Introduction
Dear users:
In order to make your work smoothly, we give you some advice. Before you
connect and operate the product, you should make sure to read this manual
carefully and pay more attention to the notices.
Safety Information
To avoid personal injury or the product and other products connected with being
damaged, you should be careful of the safety information. ake sure use the
product according to the rules to prevent the occurrence of some potential harm.
Attention:
1. Power Voltage. The device can be only used in the area where the power is AC
220V± 20％/50Hz. Please don’t use in other areas.
2. Use proper power line and power. You must use the power line equipped
with the products randomly. Also you can use other qualified power line with
case which can protect earth terminal. The earth terminal of the outlet that is
matched with power cord should be well ground connection.
3. Attention ground connection. The product is grounded by the conductor in
the power line or terminal on the panel. To avoid electric shock, the ground
conductor of the power line must be grounded in a good connection with the
earth. Before you connect all the optical ports of the product, you should
be sure that the product is well grounded.
4. Take care of typical value of the ports. To avoid fire or electric shock, please
pay attention to all typical values and symbols labeled in the equipment and
this manual.
5. Don’t venture operation. When you doubt this product cannot work properly,
please consult our professionals instead of venturing operation.
6. Vibrations and Crash. This machine contains elaborate optical component,
you should avoid strenuous vibrations and crash.
7. Don’t open the cover of the machine and repair arbitrarily. There aren’t
components for users to repair in the main case of this product. If you need
repair the product, please contact our company professionals. As soon as you
open the cover, you will have no warranty.
