Techni-Lux ST-LEDSTROBE60 Manual de usuario

Information specifically for:

ST-LEDSTROBE60 v1.0

This manual contains important information.

Please read before operating fixture.

IMPORTANT INFORMATION

Save original packing and documentation for warranty, service and return issues.

Limited Warranty: This warranty covers defects or malfunctions in this equipment. This warranty lasts for

a period of one year from date of purchase. It is the owner’s responsibility to provide invoices for proof of

purchase, purchase date and dealer or distributor. If purchase date can not be provided, warranty period

will start at manufacture date. It is the sole discretion of Techni-Lux to repair or replace parts or

equipment. All shipping will be paid by purchaser. This warranty does not cover lamps, fuses, belts,

power semiconductors, relays, cleaning, standard maintenance adjustments or normal wear items or any

problem resulting from the following: improper wiring, incorrect voltage (including low or over voltage

conditions and lightning), abuse, misuse, improper maintenance or an act of God or damage resulting

from shipping. Warranty will be null and void if the product is altered, modified, misused, damaged, or

subjected to unauthorized repairs. Lamps are covered by relevant manufacturer warranty. This warranty

gives you specific legal rights, and you may also have other rights which vary from state to state. Any

liability for consequential and incidental damages is expressly disclaimed. No other warranty, expressed

or implied is made. Techni-Lux liability in all events is limited to, and shall not exceed, the purchase

price paid.

Returning equipment and Repairs: All returns must be accompanied by a Return Merchandise

Authorization (RMA) number and sent pre-paid. Contact the dealer or Techni-Lux directly to obtain an

RMA. The RMA number must be clearly listed on the shipping label. Due care must be exercised in

packing all merchandise to be returned. All repairs must be accompanied by a written explanation of the

claimed problem or error encountered. Techni-Lux is solely responsible for determining a product’s

eligibility for coverage under warranty. If returning for consideration of credit, all accessories and

documentation, original protective material and cartons must be included and the equipment, packing

and carton must be in new resalable condition. Credit for returned merchandise will be issued at the

lowest current price and is subject to a restocking fee. No returns accepted on discontinued items.

Techni-Lux is not responsible for merchandise damaged in transit and reserves the right to refuse any

return that is damaged by the carrier, not accompanied by a Return Authorization Number (RMA#) or

sent by freight collect.

Claims: All claims must be made within seven (7) days of receipt of merchandise. Any physical damage

must be reported to carrier upon receipt of merchandise.

Please record the following information for future reference:

Model Number (circle): ST-LEDSTROBE60

Serial Number: ________________________________________

Dealer: ______________________________________________

Date of Purchase: ______________________________________

www.Techni-Lux.com

Table of Contents

Specifications .............................................................................................................................4

Unpacking ...................................................................................................................................5

Power...........................................................................................................................................5

Mounting .....................................................................................................................................6

Basic Reference..........................................................................................................................6

Setup and Operation Modes (LED Segment Display)..............................................................7

Control Panel Menu & Operation Settings ................................................................................7

DMX Operation .........................................................................................................................7

DMX-512 Control.........................................................................................................................8

DMX Data Connection ..............................................................................................................8

Data Terminator........................................................................................................................8

Adapter 5-to-3 pin .....................................................................................................................9

DMX Start Address ...................................................................................................................9

DMX Channel Assignments.....................................................................................................10

2 Channel Mode......................................................................................................................10

Analog Control..........................................................................................................................10

Maintenance..............................................................................................................................11

Accessory Items (sold separately)..........................................................................................11

Troubleshooting .......................................................................................................................12

DMX-512 Background...............................................................................................................12

Specifications

Fixture Overview

6 x 10w White LEDS

Fast strobe action using long last LEDS

Compact and Rugged Housing

Wide angle reflector

Operating modes: DMX, Manual level and flash speed, Sound Active, Master/Slave

DMX control using 2 channels

3 Pin XLR DMX connectors

LED Segment display menu for settings

No thermal down time

Physical

Color Black

Size 15.12” x 5.12” x 4.72”

Weight 3.74 lbs (1.7 kgs)

