Technology Solutions 2166 Manual de usuario

USER GUIDE:

2166

BLUETOOTH

UHF RFID READER

www.tsl.com

Design • Development • Manufacture

TERMS & CONDITIONS

No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,

without permission in writing from Technology Solutions (UK) Ltd. This includes electronic or mechanical means,

such as photocopying, recording, or information storage and retrieval systems. The material in this manual is

subject to change without notice.

Technology Solutions (UK) Ltd (TSL®) reserves the right to make changes to any product to improve reliability,

function, or design. TSL®does not assume any product liability arising out of, or in connection with, the application

or use of any product, circuit, or application described herein. No license is granted, either expressly or by

implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination,

system, apparatus, machine, material, method, or process in which TSL®products might be used. An implied

license exists only for equipment, circuits, and subsystems contained in TSL®products. TSL®and the TSL®logo are

registered trademarks of TSL®. Other product names mentioned in this manual may be trademarks or registered

trademarks of their respective companies and are hereby acknowledged.

All software is provided strictly on an “as is” basis. All software, including ﬁrmware, furnished to the user is on

a licensed basis. TSL®grants to the user a non-transferable and non-exclusive license to use each software or

ﬁrmware program delivered hereunder (licensed program). Except as noted below, such license may not be

assigned, sublicensed, or otherwise transferred by the user without prior written consent of TSL®. No right to

copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall

not modify, merge, or incorporate any form or portion of a licensed program with other program material, create

a derivative work from a licensed program, or use a licensed program in a network without written permission

from TSL®. The user agrees to maintain TSL’s copyright notice on the licensed programs delivered hereunder, and

to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile,

disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof.

TSL®reserves the right to make changes to any software or product to improve reliability, function, or design.

TSL®does not assume any product liability arising out of, or in connection with, the application or use of any

product, circuit, or application described herein.

iPad, iPad Air, iPad mini, iPad Pro, iPhone, iPod, iPod touch are trademarks of Apple Inc., registered

in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries

and is used under license.

Use of the Made for Apple badge means that an accessory has been designed to connect speciﬁcally to the Apple

product(s) identiﬁed in the badge and has been certiﬁed by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

The

Bluetooth

®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Technology Solutions (UK) Ltd is under license. Other trademarks and trade names are those of

their respective owners.

www.tsl.com

CONTENT

Introduction 4

Parts of the 2166 UHF Reader 4

Technical Speciﬁcations 5

Using the 2166 UHF Reader 6

Removing/Installing the Battery 6

Charging and USB Connection 9

Button Operation 10

Reading Transponders 11

Status LEDs 12

Connections 13

USB Connection 13

Bluetooth

®wireless technology connection 15

Comparison of

Bluetooth

®Operating Modes 16

Changing the

Bluetooth

®Operating Mode 17

Setting up a

Bluetooth®

Connection with an Apple Product 19

Embedded SD Card 24

Summary 24

Auto Run File (AUTO.TXT) 24

Log File (LOG.TXT) 24

Software Development 26

Troubleshooting and Maintenance 27

Maintenance 27

Troubleshooting 27

Regulatory information 28

Information to the user – FCC 28

Canadian Warning Statements 29

Battery Information 30

Health and Safety Recommendations 31

Waste Electrical and Electronic Equipment (WEEE) 32

Warranty 32

About 34

About TSL®34

Contact 34

About HID Global 34

www.tsl.com

Technology Solutions’ 2166 UHF Reader provides Ultra High Frequency (UHF) Radio Frequency Identiﬁcation

(RFID), with optional barcode scanning functionality. The unit can be used stand alone or paired with a

Bluetooth

wireless technology enabled host device. It can be used with UHF transponders including the EPC Global Class 1

Generation 2 transponders.

INTRODUCTION

PARTS OF THE 2166 UHF READER

ePop-Loq®Connector

Status LEDs

Trigger Button

UHF Antenna

Figure 1: Parts of the 2166 UHF Reader

Battery Cover

Connection Status LED

Power Button

On-screen Keyboard Toggle Button

(Apple HID Mode only)

Battery Cover

Screw

(Optional) 2D Barcode

Scan Engine

www.tsl.com

INTRODUCTION

TECHNICAL SPECIFICATIONS

2166

Bluetooth

16th December 2022

Physical and Environmental Characteristics

Dimensions: 178.7 x 107.3 x 173.1 mm (LxWxH).

Weight: 865 g / 30.5 oz (including battery).

User input: Single stage trigger.

User feedback: Speaker, vibration motor, LEDs.

Power: Rechargeable Lithium Ion removeable

battery pack (11.25V, 2950mAh,

33.2Wh).

Minimum operating

time1:Light use2:

Moderate use3:

Heavy use4:

25 hrs

18 hrs

10.5 hrs

Input Rating: 15.0Vdc, 4.34A.

