Technoline WT-465 Manual de usuario
Technoline
WT-465
DIGITAL RADIO ALARM CLOCK
INSTRUCTION MANUAL
Read this manual carefully to get the best performance from this unit.
LOCATION OF CONTROL
1. /AUTO 9.PMINDICATOR
2. MEMORY / TIME SET 10. AL1 INDICATOR
3. TUNING DOWN / MINUTE 11. NAP INDICATOR
4. TUNING UP / HOUR 12. FM INDICATOR
5. VOLUME - / AL2 13. AL2 INDICATOR
6. VOLUME + / AL1 14. DIGIT DISPLAY
7. SNOOZE / DIMMER / SLEEP/ NAP 15. FM ANTENNA WIRE
8. SLEEP INDICATOR 16. DC INPUT
BOTTOM OF SET: Battery compartment for 2 x 1.5 volt (LR6, UM-3, AA)
batteries. (not included) for temporary time storage.
GETTING STARTED: Use the AC/DC adapter to connect the radio alarm clock
with a regular household plug.
SET TIME
1. Press and hold TIME SET for two seconds.
2. Preset 24H shows 24 hour mode.
3. Press Tuning ＾or ﹀ to select 24 or 12 hour mode.
4. Press and hold TIME SET and time digits [0:00] are blinking.
5. Press Tuning ＾to set the hour and Tuning ﹀to set the minute.
6. Press TIME SET again to confirm setting or the setting will be confirmed
automatically if no button is used within 3 seconds.
LISTEN TO FM RADIO
For better reception, fully extend and adjust the position of the FM antenna
wire.
1. Press / AUTO to turn on FM radio.
¾[FM frequency] is displayed and FM indicator is light up.
2. Press TUNING ＾ or ﹀for two seconds.
¾The FM Tuner tunes to a station with strong reception automatically.
To search for a radio station manually:
Press TUNING ＾ or ﹀repeatedly to tune to a radio station
STORE FM RADIO STATIONS
You can store up to 20 FM radio stations in preset channel automatically or
manually.
STORE FM RADIO STATIONS AUTOMATICALLY (AUTO SCAN)
1. Press / AUTO to turn on FM radio.
2. Press / AUTO and hold for 2 seconds.
¾The received stations are automatically stored to preset numbers.
STORE FM RADIO STATIONS MANUALLY.
1. Tune to an FM radio station.
2. Press MEMORY to activate the storing mode. The display is blinking.
3. Press TUNING ＾ or ﹀to select the preset number.
¾[P 01 ~ P 20] is preset station numbers.
4. Press MEMORY to select a number for the selected station.
LISTEN TO A PRESET FM RADIO STATION
In FM mode, press MEMORY to select a preset number.
Note
The digit display return to clock display if no buttons is pressed for 10 seconds
SET ALARM TIMER
Make sure that you have set the clock correctly.
You can set two separate alarm timers. For the alarm sound, you can select
the FM radio or the buzzer.
1. Press / AUTO to Clock mode.
2. Press and hold AL1 or AL2 for two seconds and alarm digits [0:00] are
blinking.
3. Press Tuning ＾to set the alarm hour and Tuning ﹀to set the alarm
minute.
4. Press TIME SET again to confirm setting or the setting will be confirmed
automatically if no button is used within 3 seconds.
5. Press AL1 or AL2 again to select a sound source. FM radio or alarm sound.
The options can be selected in following order:
Alarm off (OFF) > alarm sound (bb) > radio alarm
Note
The selected radio volume is the alarm volume.
SNOOZE ALARM
When alarm sounds, press SNOOZE to activate the snooze time 9 minutes.
¾The AL1 or AL2 indicator keeps blinking.
SET SLEEP TIMER
This radio clock can switch to standby mode automatically after a preset
period.
1. Press / AUTO to radio mode.
2. Press SNOOZE/DIMMER/SLEEP multi-function button repeatedly to select
the sleep timer period (in minutes).
To deactivate the sleep timer, press SNOOZE/DIMMER/SLEEP multi-function
button repeatedly until back to radio frequency.
SET NAP TIMER
1. Press / AUTO to clock mode.
2. Press SNOOZE/DIMMER/SLEEP multi-function button repeatedly to
select the sleep timer period (in minutes).
To deactivate the nap timer, press SNOOZE/DIMMER/SLEEP multi-function
button repeatedly until sleep indicator is off.
Sleep / Nap Timer period circle as follow:
120 > 90 > 60 > 45 >30>15>05
OFF
ADJUST VOLUME
While listening, press VOLUME + or - to adjust volume.
ADJUST DISPLAY BRIGHTNESS
Press and hold DIMMER for 2 seconds repeatedly to select a high or low
brightness level.
BATTERY BACK-UP
Slide open the battery cover at the back of your clock, then 2 x 1.5 volt (LR6,
UM-3, AA) batteries to the battery compartment. Make sure +/- polarity of the
battery are facing in the right directions. Then replace the battery cover.
The battery is for back-up only and just helps to save your settings in cases of
missing power. There is no display in back-up mode.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which
maybe caused by electro-static discharge or other interference, unplug the DC
jack to disconnect the AC power (and remove the backup battery). The clock
will be reset to default settings and you need to set it again.
CARE OF YOUR LED ALARM CLOCK
1. Do not expose the unit to extreme temperature, water or direct sunlight.
2. Avoid contact with any corrosive materials.
3. Do not subject the unit to excessive force, dust or humidity.
4. Do not open the inner back case or tamper with any components of this
unit.
5. Do not plug in any other AC/DC adaptor with incorrect specifications or
voltage.
SPECIFICATIONS
Power Source : 100-240V ~50/60Hz,
Tuner Range : FM 87.5-108.0MHz
Power Consumption : 5W
Otros manuales para WT-465
1
Tabla de contenidos
Otros manuales de Despertador de Technoline
Technoline
Technoline WT 180 Manual de usuario
Technoline
Technoline WT268 Manual de usuario
Technoline
Technoline WT 496 Manual de usuario
Technoline
Technoline WT-465 Manual de usuario
Technoline
Technoline WT 770 Manual de usuario
Technoline
Technoline G Manual de usuario
Technoline
Technoline WT 463 Manual de usuario
Technoline
Technoline K Manual de usuario
Technoline
Technoline WS6815 Manual de usuario
Technoline
Technoline WT 519 Manual de usuario
Technoline
Technoline WT 529 Manual de usuario
Technoline
Technoline WT265 Manual de usuario
Technoline
Technoline WS6815 Manual de usuario
Technoline
Technoline WT 197 Manual de usuario
Technoline
Technoline WT260 Manual de usuario
Technoline
Technoline Dream Mate Pro Manual de usuario
Technoline
Technoline WT 330 Manual de usuario
Technoline
Technoline WQ 296 Manual de usuario
Technoline
Technoline DreamMatePro Manual de usuario
Technoline
Technoline WT 514 Manual de usuario
