Technogym GROUP CYCLE Manual de usuario

CONSOLE

User manual

Group Cycle - Console

CONTENTS

Description of the buttons.......................................................................................3

Description of the display........................................................................................4

Starting an exercise..................................................................................................7

Technogym threshold power test ...........................................................................8

Using the chest strap .............................................................................................10

Heart rate and power values .................................................................................12

Entering personal data...........................................................................................13

Choosing units of measurement...........................................................................14

Group Cycle - Console

DESCRIPTION OF THE BUTTONS

During the warm-up, press this button to start the exercise.

During the exercise, press this button to pause the exercise.

During the exercise or when paused, press and hold this button to end the exercise and view the results.

During the warm-up and during the exercise, press these buttons to scroll through the pages with the workout data.

Press and hold these two buttons simultaneously within a minute of the display turning on to start the Technogym threshold

power test.

No workout must be in progress.

Press this button to connect the chest strap.

Press and hold these two buttons simultaneously within a minute of the display turning on to enter personal data: age, weight

and functional threshold power.

Press and hold these three buttons simultaneously within a minute of the display turning on to choose the units

of measurement: km, kg / miles, lbs.

Group Cycle - Console

DESCRIPTION OF THE DISPLAY

The product is self powered.

Pedal for a few seconds to turn on the display.

To switch o the display, stop pedalling for at least 30 seconds; the product will also switch o if the pedal cadence is below 40 rpm.

The workout values are divided into 4 pages.

At the start of the exercise, the 4 pages are displayed in alternating fashion for around 10 seconds. Then the rst page remains displayed.

Press the arrow buttons to scroll through the pages.

This symbol indicates that the Wi-Fi connection is active.

If the connection is active, it is possible to log in.

This symbol indicates that the user has logged in.

You can log in with the TGS key, or with the mywellness app using NFC,

QR-Code or Bluetooth Smart.

Page 1 Page 2 Page 3 Page 4

Group Cycle - Console

DESCRIPTION OF THE DISPLAY

Page 1 contains the following:

Pedal cadence, expressed in revolutions per minute (rpm).

Instantaneous power, expressed in watts.

Instantaneous heart rate, expressed in beats per minute.

Eort level

Page 2 contains the following:

Pedal cadence, expressed in revolutions per minute (rpm).

Page 3 contains the following:

Average pedal cadence since the start of the exercise, expressed

in revolutions per minute (rpm).

Instantaneous speed, expressed in km/h.

Calorie consumption, expressed in kilocalories.

Distance covered, expressed in kilometres.

Page 4 contains the following:

Maximum pedal cadence reached, expressed in revolutions per

minute (rpm).

Maximum power reached, expressed in watts.

Maximum heart rate reached, expressed in beats per minute.

Calorie consumption, expressed in MOVE.

Ratio between instantaneous power and threshold power,

expressed as percentage of watts.

Ratio between instantaneous heart rate and maximum heart rate,

expressed as a percentage of beats per minute.

Exercise duration in minutes and seconds.

Group Cycle - Console

DESCRIPTION OF THE DISPLAY

The heart rate is displayed only if the chest strap is connected.

The time is displayed only during the exercise, not during the warm-up phase.

The ratio between instantaneous power and threshold power is displayed only if the threshold power is known. The threshold power is calculated with the

Technogym threshold power test.

The ratio between instantaneous heart rate and maximum heart rate is displayed only if the age is known.

Depending on the product setting, the distance and speed values can be displayed in km and km/h, or in mi and mph, on page 3.

If the user has not logged in or entered their weight, the calorie consumption is calculated on the basis of a default 70 kg bodyweight.

Group Cycle - Console

STARTING AN EXERCISE

To switch on the display, pedal for a few seconds at a cadence of at least 40 rpm.

The warm-up phase begins.

The duration is not counted during the warm-up.

Press this button during the warm-up to start an exercise.

When the exercise begins, all values are reset and the calculations start again.

It is possible to connect the chest strap both during the warm-up and the exercise.

If the Wi-Fi connection is active, it is possible to log in: this means that the results will be saved to the personal prole.

Press this button to pause the exercise.

Press and hold this button to stop the exercise.

At the end of the exercise the results are displayed; these are divided across 2

pages.

Press the arrow buttons to scroll through the pages.

Group Cycle - Console

TECHNOGYM THRESHOLD POWER TEST

This test allows you to calculate your threshold power.

If you have also connected a chest strap, the threshold heart rate will also be calculated. To obtain this result, the chest strap must be connected before

starting the test.

Before the test it is advisable to perform a warm-up of at least 20 minutes at increasing levels of intensity.

Press and hold these two buttons simultaneously within a minute of the display turning on to start the power test.

No exercise must be in progress.

After pressing the start button, a 5-second countdown will begin.

The test lasts 20 minutes in total, as described below.

