Technoline WS6501 Manual de usuario

Manual draft for WS6501

INSTRUCTION MANUAL

Page 1 of 15

B A

Manual draft for WS6501

FEATURES: MAIN UNIT

A. IR sensor

It is a contactless key for user to wave hand within 3 inches distance to activate the backlight or

snooze function

B. Air pressure trend

C. Low battery indicator

D. Weather forecast display

Displays the weather-forecast icons for sunny, slightly cloudy, cloudy, rainy, stormy and snowy.

E. Indoor temperature and humidity display

F. MIN/MAX display for indoor temperature and humidity

G. Outdoor temperature display

H. Auto scroll icon

I. MIN/MAX display for outdoor temperature

J. Low battery indicator for outdoor transmitter

K. Barometric history indicator

Indicates the recorded air pressure reading in the past 24 hours

L. Barometric pressure window

Displays the barometric pressure reading in mb hpa or inHg.

M. Barometric pressure chart

Shows the barometric pressure trend chart for the past 24 hours

N. Moon phase

O. Sun position and Moon position

Sun rises from the east (E) and goes down in the west (W) everyday. This weather station can

calculate the different sunrise, sunset, moonrise and moonset time according to the input city

and diagrams the sun and moon position in a day at 3 hour interval.

P. Sunrise and Sunset time

Shows the exact sunrise time of a pre-set city in a specific day. Press [CITY] button once to

toggle to see the sunset time.

Q. City name

Abbreviation of a city name in Europe. The user must set to his own located city before start to

use this weather station to have the correct sunrise, sunset time & moon phase.

R. Radio controlled time

Display current time, current time and weekday, calendar or alarm time

S. Radio reception signal

Indicates the condition of DCF77 radio controlled time reception

T. Alarm on icon

Appears when alarm is activated

Page 2 of 15

Manual draft for WS6501

DESCRIPTION OF BUTTONS

Sculpture has 10 major function buttons on the back

1. [ MEMORY ]

- Toggle to view the Max/Min reading of the Indoor Temperature/Humidity & Remote

temperature.

Page 3 of 15

Press & hold 2 seconds to clear Indoor temperature/humidity memories & Remote

emperature records.

2. [ CHANNEL ]

Select among channel 1, 2, 3, 4, 5 or to enter auto scroll mode.

- Press and hold 2 seconds to activate or deactivate the sensor searching mode

Manual draft for WS6501

3. [ HISTORY ]

- Press to view the past 24-hour barometric readings.

- Press and hold 2 seconds to enter the altitude adjustment mode.

4. [ C/F ]

- Toggle the temperature unit °C ÅÆ °F

5. [ UNIT ]

- Press to toggle the pressure unit. (hPa/mbÆinHg)

6. [ ▲]

Page 4 of 15

pN’

-alendar

(

Press once to increase the date to view the MOON PHASE status, Sunrise and Sunset time of a

pecific day in Day-Month-Year (or Month-Day-Year depends on the date format setting)

- Press once to increase the setting in CLOCK, CALENDAR or ALARM setting mode

- Press & hold 2 seconds to manually activate or deactivate the radio controlled function

7. [ ▼]

Press to decrease the date to view the MOON PHASE status, Sunrise and Sunset time of a

pecific day in Day-Month-Year (or Month-Day-Year depends on the date format setting)

Press once to decrease the setting in CLOCK, CALENDAR or ALARM setting mode

Press once to arm or disarm the daily alarm under alarm display mode

8. [ CITY ]

- Press once to toggle between the sunrise and sunset time of a pre-set city in a specific day

Press and hold 2 seconds to enter city setting mode, use [ ▲] and [ ▼] to select the

bbreviation of country name and then the city name according to the list in the appendix,

ress [CITY] button to confirm. Use [ ▲] and [ ▼] to select the DST (Daylight Saving Time) ‘O

r ‘OFF’, press [CITY] button to confirm.

9. [ CLOCK ]

Toggle amongst display for Clock-Sec (HR-MIN-Sec), Clock-day (HR-MIN-Weekday), C

Date-Month-Year), alarm time and repeat…

10. [ MODE ]

-Press & hold 2 seconds to enter backlight color setting mode.

Slide switch [BACKLIGHT] on the rear side to select the backlight mode

Power Supply

Slide switch position Battery Only Battery & Adapter Adapter only

Auto Wave hand in front of the IR sensor to activate backlight for 5 seconds

OFF Disable the backlight function

ON Wave hand in front of

the IR sensor to activate

backlight for 5 seconds

Backlight always on

Manual draft for WS6501

GETTING STARTED

This Weather Station was designed for easy set up. For best operation, the following steps are

required to be done in the proper sequence.

1. FIRST INSERT BATTERIES IN THE MAIN UNIT, THEN IN TRANSMITTER

2. MAIN UNIT CANNOT BE SET MANUALY UNTIL THE WIRELESS TRANSMITTER REGISTRATION

PROCEDURE HAS BEEN COMPLETED.

3. POSITION THE REMOTE UNIT AND MAIN UNIT WITHIN EFFECTIVE TRANSMISSION RANGE, WHICH, IN

USUAL CIRCUMSTANCES, IS 75 METERS.

Although the remote unit is weather resistant, it should be placed away from direct sunlight, rain or

snow.

BATTERY INSTALLATION FOR MAIN UNIT

1. Turn the metal nut anti-clockwise on the bottom of the unit to open and release the battery

compartment;

2. Insert 4 AA size 1.5V alkaline battery as indicate by the polarity;

3. Push the battery compartment back, turn the metal nut clockwise to lock;

Note: Replace the batteries when the low battery indicator appears.

WIRELESS REMOTE SENSOR REGISTRATION PROCEDURE

1. Insert 4 x AA batteries first to the main unit, the outdoor temperature display shows - - . – While

the wave icon will keep blinking for 2 minutes indicate unit is in sensor searching mode.

2. In a second step, insert the 2 x AAA batteries in the transmitter unit. The LED on the front panel

will start flashing at a rate of one time per around 2 seconds indicates channel-1 is in use.

3. While the LED in the sensor unit is flashing, press once the [CH] key will change the sensor

channel setting to 2. Keep toggle on [CH] key can change channel setting up to 5. The LED is

blinking at a frequency to indicate the channel setting. i.e. continous blinks 2 times indicate

channel-2 is selected.

Note: If user does not press any key for 10 seconds, it will exit the channel setting mode and transmit

the RF signal. The main unit will register the temperature reading.

(If the transmitter has the LCD display, the C/F key will toggle the temperature unit on the LCD.)

REMOTE CHANNEL AUTO-SCROLLING

This weather station is equipped with an auto-scroll function. While the auto-scroll function is set, the

unit will automatically cycle to display the temperature of each remote sensor for 6 seconds.

1. To retrieve manually the specific sensor temperature reading, press CHANNEL key until desired

channel number is displayed.

2. To enable auto-scroll function, use CHANNEL button to select channel 1, 2, ... until auto scroll icon

appears on the left hand corner of the 3rd line display.

Page 5 of 15

Manual draft for WS6501

DCF 77 RADIO CONTROLLED CLOCK

There are 4 wave icons flash to indicate 4 levels of RCC signal status:

If there has no wave above the reception tower that means the signal is very weak and the clock

can not be set by the RCC signal, please try to rotate the unit or other windows to seek for a better

RCC reception location. Besides, the RCC signal is the strongest at night, the user can manually set

the clock to locale time and leave it overnight to receive the RCC signal.

If nothing else works, take the clock outdoors after dark at night, remove and re-install the batteries

and leave it overnight to force it to look for the radio controlled time signal. If the clock works

outdoors but not indoors, you probably have a local interference problem inside your house or

building.

Once the time signal is received, the wave icon will stay on the LCD, and time and calendar will

automatically be updated.

Note: During 10 minutes of time signal reception, all manual settings will be suspended. If setting is

desired, press once [▲] key to deactivate the reception. You can also press and hold the same key

for 3 seconds to manually activate the reception in normal mode. The clock will work as a normal

quartz clock if it can’t receive the RCC signal.

SET THE CLOCK, CALENDAR & LANGUAGE

1. In clock time display mode, press & hold [CLOCK] button for 2 seconds to enter clock setting

mode. Flashing 24 hours will appear.

2. Press [ ▲] or [ ▼] button to switch between 24 hours and 12 hours format, and then press

[CLOCK] button to confirm.

3. The hour digits will flash. Use the [ ▲] button to increase by one hour or [ ▼] button to decease

by one hour to your desired hours. Holding down either button will change the increment unit

rapidly. Press [CLOCK] button to confirm.

4. The minute digits will flash. Use the [ ▲] button or [ ▼] button to set your desired minutes. Holding

down either button will change the increment unit rapidly. Press [CLOCK] button to confirm.

Note: Every change of minute digit will automatically reset the seconds to zero.

5. The year digit will flash and Yr icon appears. Press [ ▲] or [ ▼] button to set your desired year.

Press [CLOCK] button to confirm.

Note: Year range is from 2000 to 2099.

6. D and M icons will flash. Press [ ▲] or [ ▼] to select D M (Date Month) or M D (Month Date)

format. Press [CLOCK] button to confirm.

7. Month digits will flash. Press [ ▲] or [ ▼] button to set your desired month. Press [CLOCK] button

to confirm. Do the same to set Date.

Page 6 of 15

Manual draft for WS6501

Note: The moon phase and the weekday will be automatically calculated and displayed for the

date set above.

8. E digit will flash. Press [ ▲] or [ ▼] button to switch 5 languages display of weekday

(English/German/French/Spanish/Italian. See table 1). Press [CLOCK] button to confirm and exit

setting mode.

Table 1

Note: If no key press during setting mode for 10 seconds, it will automatically keep the setting and

exit to normal display.

To set daily alarm

1. In clock time display mode, press [CLOCK] button thrice to switch to display alarm time.

2. Press and hold [CLOCK] button for 2 seconds to enter alarm setting mode.

3. The hour digits will flash, use [ ▲] button to increase by one hour or [ ▼] button to decease by

one hour to your desired hours. Holding down the button will change the increment unit rapidly.

Press [CLOCK] button to confirm.

4. The minute digits will flash. Use [ ▲] button to increase by one minute or [ ▼] button to

decease by one minute to your desired minutes. Holding down the button will change the

increment unit rapidly. Press [CLOCK] button to confirm and finish the setting.

5. When alarm is beeping, wave hand in front of the IR sensor to snooze for 5 minutes. Press

[CLOCK], [ ▲], [ ▼] or [CITY] button to stop the alarm for a day.

Page 7 of 15

Manual draft for WS6501

MOON PHASE

The weather station is equipped with 8 moon phases display (i.e. from new moon to waning

crescent) on the screen.

Full Moon

Waxing Gibbous Waning Gibbous

First Quarter Last Quarter

Waning Crescent

Waxing Crescent

New Moon

-The animated rolling moon phase will pause 5 seconds in the place of the current moon phase

calculated by the current calendar date

-The user also can press [ ▲] button or [ ▼] button go through the calendar to check the moon

phase for a specific date other than the current date

SUN POSITION, MOON POSITION, SUNRISE and SUNSET TIME

The weather station will automatically calculate the sun position, moon position, sunrise and sunset

time based on the input city location and the set data.

WEATHER FORECAST

Sunny

Page 8 of 15

Manual draft for WS6501

Slight Cloudy

Cloudy

Rainy

Stormy

Snowy

The weather station is capable of detecting local barometric pressure changes, and based on the

data collected, can predict the weather for the next 12 to 24 hours.

Note:

Page 9 of 15

Manual draft for WS6501

1. The accuracy of a general pressure-based weather forecast is about 70 to 75%, and therefore,

we cannot be held responsible for any inconveniences so caused by an inaccurate one.

2. The weather forecast is meant for the next 12 to 24 hours. It may not necessarily reflect the

current situation.

3. The ‘Sunny’ forecast covering night hours indicates clear weather.

HOW TO CHECK THE BAROMETRIC PRESSURE

The current and historical barometric pressure is shown on the atmospheric pressure window.

For monitoring the Sea Level barometric pressure reading at certain altitude, the user needs to

select the local altitude (-100 to 2500 meter or -330 to 8200 foot) for the altitude setting. The weather

station requires entry of elevation in meter and in foot separately. To determine your location

elevation, please either contact your local library, TV/radio weather forecaster, or via Internet.

1. To enter the altitude compensation setting mode, press and hold [HISTORY] button for 2 seconds

to switch from Barometric Pressure to Altitude adjust mode for 10 seconds and the meter icon

flashes.

2. During Altitude adjust mode, press [UNIT] button to toggle between meter and foot unit. Then

press [HISTORY] button to confirm.

3. Last altitude reading will flash, press [UNIT] button to increase the value by 10. Hold down the

button to have fast stepping. Press [HISTORY] button once to confirm and exit setting.

The atmospheric pressure can be displayed in mb/hPa, inHg. Press [UNIT] to select the pressure unit.

The weather station is equipped with barometer reading for 24hr history. If you want to check the

pressure history for a particular hour during the past 24 hours, press [HISTORY] button, each press on

the button will go back by an hour.

Note:

If the weather station was just installed with batteries and past data was not yet measured, it will

display ‘----‘.

The recorded barometric changes for the past 24 hours are displayed in a bar chart below the

barometric pressure window.

Page 10 of 15

Tabla de contenidos

Otros manuales de Estación meteorológica de Technoline

Technoline

Technoline WS 9172 Manual de usuario

Technoline

Technoline WS 6449 Manual de usuario

Technoline

Technoline WS9255 Manual de usuario

Technoline

Technoline WT 245 Manual de usuario

Technoline

Technoline WS6447 Manual de usuario

Technoline

Technoline WS8014 Manual de usuario

Technoline

Technoline WS6815 Manual de usuario

Technoline

Technoline WS6447 Manual de usuario

Technoline

Technoline TEMPERATURE STATION Manual de usuario

Technoline

Technoline WS 6830 Manual de usuario

Technoline

Technoline WS550 Manual de usuario

Technoline

Technoline WS6850 Manual de usuario

Technoline

Technoline WS 9485 Manual de usuario

Technoline

Technoline WS 6812 Manual de usuario

Technoline

Technoline WS6762 Manual de usuario

Technoline

Technoline WS9252 Instrucciones de instalación

Technoline

Technoline WS 9123 Manual de usuario

Technoline

Technoline WT 171 Manual de usuario

Technoline

Technoline WS 9117 Manual de usuario

Technoline

Technoline WS9125 Manual de usuario

Technoline

Technoline WS 6448 Manual de usuario

Technoline

Technoline WS 9910 Manual de usuario

Technoline

Technoline WS9135 Manual de usuario

Technoline

Technoline WS 585 Manual de usuario

Manuales populares de Estación meteorológica de otras marcas

Auriol

Auriol AHFL 433 A1 Manual de usuario

NexSens

NexSens G2-HYDROMET Manual de usuario

Hyundai

Hyundai WS 2202 Manual de usuario

IROX

IROX HBVR761 UV-X Manual de usuario

La Crosse Technology

La Crosse Technology C86371 Manual de usuario

ADE

ADE WS 1711 Manual de usuario

Auriol

Auriol z29592 Manual de usuario

Auriol

Auriol 296289 Manual de usuario

Hyundai

Hyundai WS 2266 Manual de usuario

La Crosse Technology

La Crosse Technology WS-2210 Manual de usuario

La Crosse Technology

La Crosse Technology WS-811561 Manual de usuario

Ventus

Ventus W177 Manual de usuario

National Geographic

National Geographic VA Colour RC Manual de usuario

Renkforce

Renkforce 1208067 Manual de usuario

Levenhuk

Levenhuk Discovery Report WA40 Manual de usuario

Instant Transmission

Instant Transmission MA 10410 Manual de usuario

Lutron Electronics

Lutron Electronics PHB-318 Manual de usuario

WAREMA

WAREMA EWFS Weather station eco Manual de usuario