Enclosure materials: Polycarbonate and TPU.

Performance Characteristics

RFID engine: TSL®custom module with embedded

Impinj R2000.

Communication

protocols:

TSL®ASCII 2.0 parameterised command

set.

Memory: Embedded 16GB* NAND storage card -

store up to 250 million date and time

stamped EPCs

* For units manufactured in August 2020 onwards. Units sold

before this time will have 8GB of storage.

Compatible Host

devices (

Bluetooth

®):

Any

Bluetooth

®Host5supporting the

Serial Port Proﬁle (SPP) or Human

Interface Device (HID) proﬁle (Android,

iOS, Linux, Mac, Windows). Comparison

Bluetooth

®modes for TSL®UHF

Readers.

Compatible Host

devices (USB):

Any USB host with FTDI VCP driver

support (Windows, Linux, Mac, Android).

Environmental

Operating Temp.: -10°C to 55°C (14°F to 131°F).

Charging Temp.: 5°C to 40°C (41°F to 104°F).

Storage Temp.: Less than 1 month at at -20 to +60°C

(-4°F to 140°F).

Less than 3 months at -20°C to +45°C

(-4°F to 113°F).

Less than 1 year at -20°C to +20°C (-4°F

to 68°F).

Humidity: 5% to 85% non-condensing.

Drop Spec: 1.8m.

Tumble: 1500 0.5 metre tumbles at room

temperature

(3,000 cycles).

Environmental Sealing: IP67*.

Electrostatic

Discharge (ESD):

± 15kVdc air discharge; ± 8kVdc

contact discharge.

MIL-STD 810F: Meets and exceeds applicable MIL-STD

810F for drop, tumble and sealing.

RFID Performance

Standards supported: EPC Class 1 Gen 2 and EPC C1G2

(TBD).

Nominal read range6: Up to 9 m (29.5 ft).

Nominal write range6: Up to 4 m (13.1 ft).

Field: 110-degree forward facing (approx.)

measured from front of device.

Antenna: Circularly Polarized.

Frequency Range: EU: 865-868MHz; US: 902-928MHz.

Maximum Output

Power:

Up to 30 dBm (region dependent)

+ 4.0 dBiC Antenna.

*Please note; that this IP rating only applies to units with serials numbers ending in

-000800 or higher

Barcode Scanning

Optional 2D Barcode

Engine:

Optional TSL®custom 2D Barcode Scan

Engine module.

Sensor Resolution: 1280 x 960 pixels, rolling shutter

Field of View: Horizontal: 44.5°, vertical: 33.5°

Focal Distance: From front of engine: 15.24 cm (6 in.)

Aiming LED: Green LED

Illumination: 1 warm white LED

Symbologies

Supported:

1D: All major codes

2D: PDF417, MicroPDF417, Composite, RSS,

TLC-39, Datamatrix, QR code, Micro QR code,

Aztec, MaxiCode Postal Codes: US PostNet,

US Planet, UK Postal, Australian Postal, Japan

Postal, Dutch Postal (KIX).

Ranges7:Barcode Near Far

5 mil Code 39 6.1 cm 24.1 cm

5 mil Code 128 7.1 cm 22.9 cm

6.67 mil PDF 417 6.1 cm 20.3 cm

10 mil DataMatrix 7.4 cm 21.6 cm

100% UPCA 4.6 cm 49.5 cm

15 mil QR 3.0 cm 29.2 cm

20 mil QR 3.0 cm 35.6 cm

Communication

Bluetooth

®:

Bluetooth

®Version 4.2.

Bluetooth

®Frequency

Range:

2.4 - 2.4835 GHz.

Bluetooth

® Proﬁles: SPP Proﬁle, HID Proﬁle, Apple iAP2,

Bluetooth

®Low Energy.

Bluetooth

®Range8: Up to 100m.

Bluetooth

®Pairing: Simple Secure Pairing, NFC OOB

Pairing.

Direct USB Connection via ePop-Loq®cases

(separate purchase).

1Minimum operating time ﬁgures are based on new units that have been stored, charged and

operated within the stated Environmental Speciﬁcations. Units stored over 3 months must

be recharged every 3 months. Number of transponders in the environment affects minimum

operating time.

2Light Use: Continuous RFID inventories for 20s of every 120s

3Moderate Use: Continuous RFID inventories for 10s of every 30s

4Heavy Use: Continuous RFID inventories for 59s of every 60s

5Compatible

Bluetooth

®stack required in the Host device

6Tag Read/Write performance is dependent on tag type, items tagged, number of tags in the

ﬁeld and other radio and environmental factors

7Artiﬁcial lighting can affect scanning performance

8Open ﬁeld

2166 SPECIFICATIONS*

*These speciﬁcations only apply to TSL 2166 Readers with serial numbers higher than 7000.

(These technical speciﬁcations are taken from the 2166 Datasheet v2.03 - 16th December 2022)

www.tsl.com

USING THE 2166 UHF READER

REMOVING/INSTALLING THE BATTERY

To remove the battery, locate the screw on the Battery Cover and rotate it anti-clockwise using a mid-sized coin.

The Battery Cover can then be removed. The battery and ‘Battery Pull Tab’ will now be visible. Use the ‘Battery Pull

Tab’ to slide the battery out.

Figure 2: Battery Removal

Rotate ‘Battery Cover Screw’ anti-clockwise

by about two thirds of a turn.

Locate ‘Battery Cover Screw’

3Remove the ‘Battery Cover’ using the ﬁnger

holes and then pull on the ‘Battery Pull Tab’ to

slide the battery out

‘Battery Pull Tab’

Battery Cover ‘Battery Cover

Screw’

Removing the Battery

Battery Cover

www.tsl.com

To install the battery, ﬁrst orientate the battery so that the electrical contacts on the battery line up with the contacts

inside the 2166 battery cavity. Slide the battery into the battery cavity, then replace the Battery Cover. Make sure

that the ‘Battery Pull Tab’ does not get stuck between the battery cover and the battery cavity - if this happens then

the environmental sealing will be compromised.

Figure 3: Battery Pull Tab - Correct and Incorrect posiitoning

‘Battery Pull Tab’ is trapped

between seal

Tuck Battery Pull Tab

out of the way

1 2 Replace Battery Cover

‘Battery Pull Tab’ is tucked behind

battery cover

USING THE 2166 UHF READER

Installing the Battery

CAUTION!

RISK OF EXPLOSION IF

BATTERY IS REPLACED BY

AN INCORRECT TYPE.

DISPOSE OF USED

BATTERIES ACCORDING

TO THE INSTRUCTIONS.

www.tsl.com

Locking the Battery Cover

To lock the battery cover, lightly tighten the ‘Battery Cover Screw’ in a clockwise direction using a mid-sized coin.

Do not over-tighten the screw as this will damage the seal.

Lightly rotate the ‘Battery Cover Screw’ clockwise until the padlock symbol meets the arrow. Do not over-

tighten or you will risk damaging the seal.

Locate ‘Battery Cover Screw’

USING THE 2166 UHF READER www.tsl.com

USING THE 2166 UHF READER

CHARGING AND USB CONNECTION

Setting up the 2166 Docking Station Kit

The 2166 UHF Reader kit uses a dedicated Docking Station for charging and synchronisation. The Docking Station

Kit includes the dock, a power supply unit and a Mini USB cable. A separately purchased IEC mains cable is also

required. The Mini USB cable and power cable are inserted into the 2166 Docking Station in the orientation shown

below. Note that both cables plug into the back of the docking station at a slight upwards angle.

Figure 5: Inserting the 2166 UHF Reader into the 2166 Docking Station

Using the 2166 Docking Station

To dock the 2166 UHF Reader, slide it into the docking station in the direction shown:

1166-CRD-01-KIT:

65W Power Supply

Mini USB Cable

1166/2166 Docking Station

Figure 4: Components required for charging the 2166 UHF Reader

IEC Mains Cable

(region speciﬁc)

www.tsl.com

USING THE 2166 UHF READER

BUTTON OPERATION

The 2166 UHF Reader has a Primary button action and a Secondary button action which can be initiated by

different button clicks: By default, the Primary action scans for UHF transponders, whilst the Secondary action

initiates the barcode scanner (Barcode scanning is only available with the 2D Imager Antenna variant). Which

operation is performed depends on the way in which the button is pressed. The Single and Double press button

options are also programmable.

Primary Button Click and Hold

- UHF Transponder Read

The primary button click is a standard button action:

●To initiate a primary button click press and hold the trigger button.

●To terminate a primary button click release the trigger button.

In the default conﬁguration the 2166 UHF Reader scans for UHF transponders as the primary function. The 2166

UHF Reader will continue to scan for UHF transponders while the button is pressed. It will stop scanning once the

button is released (and the current operation completes).

Secondary Button Double Click and Hold

– Barcode Scan (2D Imager Variant only)

The secondary button click is a single click quickly followed by a second press (press-release-press).

●To initiate a secondary button click press then release then press and hold the trigger button.

●To terminate a secondary button click release the trigger button.

In the default conﬁguration the 2166 UHF Reader scans for barcodes as the secondary function. The 2166 UHF

Reader will continue to scan for a barcode while the button is pressed. It will stop scanning when any of the

following conditions are met:

●A barcode is scanned.

●The button is released.

●The barcode engine times out.

www.tsl.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de código de barras de Technology Solutions

Technology Solutions

Technology Solutions 1166 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario