Tech1 VERSA PATROL Manual de usuario
VERSA PATROL SERVICE MANUAL
0
VERSA PATROL SERVICE MANUAL
Contents
1. Foreword.............................................................................................................................................23
2. Document Revision.............................................................................................................................34
3. Radio Information...............................................................................................................................45
4. Package Layout ...................................................................................................................................46
4.1 Box Dimension ............................................................................................................................46
4.2 Box Layout...................................................................................................................................47
5. Parts of the Radio................................................................................................................................48
6. Initial Assembly and Preparation........................................................................................................49
6.1 Charging ......................................................................................................................................49
6.2 Battery Pack ..............................................................................................................................510
6.3 Antenna.....................................................................................................................................611
6.4 Belt Clip.....................................................................................................................................711
6.5 Earpiece (Optional) ...................................................................................................................712
7. Basic Operation.................................................................................................................................913
7.1 Power on and Adjust volume knob...........................................................................................913
7.2 Channel selector knob ..............................................................................................................913
7.3 PTT button...............................................................................................................................1014
7.4 Monitor button .......................................................................................................................1014
8. Features ..........................................................................................................................................1115
8.1 Voice Prompt ..........................................................................................................................1115
8.2 CTCSS/DCS...............................................................................................................................1115
8.3 Channel Scan...........................................................................................................................1115
8.4 Time-Out-Timer (TOT).............................................................................................................1115
8.5 Low Power Alarm....................................................................................................................1115
8.6 Squelch Level Adjustment.......................................................................................................1115
8.7 High/Low Power Selection......................................................................................................1115
VERSA PATROL SERVICE MANUAL
1
8.8 Wireless cloning..........................................................................................................................11
8.9 Cable cloning...............................................................................................................................11
8.10 VOX Function ..............................................................................................................................11
8.11 Emergency Alarm........................................................................................................................11
8.12 Channel Keylock..........................................................................................................................11
8.13 Dual Watch Operation ................................................................................................................11
9. Radio Assembly and Disassembly.......................................................................................................12
9.1 Assembly and Disassembly .........................................................................................................12
9.2 Exploded View............................................................................................................................. 18
10. Quality Check ..................................................................................................................................19
10.1 Physical Appearance ...................................................................................................................19
10.2 RF Testing....................................................................................................................................19
10.3 Battery and Charger....................................................................................................................19
10.4 Radio Check.................................................................................................................................19
11. Schematic Diagram .........................................................................................................................20
12. Block Diagram .................................................................................................................................22
10.1 Front Board .....................................................................................................................................22
10.2 Back Board ......................................................................................................................................23
13. Troubleshooting and Repair..................................................................................................................23
13.1 External Parts..................................................................................................................................23
13.2 Internal Parts...................................................................................................................................24
14. Reprogramming ....................................................................................................................................25
14.1. Initial Setup ....................................................................................................................................25
14.1.1. General Requirements............................................................................................................25
14.1.2. How to install Quicktalk Pro programming software..............................................................25
14.1.3. Install Prolific USB to Serial Comm Port..................................................................................28
14.2. Radio Programming .......................................................................................................................30
VERSA PATROL SERVICE MANUAL
2
1. Foreword
SCOPE OF THIS MANUAL
This manual is intended for use by experienced technicians
familiar with similar types of commercial grade communications
equipment. It contains all the required service information for the
equipment and current released data.
NOTE BEFORE USING
-DO NOT transmit until all RF connectors are verified secure and
any open connectors are properly terminated.
-SHUT OFF and DO NOT operate this equipment near electric
detonator caps or in an explosive atmosphere.
-This equipment should be serviced by a qualified technician
only.
VERSA PATROL SERVICE MANUAL
3
2. Document Revision
DOCUMENTED BY
DESCRIPTION
DATE
Winston Yves L. Esguerra
Initial Release
December 2019
VERSA PATROL SERVICE MANUAL
4
3. Radio Information
4. Package Layout
4.1 Box Dimension
4.2 Box Layout
5. Parts of the Radio
6. Initial Assembly and Preparation
6.1 Charging
Before charging the battery, make sure that the transceiver has been turned OFF. To charge
the battery, plug in to AC outlet (110-240Vac) and insert the bottom of the battery into the
charger. Red LED light on the charger indicates that the battery is charging. Green LED light
indicates that the battery is fully charged. The battery reaches its maximum capacity after 2 to 3
charging cycles.
VERSA PATROL SERVICE MANUAL
5
-Connect adaptor to charger then plug in to AC outlet 100V-240VAC
-Insert battery to the charger. 2 ways of charging,with transceiver or battery only.
Note: The battery may be charged either attached or removed from the transceiver. Never charge
the battery at temperature below -10°C (14°F) or above 35°C (95°F).
6.2 Battery Pack
To Attach: Fit the battery at the back of the transceiver and slide the battery. Click sound
indicates that the battery is locked.
VERSA PATROL SERVICE MANUAL
6
To Remove: Make sure the radio is turned OFF. Press down the battery latch at the bottom of
the transceiver then pull the battery.
6.3 Antenna
Connect the antenna to the antenna connector then turn the antenna clockwise to install and
turn counterclockwise to remove antenna.
VERSA PATROL SERVICE MANUAL
7
6.4 Belt Clip
Fit the belt clip at the back of the transceiver. Screw the belt clip.
6.5 Earpiece (Optional)
Open the earmic cover located at the left side of the transceiver.
VERSA PATROL SERVICE MANUAL
8
Connect Earpiece.
VERSA PATROL SERVICE MANUAL
9
7. Basic Operation
7.1 Power on and Adjust volume knob
- Turn the Power/ Volume knob clockwise. Beep sound indicates that the power is on.
- To adjust the sound, Press MON and rotate the Power/ Volume to desired level.
7.2 Channel selector knob
- Press Up and Down button to choose desired channel. Up to 99 Channels.
Commented [MSG1]: Please show where MON is.
Tabla de contenidos
