Tech Video System TVS32 Manual de usuario

LCD COLOR MONITOR

USER MANUAL

26" / 32" / 42"

Table Of Content

IMPORTANT SAFETY INSTRUCTIONS……………………….4

FCC Regulation CLASS B COMPUTING statement………..5

CHAPTER 1 INTRODUCTION…………………………………...6

1.1 Product Description…..………………………………………….………..6

1.2 Product Features……………………………………...………….……….6

1.3 Package Contents………………………………………………......…….6

1.4 Product Care………………………………………………………..……..7

1.5 Product Dimension…………………………………...……………...……8

1.6 The length of the joint screw……………………………………..……..9

1.7 Installing the base stand…………………………...……………...……9

1.8 Caution…………………………………………………………………....10

CHAPTER 2 OPERATION INSTRUCTION…………...…...….12

2.1 Control Panel……………………………………………….…...12

2.2 OSD Menu……….…………………..…………………………...………13

2.3 OSD Function Table.….…………………………………………...…....15

2.4 Input Signal Icon…………………...…………………………..…..……17

2.5 Hot Key Icon…...………………………………………………………17

2.6 Remote Controller…………………………………………………....18

CHAPTER 3 SIGNAL CONNECTOR AND INSTRUCTION…19

CHAPTER 4 PRODUCT SPECIFICATION…………..…….…21

CHAPTER 5 PANEL SPECIFICATION………………….…..24

CHAPTER 6 WARRANTY………………………….……….…..24

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for a long period of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is damaged,

liquid has been spilled or objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has been dropped.

14. WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to

rain or moisture.

15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.

FCC Regulation CLASS B COMPUTING statement

This equipment has been tested and found to comply with the limits for a class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction, may cause

harmful interference to radio communications. However, there is no guaranty that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by on or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

● Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that

may cause undesired operation.

CAUTION :

Any changes or modifications not expressly approved by the grantee off this device

could void the user’s authority to operate the equipment. (FOR FCC MODEL ONLY)

CHAPTER 1 INTRODUCTION

Thank you for choosing our new generation LCD monitor. This lightweight, slim

design LCD monitor includes many outstanding features and combines the benefit

of a high resolution display. Your LCD monitor is safe to use and completely free

from any X-ray radiation. We hope you enjoy using our product, and would like to

provide the following additional information to assist you in obtaining the best

results, using the product safely and in complete comfort.

Please followALL instructions and cautions carefully before using this product. And

keep this user manual carefully for future reference.

1.1 Product Description

This product uses 26" / 32" / 42" color active matrix TFT (thin-film transistor) monitor,

providing high quality displayed images. The maximum supported resolution is

1366 x 768, which enables the display of complex and high quality images. In

addition, the monitor also provides access to the new OSD (On Screen Display)

controls and has built in multi-media speakers. It is the option of the DVI and

component terminal, and it depends on the model name.

1.2 Product Features

1. High contrast color TFT LCD monitor, supports VGA / DVI signal input up to

resolution 1366 x 768, video signal resolution up to resolution both 500TVL.

2. Imbedded video signal BNC terminal and S-Video terminal and component

signal RCA terminal and Audio signal RCA Jack.

3. A complete OSD function optimizes the screen display.

1.3 Package Contents

Standard package includes the following :

1. 26" / 32" / 42" TFT LCD Monitor. (Depend on the screen diagonal)

2. Remote Controller.

3. Signal Cable. (VGA Cable)

4. User Manual.

5. DVI-I Cable.【Option】

6. Y Cb Cr Cable.【Option】

7. HDMI Cable.【Option】

8. Support stand.【Option】

1.4 Product Care

1. To remove dust or dirt from the screen, use a soft clean cotton cloth and wipe

gently.

2. Do not apply pressure to the screen surface while wiping.

3. Do not use any water or chemical detergent to clean the surface. Chemicals

detergent may damage the surface of the LCD.

1.5 Product Dimension

●26"

UNIT :mm

●32"

UNIT :mm

●42"

UNIT :mm

POWER

MODE

AUTO

ACIN BNC1

IN OUT IN OUT

BNC2 Y I N CbIN CrIN AUDIO1

OUTIN

AUDIO 2

IN OUT

HDMI

DVI

INVGA

OUTIN

Y/C

POWER

MODE

AUTO

BNC1

IN OUT

BNC2

IN OUT

YIN CbIN CrIN AUDIO1 A UDIO 2

IN OUTOUT

HDMI

DVI

VGAIN

OUTIN

Y/C

ACIN

Y/C

IN OUT

HDMI

DVI

VGAIN

OUTIN

AUDIO2AUDIO1

IN OUT

CrINCbINYINBNC2

OUTININ OUT

BNC1

ACIN

AUTO

MODE

POWER

1.6 The length of the joint screw

1.7 Installing the base stand

oint rac

rear cove

The len

th of insert screw :4mm<L<7mm

ort stan

1.8 Caution

● PRODUCT

1. Do not cover or block the ventilation holes in the back of the monitor case.

2. Do not insert any metal objects into the ventilation holes of the monitor case

and be careful not to spill liquids over this product as this could result in

severe injury.

3. Unplug the monitor’s power cable if not to be used for a long period of time.

4. Do not attempt to dismantle this product. Any attempt to dismantle or remove

the covers from this product will invalidate the warranty and may also result in

serious injury.

5. Do not touch the screen directly with fingers. The oils from your skin may

leave marks on the surface of the screen, which are difficult to be removed

and may damage the screen permanently.

6. Do not apply pressure to the LCD screen. The LCD is very delicate and fragile

component.

7. When mounting on the wall, for safety concern, please use the supporting

parts in the packing.

● MAINS PLUG (2Pin / 3Pin)

1. Do not remove the grounding or earth connection from the power supply /

mains plug.

2. Always remember to unplug the LCD Monitor from the power supply under the

following circumstances :

※If the monitor will not be used for a long period of time.

※If the power supply cable or plug / connector is damaged.

(Please refer to the " User Manual " when connecting and disconnecting the LCD

Monitor from any power supply or other systems and before making any adjustments

to the Monitor. In the event of any unexpected situation occurring whilst operating the

Monitor please switch off the power supply and remove the power cable. If the

problem is not explained in the User Manual, please contact your local dealer or our

customer service department.)

※If the monitor housing is damaged or broken.

●POWER CORD AND SIGNAL CABLE

1. Do not put anything on the power cord or signal cable.

2. Do not allow any cables from the monitor to lie on the floor in an area where

pedestrians are likely to trip causing injury.

3. This product is supplied with a 3 line-grounding plug. The grounding plug

provides an additional safety feature for anyone using this equipment and

should not be removed. Please contact a qualified electrician for assistance if

the grounding plug and electrical connections appear to differ from the local

supply provided. Do NOT throw this safety-grounding plug.

4. Do not overload the power cord or adapter.

5. Do not put the power cord or signal cable in humid places.

● ALLOCATION ENVIRONMENT

1. DO NOT place this product on any unstable trolleys, shelves or tables as it

may fall and cause severe injury and damage.

2. Always ensure that the monitor is located in a well-ventilated area to prevent

the unit from overheating.

3. AVOID operating or placing the monitor in the following environments :

※Extremes of temperatures, both hot and cold.

※High Humidity.

※Direct sunlight.

※Excessively Dusty Surroundings.

※Avoid close proximity to other equipment that generate a strong magnetic

field.

CHAPTER 2 OPERATION INSTRUCTION

2.1 Control Panel

1. Power Switch : press to switch monitor on / off.

2. Mode : press to select input signal. (see ※Remark)

3. Auto : VGA signal auto adjustment.

4. Plus (+) : press to increase the value of OSD option selected; press to increase

volume.

5. Minus (-) : press to decrease the value of OSD option selected; press to

decrease volume.

6. Up (Contrast) : select OSD options upwards; press to adjust contrast.

7. Down (Brightness) : select OSD options downwards; press to adjust brightness.

8. Menu : recall or close OSD display, enter or return selection.

※Remark :

On the first press, the monitor shows OSD of the current signal. Before OSD

disappears, press again to change Mode.

AUTO

MODE

POWER

MODE

AUTO

2.2 OSD Menu

●VGA / DVI/ HDMI Signal

1. ※Item 3,4,5,6 have different value after auto tuning, but DVI can’t adjust.

Above Value / data is for reference only.

1. Brightness 50

2. Contrast 60

3. H-Position 50

4. V-Position 39

5. Clock 50

6. Phase 87

7. Color Temp. User Color

8. User Color R 50

9. User Color G 50

10. User Color B 50

11. Osd H-Pos. 50

12. Osd V-Pos. 50

13. Volume 50

14. PIP/POP Off

15. SUB SOURCE Composite 1

16. PIP SIZE Large

17. PIP H-POS. 0

18. PIP V-POS. 0

19. SOURCE SWAP

20. Language English

21. Recall

※

●VIDEO (Composite / S-Video / Component) Signal

1. ※The Color Temp. depends on the region.

Above Value / data is for reference only.

1. Color 60

2. Tint 50

3. Brightness 55

4. Contrast 63

5. Sharpness 19

6. Volume 50

7. H-Position 50

8. Language English

9. Color Temp. Standard

10. Scan Over

11. PIP/POP Off

12. SUB SOURCE Y Cb Cr

13. PIP SIZE LARGE

14. PIP H-POS. 0

15. PIP V-POS. 0

16. Source Swap

17. Recall

※

2.3 OSD Function Table

●VGA / DVI/HDMI

1. Brightness Adjust back ground black level of the screen image.

2. Contrast Adjust fore ground white level of the screen image.

3. H-Position Adjust the left or right position of the screen image.

4. V-Position Adjust the up or down position of the screen image.

5. Clock Adjust the horizontal sync width of the screen image.

6. Phase Adjust the clarity of the screen image.

7. Color Temp. Press (+) or (-) to choose three types of color temperature 9300°K , 6500°K ,

User Color.

8. User Color R Adjust the red color’s intensity of the screen image.

9. User Color G Adjust the green color’s intensity of the screen image.

10. User Color B Adjust the blue color’s intensity of the screen image.

11. OSD H-Pos. Adjust the left or right position of the OSD.

12. OSD V-Pos. Adjust the up or down position of the OSD.

13. Volume Adjust the volume control.

14. PIP/POP View the video input screen image on the left-top screen. Press (+) or (-) to

choose three types of PIP/POP : S-Video , Video 1 , Video 2 .

15. SUB SOURCE Choose the source of the sub picture.

16. PIP SIZE Choose the size of the sub picture.

17. PIP H-POS. Adjust the left or right position of the sub picture.

18. PIP V-POS. Adjust the up or down position of the sub picture.

19. SOURCE SWAP Swap the picture in picture.

20. Language Select languages : English, Chinese, French, German, Spanish, Italian or

Japanese.

21. Recall Press (+) or (-) recall the default value.

●VIDEO (Composite / S-Video / Component)

1. Color Adjust the color density.

2. Tint Adjust the color tint. (NTSC only)

3. Brightness Adjust back ground black level of the screen image.

4. Contrast Adjust fore ground white level of the screen image.

5. Sharpness Adjust the clarity and focus of the screen image.

6. Volume Adjust the volume control.

7. H-Position Adjust the left or right position of the screen image.

8. Language Select languages : English, Chinese, French, German, Spanish, Italian or

Japanese.

9. Color Temp. Press (+) or (-) to choose three types of color temperature 9300°K , 6500°K ,

Standard.

10. Scan Press (+) or (-) to choose four type of over scan or under scan or full scan or

1 : 1 scan.

11. PIP/POP View the video input screen image on the left-top screen. Press (+) or (-) to

choose three types of PIP : VGA, DVI, Y Cb Cr.

12. SUB SOURCE Choose the source of the sub picture.

13. PIP SIZE Choose the size of the sub picture.

14. PIP H-POS. Adjust the left or right position of the sub picture.

15. PIP V-POS. Adjust the up or down position of the sub picture.

16. SOURCE SWAP Swap the picture in picture.

17. Recall Press (+) or (-) recall the default value.

2.4 Input Signal Icon

2.5 Hot Key Icon

VGA Signal

DVI Signal

Composite Signal

S-VIDEO Signal

Component Signal

HDMI Signal

Volume Adjustment

Contrast Adjustment

Brightness Adjustment

2.6 Remote Controller

1. Power Switch : press to switch monitor on / off.

2.MUTE :N/A.

3. Plus (+) : press to increase volume; press to increase the value of OSD option

selected.

4. Minus (-) : press to decrease volume; press to decrease the value of OSD option

selected.

5. Up : select OSD options upwards.

6. Down : select OSD options downwards.

7. Menu : recall or close OSD display, enter or return selection.

8. ESC : escape from selection.

9. INPUT : select VGA、DVI（HDMI）、BNC1、BNC2、Y/C、Y Cb Cr.

CH+

CH-

VOL+VOL-

ESC INPUT

AUTO

DISPLAY

RETURN

MUTEPOWER

-/--09

8765

4321

CHAPTER 3 SIGNAL CONNECTOR AND INSTRUCTION

Input / Output Interface

1. AC In : Connect the AC power cord to the AC input connector and wall outlet.

2. Y/C In / Out (4-Pin mini-Din) : connect to the Y/C output / input terminal of camera

VCR or other video equipment.

3. VGA In : connect analog R.G.B output terminal, such as the display card output

VGA terminal of the personal computer.

4. DVI In : connect digital R.G.B output terminal, such as the display card output

DVI terminal of the personal computer.【OPTION】

5. HDMI In: connect High Definition Multimedia output terminal, such as DVD.【OPTION】

6. Audio In / Out (RCA Jack) : audio input / output terminal.

7. Y Cb Cr In (RCA Jack) : connect to the component output terminal of video

equipment, such as DVD.【OPTION】

8. VIDEO In / Out (BNC-TYPE) : connect to the output / input terminal of video

equipment, such as a VCR or a color video camera.

9. When you choose a video signal screen without connecting any video signal,

" No Signal " will be showed on the screen. During the time playing the video,

and remove the video signal, " Video Loss " will be showed on the screen. It’s

same of other channel.

Y/C

IN OUT

VGA IN IN

DVI

HDMI

OUT

AUDIO2

IN OUT

AUDIO1Cr INCb IN

Y INBNC 2

OUTINOUTIN

BNC 1

ACIN

OUT

AUDIO 2AUDIO 2

OUT

AUDIO 1

OUT

BNC 2

OUT

BNC 1

786

543

AC IN

OUT

IN IN

HDMI

VGA

DVI

Y/C Y/C

Cr IN

Cb IN

Y IN

Note :

※It takes about 4~ 5 seconds to change Mode.

※When Mode is changed, the monitor will shows blue screen, then enter Signal

Input or shows " NO Signal ".

Caution :

AVOID directly pulling any cables when disconnecting devices from the monitor.

Always disconnect devices carefully by firmly gripping the metal or plastic

connector body and gently easing the connector from its socket.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación