Recording / Save Recording Contents :File Delete : Play / Pause :
Reg. Office : 205, 1B, Varun Arcade, Nr. Lawkim Industries, Ghodbunder Road, Thane, Maharashtra - 400610.
Recording: in any state to push the 'recording' switch, the recorder begins recording, the recording interface will have the appropriate recording tips. Press 'play' (Mode) button to pause or continue recording (In the recording process short press 'play' button to pause recording and press again to continue.) Saving recording: in the state of recording, push the recording switch, the recorder will automatically save the current recording files, saved as REC •.Mp3 (WAV) , press 'play' button to play the current record file. Delete a single file: in the menu of music files or recording files, press the 'V' button to delete file directly. Pres s 'Last' or 'Next" button to select 'delete all' or 'delete', then press 'play' button to confirm, press 'Last' or 'Next" button to select 'Yes' or *No*. Select 'Yes' and press the 'Play' button to confirm delete. Select No and press the "Play' button to exit delete mode. Normally when delete files, please do not shutting forcibly, otherwise, it may cause file corruptedIn the recording playing or music playing mode, press 'Play' button to start playing, press it again to pause. While playing, long press 'M/menu' button to enter the play settings(short press 'M' button can back to previous menu). 1. Press "Play' button to enter the sound setup mode, selected to enter the sound setting (electronic music, classical, jazz, hip hop, funk, rock). 2. In playing mode, long press "M" button to enter the loop mode(including single cycle, all cycle, browse three options can be selected according to the playing confirmation). 3. Press "Play' button to enter variable speed playback mode (In this mode, press the "Play" button to play, regulating + 0 is normal playback; regulating the larger number. the speed faster without tone changed, regulating smaller number, the speed slower without tone changed. slow the speed). 4. Press the 'Play' button to enter repeat settings, there are three options: "repeat mode', 'repeat frequency" and "repeat interval' . 1) :Repeat ModeIn the state of playing, press the 'M" button to enter the playing settings, press"Last" or 'Next' button to select 'repeat menu" and then select "repeat mode', press "Play" button to confirm. Return to the playing interface, you can see the "A-B" at the left bottom and 'A' character is flashing, short press 'Next' to confirm, 'A' character stop flashing, "B' character is flashing, till now the starting time is set. Then click 'Next', 'B" character stop flashing, 'A-B' character is fixed, the ending point is set. The machine playing between 'A' and 'B" repeatedly. It will return to the normal playing state when the playing time reaching the set time, and the icon 'A-B" characters disappear automatically. Technogeek 610 Digital Voice Recorder 3Downloaded from www.Manualslib.com manuals search engine