If this is the rst time you are taking the test, or if the test was last taken a long time ago

2 minutes In the rst 2 minutes, adjust the intensity until you nd a level of exertion you perceive as moderate.

Choose a cadence between 70 and 100 rpm and keep it constant.

14 minutes Keep the same cadence and intensity of the previous phase constant.

4 minutes Increase the cadence and intensity to reach your maximum possible level of performance.

Group Cycle - Console

TECHNOGYM THRESHOLD POWER TEST

If you have taken the test recently, and so your threshold power is known

16 minutes Maintain 70% of the threshold power resulting from the last test for the rst 16 minutes.

Choose a cadence between 70 and 100 rpm and keep it constant.

4 minutes Increase the cadence and intensity to reach your maximum possible level of performance.

During the test, the following data are shown on the display:

- Pedal cadence, expressed in revolutions per minute (rpm).

- Instantaneous power, expressed in watts.

- Heart rate, expressed in beats per minute. This value is shown if the chest strap is connected.

- Time remaining to the end of the test, in minutes and seconds.

The test cannot be interrupted for a pause.

At the end of the test it is advisable to cool down for 3 minutes.

At the end of the test, the following data are shown on the display:

- Threshold power, expressed in watts.

- Threshold heart rate, expressed in beats per minute. This value is shown if the chest strap is connected.

If the user has logged in, the results of the test are saved to their personal prole; during subsequent training sessions, the ratio between the instantaneous

power output and threshold power is shown on the display.

Group Cycle - Console

Receiver

USING THE CHEST STRAP

The lower part of the display contains a receiver which receives the heart rate signals from the

telemetric chest strap.

The transmission technology used is Bluetooth Smart.

The connection must be repeated with each workout.

Press this button to connect the chest strap. The chest strap must be less than 30 cm from the receiver.

Keep as close to the receiver as possible for 10 seconds to facilitate the connection.

The heart icon ashes on the display while the connection is being negotiated; then, when the connection has been successfully

established, the icon remains lit and the instantaneous heart rate is displayed.

The heart rate is expressed in beats per minute.

If the AVG (average) symbol is present, this means that the average heart rate since the beginning of the exercixe is being

displayed.

If the MAX symbol is present, this means that the maximum heart rate reached during the exercixe is being displayed.

If the %symbol is present, the value shown indicates the ratio between the measured heart rate and the maximum heart rate.

The user's maximum heart rate (100%) is calculated on the basis of age using the following formula: HRmax = 206.9 - 0.67 x age (R. L. Gelish).

If the user's age has not been entered, the default value of 30 will be used.

Otros manuales para GROUP CYCLE

Tabla de contenidos

Otros manuales de Bicicleta estática de Technogym

Technogym

Technogym New Bike EXCITE Plus Cómo utilizar

Technogym

Technogym Top 600 XTPRO Manual de usuario

Technogym

Technogym Group Cycle D92 Cómo utilizar

Technogym

Technogym BIKE XT Manual de usuario

Technogym

Technogym BIKE EXC 700 LED Manual de usuario

Technogym

Technogym FORMA LINE BIKE FORMA DDC5 Series Manual del propietario

Technogym

Technogym BIKE LIVE Manual de usuario

Technogym

Technogym SKILLBIKE Manual de usuario

Technogym

Technogym BIKE ARTIS Manual de usuario

Technogym

Technogym spin trainer Manual de usuario

Technogym

Technogym Bike Forma Manual de usuario

Technogym

Technogym Recline 600 XTPRO Manual de usuario

Technogym

Technogym Bike MED Manual de usuario

Technogym

Technogym RECLINE EXCITE Manual de usuario

Technogym

Technogym EXCITE BIKE Manual de usuario

Technogym

Technogym GROUP CYCLE Guía de instalación y uso

Technogym

Technogym Bike Excite Live Manual de usuario

Manuales populares de Bicicleta estática de otras marcas

Weslo

Weslo Vector 302 Guía de inicio rápido

TOORX

TOORX BRX85 Manual de usuario

Matrix

Matrix KranKcycle Manual de usuario

Matrix

Matrix IC3 Manual de usuario

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Manual de usuario

Monark

Monark 827E Manual de usuario

Stamina

Stamina 1310 Manual de usuario

American Fitness

American Fitness SPR-BK1072A Manual de usuario

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Manual de usuario

BH FITNESS

BH FITNESS H9158H Manual del operador

Body Sculpture

Body Sculpture BC-7220G Manual de usuario

Cateye

Cateye EC-2300 Manual de usuario

FYTTER

FYTTER RACER RC MSR Manual de usuario

Kikos

Kikos HM-9090M Manual de usuario

Pro-Form

Pro-Form 345 Zlx Bike Guía del usuario

Fuel Fitness

Fuel Fitness SU135-40 Manual de usuario

NordicTrack

NordicTrack Gxr 4.2 Bike Manual de usuario

Vision Fitness

Vision Fitness U70 Manual de usuario