be automatically locked. You have to enter the correct PUK2 code to unlock PIN2 code. The unlock method is as below:
•According to the screen prompt to enter the correct PUK2 code, then unlock.
•Enter the new PIN2 code, and press “OK Key”
•Prompted to re-enter the new PIN2 code, re-enter the new PIN2 code and press "OK Key".
PUK2 Code
•PUK2 code (unlock PIN2 code, 8 digits) is used to unlock the locked PIN2 code. PUK2 code is provided from manufacturer with your SIM card. If you enter an incorrect PUK ten times in succession, you will
not be able to use PIN2 code function. Please contact your network operator for a new card.
•Prohibit password
•You will use the prohibit password when you start the Call barring. When you apply for this network function, the password can be obtained from the network operator.
3.4 Connect to Network
After installed the SIM card and mobile phone successfully, the mobile phone will automatically search available networks. After searching for networks, your phone goes into standby mode. You can dial and
receive calls, and you can make the following operations:
•Press Left Soft Key to enter main menu.
•Press Right Soft Key to enter Phonebook.
•Press Dial Key to enter the call records list.
Note: If the screen prompts, "emergency call only", you are only able to make emergency calls.
3.5 Charge the battery
•The battery charge indicator: your phone can monitor and display information about the battery.
•Normally you can see the rest of the battery power from the battery power of icons on the top right corner of the screen.
•When the battery power appears low, the screen displays "low power". If you choose warning tone in any mode of the scene mode, the alarm warning tone will still play.
•When the battery is on charge, a charging animation is displayed. When the charging animation stops, your phone is charged.
•Travel Charger: you can use a travel charger to charge your phone.
•Connect the travel charger adapter to the charging jack on left side of the phone.
•Plug the travel charger into the mains power supply socket.
•When charging, the electricity grid number of battery icon is a state of flux until fully charged.
•Warning: You must ensure that the local standard voltage and frequency match with your travel charger voltage and power ratings.
3.6 ON/OFF Phone
•Long press the End key, to boot the phone. The screen displays boot animation.
•If the phone asks you to input the phone password, key in the password and press the "OK" soft key. Phone password is preset to 0000.
•If the phone asks for PIN code, key in the PIN code and press "OK" soft key. New account SIM card, PIN code is provided by the network operator.
•Enter the standby screen, the mobile phone will search networks, when it finds the network, the current date and time will appear in the screen, now you can dial or answer the call.
•Long press the End key to turn off the phone.
3.7 Headset
When you insert the headset into the headset slot, it automatically goes into the headset mode; the headset plays the role of the earpiece and microphone.
Basic Functions
4.1 Dial Call
•In the standby screen, key in the area code and phone number, tap the dial-up icon or press the call button to dial. Press the End key to end the call.
•International call: Press the * key twice, enter "+" sign. Key in the country code, area code and phone number, press the call button.
•Dial extension: after key in the exchange number, press the * key three or four times, input "p" or "w", and then key in the extension number and press call button.
•To correct typing errors: Press the right soft key to delete the last character on the screen. To clear inputted numbers, long press the right soft key, or directly press the end key.
•Make phonebook calls: press the right soft key to access the phonebook in the standby screen.
•Input number and press call button, the mobile phone will automatically dial the corresponding number.
•Redial the last number: in the standby screen, press the call button to display dialed calls. Press the up or down key to select the number the call, and press the call button.
4.2 Adjust Volume
During a call, press the up and down navigation key to adjust the call volume.
4.3 Answer an incoming call
•Press the call button or left soft key to answer an incoming call.
•Press the End key to end the call.
•Directly press End key or right soft key to decline an incoming call.
Note: If the phone can identify dialing, it will display calling phone number (if mobile phone has storage calling phone records, then it display calling name and number). If the phone cannot identify dialing, it will
display calling number. You can also answer the call when you use the menu or phonebook.
5