Housing Material Steel

Environmental

Location Indoor

Max. ambient temperature 113°F (45°C)

Min. distance to flammable surface 3.3ft (1m)

Min. distance to illuminated surface 1ft (0.3m)

Electrical

Voltage Auto Ranging 100 - 250vAC, 50-60Hz

Rated Power 65W

Fuses 2 amp mini size: 5x20mm

Control

Digital Protocol USITT DMX512 (1990)

Channels 2

Data I/O 3 Pin XLR (Cannon)

Analog Input ¼” RTS 0/10v Control

Modes DMX512 or Stand-Alone

Optics

Light Source 6 x 10 watt White Flat LEDS

Beam Angle 120°

Rigging

Orientation Any

Mounting Points Adjustable yoke mounting bracket, with clamp bolt mounting

hole.

Unpacking

Immediately upon receipt, carefully unpack and inspect the fixture to verify that all parts are

present and have been received in good condition. If any parts appear damaged from shipping

or the shipping carton shows signs of mishandling, notify the shipper immediately. Retain

carton and all packing material for inspection. In the event that the merchandise is to be

returned, the original carton and packing must be used. The customer will be billed for a new

carton and packing if merchandise is received without the original carton and packing.

Claims

Physical damage must be reported to the Freight Carrier or Shipping Company upon

receipt of merchandise. Damage incurred in shipping is the responsibility of the Freight

Carrier or Shipping Company. It is the customer’s obligation in the event that

merchandise is received damaged, to notify the Freight Carrier or Shipping Company

immediately. All other claims not related to damage incurred during shipping must be

made to the Dealer or Distributor within 7 days of receiving merchandise.

Returns

Returned merchandise must be in the original packing with a Return Merchandise

Authorization number (RMA) clearly listed on the shipping label. Items sent by Freight

Collect or without a RMA number will be refused. Call your sales person and request a

RMA prior to shipping. Be prepared to provide the model number, serial number and

description of the nature of the return. Shipping damage resulting from inadequate

packaging is the customer’s responsibility. Customer will be charged additional shipping

charges to return products received in non original packing and or cartons.

Power

Do not apply power to the fixture until power source is verified.

For protection against electric shock, fixture must be connected to suitable earth ground.

Make sure fixture is disconnected from power mains before any service.

The mains voltage and frequency of this fixture is automatically set. It may operate on an input

AC voltage ranging from 100 to 250volts, 50/60Hz. The listed power rating is its average

wattage under normal conditions. All fixtures must be powered directly from a switched circuit.

This fixture cannot be run on a rheostat or dimmer circuit even if used solely for a 0% to 100%

switching. Before applying power to a fixture, check that the fixture’s input voltage matches the

power source voltage. Consult a qualified electrician if there are any concerns about proper

connection to power.

Mounting

Always consult a qualified professional when rigging. Consider access for routine maintenance

when selecting a mounting position. This fixture may be mounted in any position provided there

is adequate room for movement and ventilation. Mount the fixture securely using proper

hardware, clamps and a safety cables. This fixture features a mounting bracket that allows

adjustment and positioning when mounted. A mounting hole is provided on each bracket to help

accommodate a clamp. Always keep cords out of the way, thus preventing any trip hazards.

Secure all cables properly. Do not mount where the fixture will be exposed to any water or rain,

high humidity, extreme temperature changes or restricted ventilation. Do not obstruct any vents

or heat-sinking.

Basic Reference

Power Input 3 Pin In/Out Data XLR

Cable Safety Cable Point Connectors

Fuse Holder

Analog ¼” RTS

Segment Display Menu Setting Buttons

Setup and Operation Modes (LED Segment Display)

The following refers to the different modes that are available on this fixture via the LED Control

Panel display. All functions are selectable from the display menu located at the back of the

fixture.

Note: The actual fixture may vary from the illustrations shown in this manual.

Control Panel Menu & Operation Settings

Use the fixture’s Control Panel to access the Control Menu. The MODE Key puts the

fixture in the settings menu itself. Continuing to press the MODE button rotates through

the menu options available. Use the UP/DOWN buttons to adjust any of these settings.

Hitting the MODE again will go to the next menu item. DMX and master/slave modes

require data cables to be connected between fixtures. Manual stand-alone modes do not

require data cables for independent use of the fixture.

Option Function Action

ADD Puts unit in DMX mode and allows setting of

DMX start address. Leave in this mode to

operate using DMX.

Use UP/DOWN to set

address

C-0 Sets the manual output intensity. Leave in

this mode to for this output level to remain

on.

Use UP/DOWN to set from 0

to maximum of 9.

F-0 Set the manual flash speed.

Leave in this mode to flash the output as set

in C-0.

Use UP/DOWN to set flash

speed from 0 to maximum of

S-0 Sets the manual audio sensitivity. Leave in

this mode to flash unit to audio at the level

set in C-0.

Use UP/DOWN to set from 0

to most sensitive of 9.

DMX Operation

The DMX operation mode allows you to control the bar using a standard DMX controller.

In this mode you set the start address at which the fixture will respond to the controller

on. To address simply press the MODE button until the display shows ADD. Set the

desired address using the UP/DOWN buttons. Release at desired start address. Screen

will shut off after 8 seconds. Address is set and unit is in DMX mode.

Note: The following DMX-512 Control section explains how to select a DMX start

address for your fixture. It also covers connecting data cables, proper termination,

specific channel assignments and channel value tables.

DMX-512 Control

Fixtures require a "Start Address" from 1 to 512, setting the first DMX channel containing data

for the fixture (see DMX Background). Before addressing fixtures, consult the manual of the

system’s DMX controller to select a desirable addressing scheme. Valid Start Addresses range

from 1 to 512. Fixtures requiring more than one channel for control will read subsequent

channels up to the total number of channels required. This fixture would require 2 channels of

DMX, if set to a Start Address of 3 it would use data from channels: 3 and 4. Choose a Start

Address so the channels used DO NOT overlap with other fixtures. In some cases, it may be

desirable to set two or more same type fixtures to the same Start Address. In this case, the

fixtures will be slaved together and respond to the same data. Because all fixtures see the

same data, fixtures may be set to any address without concern for the order they are connected

by the DMX cables.

DMX Data Connection

This fixture uses both 3 pin XLR type connectors and shielded twisted pair cable

approved for EIA-422/EIA485 use. Fixtures are connected in Daisy Chain topography:

Connection is made from the controller to the DMX-IN of the first light, then from the

DMX-OUT to the DMX-IN of the next light and so on. Only one data source can be on a

chain and no branching is allowed. The physical order in which the fixtures are

connected is not important, use the most convenient.

Data Terminator

A Data Terminator can be connected to the DMX-OUT of the

last fixture to reduce the effects of signal noise; it is not required

for all installations. To make a Terminator, connect a 120-ohm

¼ watt resistor across pin 2, Data Negative (S-) and pin 3, Data

positive (S+). Whether it is a 5 pin XLR or 3 pin XLR connector

(shown on right) does not matter, the pin numbers remain the

same. A qualified technician can determine if a Data Terminator

is needed.

DMX

- Ground

- Signal (-)

- Signal (+)

XLR Connector - Plug:

DMX-

- Ground

- Signal (-)

- Signal (+)

LR Connector - Socket:

Adapter5-to-3 pin

Systems using 5 pin DMX interfaces can be accommodated by purchasing 3-to-5 pin

adapters or building adapter cables. Numbers designating each pin can be found on

connectors. Converting between the two XLR types is done in a pin-to-pin fashion.

Connect the shields to pin 1, then connect pin 2 to pin 2 and pin 3 to pin 3, regardless of

either connector’s gender or pin count. No connection is made to Pins 4 & 5.

DMX Start Address

To place the fixture in DMX mode, press the MODE key, then using the UP/DOWN keys

get to the Address Menu Option. Press ENTER and using the UP/DOWN buttons, set the

start address number for this particular unit in the DMX chain. Once selected, press

ENTER again to save your selection. More than one fixture may have the same start

address, but they will behave the same. Giving a unique start address that does not

overlap with any other units allows you to individually control that fixture’s features fully.

