Tech4Pets T4P-TRTPOOPER Manual de usuario
Smart Treat Dispenser
T4P-TRTPOOPER
User Manual
SPK-ST40-972
Thank you
for your purchase!
Laser Corporation is 100% Australian owned &
operated. To get the most out of your product
please read the user manual carefully and keep
for future use.
For specific information relating to your product
such as Spare Parts, FAQs, Warranty claims, and
more, please scan the following QR code:
WHAT’S IN THE BOX
• Smart Treat Dispenser
• USB Cable
• Power Adapter
• User Manual
App: Laser SmartHome
Software Requirements: iOS 7.0 or Android 5.0
and higher
Video Resolution: 1080p
Food Size: 2 – 10mm
(dry food only)
Wireless Technology:
Input:
Output:
Wi-Fi 2.4GHz
(5GHz not supported)
100 - 240V,
50Hz/60Hz, 0.4A
5V/1A
Camera: 130° Wide Angle
with Night Vision
Food Bin Capacity: 500g
Dimensions:
Weight:
132 x 130 x 254mm
1.1kg
SPECIFICATIONS
PRODUCT DIAGRAM
Lid
(insert treats here)
1
Camera
2
Microphone
Setup
& Manual
Treat Button
3
5
Indicator
Light
4
Treat
Outlet
6
USB Power
7
INDICATOR
LIGHT STATE
• Slow blinking
GREEN light
-AP Pairing Mode.
• Solid GREEN
light
• Slow blinking
RED light
- Device is ON and network
connected.
- No treats in the bucket or
dispenser is blocked.
-EZ or QR Code Pairing Mode.
• Fast blinking
GREEN light
BUTTON CONTROLS
• Tap the “Setup & Manual Treat Button” to
manually dispense treat (no need to connect to
the App).
• Press and hold the button for 8 seconds to reset
the device and put into network pairing mode.
Note: In this manual we cover the QR pairing
mode instructions.
• Fast Flashing = EZ pairing mode.
• Slow Flashing = AP pairing mode.
There are 2 flashing states
GETTING STARTED
WITH THE APP
1. Install the Laser SmartHome
App for your Smartphone from
the iOS App Store or
Google Play Store.
2. Log in with an existing
Laser SmartHome account
or create a new account.
CONNECTING
TO THE APP
1. Press and hold the
“Setup & Manual Treat Button”
on the Treat Dispenser for
8 seconds till you get a fast-flashing
Green light.
If the light is flashing
slowly, press and hold the button
again till you get the fast-flashing
version.
2. Open the Laser SmartHome
App and tap the “+” icon to
add a device.
CONNECTING
TO THE APP
continued...
3. Select the
“Small Home Appliances”
category on the left then select
“Pet Feeder with Camera
(Wi-Fi)”.
4. Enter your Wi-Fi details
1
2
Otros manuales para T4P-TRTPOOPER
1
Tabla de contenidos