Never allow channels to overlap. This fixture uses 2 channels. This will determine the

spacing of channels you will need to avoid overlapping of channels when selecting your

start addresses.

Example

Select Start Addresses for 4 fixtures each requiring 2 channels of DMX

For this example, start with the first unit set to the first possible Start Address = 1. This fixture

occupies DMX channels 1 thru 2. The next DMX channel available for a Start Address is found

by adding the previous fixture’s Start Address to its channel requirement: 1+2=3. To maximize

channel usage, we will leave no empty channels between fixtures so the second Start Address is

set to DMX channel 3 and that fixture occupies channels 3 thru 4. The third fixture will be

addressed 3+2=5and occupy channels 5 thru 6. The last fixture is addressed 5+2=7and will

occupy channels 7 thru 8. Thus, 4 fixtures using 2 channels each have Start Addresses of 1, 3, 5

and 7and the next free channel in the system is 7+2=9.

5 Pin XLR (Plug)

Pin 1: GND(Sheild)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pin 4: N/C

Pin 5: N/C

3 XLR (S )

Pin 1: GND(Sheild)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pin ocket

5 Pin XLR (Socket)

Pin 1: GND(Sheild)

Pin 2: Signal(-)

Pin 3: Signal(+)

Pin 4: N/C

Pin 5: N/C

3 XLR (Plug)

Pin 1: GND(Sheild)

Pin 2: Signal(-)

Pin 3: Signal(+)

DMX Channel Assignments

This fixture features a 2 DMX Channel mode.

2 Channel Mode

Analog Control

This fixture has an analog in and pass thru. Use an analog 0/10v output control signal to adjust

the speed of this strobe. In and out connections are made using standard ¼” RTS Stereo plugs.

To use this analog control mode, put the unit in DMX mode.

Channel Function

1 Flashing Strobe (0-255)

2 Intensity UV (0-255)

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de DJ de Techni-Lux

Techni-Lux

Techni-Lux DL-BAR10TC24O/B Manual de usuario

Techni-Lux

Techni-Lux FlexiLED Series Manual de usuario

Techni-Lux

Techni-Lux VectorLED Series DM-VECTORLED712QB Manual de usuario

Techni-Lux

Techni-Lux DL-BAR10C252 Manual de usuario

Techni-Lux

Techni-Lux DL-QUADBAR430TC Manual de usuario

Techni-Lux

Techni-Lux CT-OPERATOR Manual de usuario

Techni-Lux

Techni-Lux DL-FLEXILED3C30/B Manual de usuario

Techni-Lux

Techni-Lux ST-LEDSTROBE330 Manual de usuario

Techni-Lux

Techni-Lux DL-OBAR830TC Manual de usuario

Techni-Lux

Techni-Lux DL-ULTRALUX18VW Manual de usuario

Techni-Lux

Techni-Lux UltraLUX Series Manual de usuario

Techni-Lux

Techni-Lux DL-PAR64TC18/B Manual de usuario

Techni-Lux

Techni-Lux IL-TRACKER575W/1 Manual de usuario

Techni-Lux

Techni-Lux Bank Light 4 Manual de usuario

Techni-Lux

Techni-Lux SE-SNOW1 Manual de usuario

Techni-Lux

Techni-Lux VectorLED 160 Spot Manual de usuario

Techni-Lux

Techni-Lux DL-PANEL1-192U Manual de usuario

Techni-Lux

Techni-Lux DL-BAR10C5MM Manual de usuario

Techni-Lux

Techni-Lux LEDifice Series Manual de usuario

Techni-Lux

Techni-Lux Pro Series Tracker SPOT250 Manual de usuario

Techni-Lux

Techni-Lux DL-FLEXILED1C30/B Manual de usuario

Techni-Lux

Techni-Lux DL-LEDPANEL36C/B Manual de usuario

Techni-Lux

Techni-Lux DL-BAR10UV365 Manual de usuario

Techni-Lux

Techni-Lux DL-LEDPAR1C36O/B Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario