Tecell Elektronik HC-200 Hyperview Manual de usuario
Hyperview Cam HC-200
User Manual
www.hyperviewcam.com (English)
www.hyperviewcam.de (Deutsch)
Tecell Elektronik
Ver. 2016/06/10
Thank you for purchasing HyperviewCam HC-200.
This manual contains important safety information, product description and instructions to use HC-200
The latest version of this guide can be downloaded from the website www.hyperviewcam.de
Before using the product, please read the contents of this manual!
Technical or editorial errors and improvements are possible.
The product and its properties can be modified to the user without prior notice at any time.
Warranty and Support
The webpage and call center address information: http://www.hyperviewcam.com
User can also download the most actual information from this website.
HyperviewCam camera is provided with 2 years warranty.
Copyright and Trademark
This document is protected by copyright and all rights are protected by law.
Any part of this document without the prior written consent of us cannot be duplicated, copied, modified, and
translated except for the case of permitting by the Copyright.
Input: 13,8-12V DC
10R-04.1382
Content
1 Safety and Precautions
2 Included components
3 Optional Components
4 Camera components
5 Installation
6 Configuration commands
7 Configuration of the camera - manually
8 Configuration application
9 Operation
10 Camera modes
11 Export of live videos
12 Memory capacity
13 Playing of individual video files
14 VideoStitcher: Player mode
15 VideoStitcher: Recovery of defective Videos
16 VideoStitcher: Stitcher mode
17 VideoStitcher: Usage
18 VideoStitcher: Optimization of calibration parameters
19 Specifications
If you do not comply with the following contents,
it may cause damage to the user.
Warning
•Do not install camera at the places with high humidity
or highly flammable liquid or gas. Explosion or fire may
be caused.
•Do not keep camera inside of a vehicle under direct
sunlight and expose it to high temperatures. This can be
the cause of a fire or malfunction.
•Install the camera so that it does not obstruct the
driver's vision. Viewing disability may cause serious
accidents, injuries and damage.
•We recommend to install camera so, that it see
through area cleaned by wipers.
•Plug in the cables into camera and car correctly. Otherwise,
fire or malfunction may occur.
Use
Keep away from highly flammable and explosive gases and liquids.
This may cause an explosion or fire sit up.
Do not insert metal or flammable substances at the slot of memory
card or the code. Electric shock or fire may be caused.
Do not operate with wet hands. This may cause an electric shock.
Do not leave the products and accessories around babies and children.
Swallow small accessories can cause serious injury or even death.
Do not cover the operating product with a cloth. By heating, a fire or a
camera or microSD card malfunction may occur.
Power
Power supply
Installation
Installation
Usage 1
1 Safety and Precautions (1/2)
If you do not comply to following content, it may
cause damage to users and goods!
Warning
•Do not use damaged or not-original power cable.
Damage of the product and car may occur.
•Operate the camera only with for the camera
suitable voltage (11,2-13,8V DC).
•This camera is not an outdoor device. It is developed for
installation and use in interior only.
•Leave the installation of permanent power to
professional electrician, to avoid damage of car and
camera.
Do not place operating camera on some surface nor cover with the
cloth. It will prevent camera cooling by natural air flow through
camera. Then camera damage or burn may occur.
•We continuously improve our products and documentation and
reserve the right to do substantive changes to the documentation,
camera and accessories software and hardware without prior
nottice.
•Most actual version of this user instructions can be found on our
website: http://www.hyperviewcam.com
•Tecell Elektronik GmbH assumes no responsibility for the accuracy of
the content or for any damages arising from the use of the camera
and the user manual.
•We are grateful for your hints to eventual mistakes or for
suggestions for improvement in order to offer you in the future
better performance of our products.
•You can contact us via email: support (at) tecell.at
•Do not disassemble the camera and modify anything. If you have
problems please contact our support or send the camera to an
authorized repair center.
•Do not leave or place the product and accessories near animals.
Explosion or malfunction may occur due to damage caused by
animals.
•When not using the product for an longer period, remove the
power cord, otherwise fire or malfunction could occur.
•Do not move the camera while it is connected to the cigarette
lighter or the power cord. This might cause fire or electric shock.
•Do not configure and control the camera during driving. It can
cause accidents.
Usage 2
Nottice!
1 Safety and Precautions (2/2)
.
2 Provided Components and Parts
Components
1) Holder with self adhesive tape
2) Hyperview Cam HC-200
3) Video output cable
(3m long) 4) Power Cable
(3m long)
※Product’s components can be changed for enhancement the
quality and functions without prior notice.
6) MicroSD card Adapter
7) MicroSD card
8) Printed user manual (DE)
5) Mini CD incl.:
- Hyperviewcam VideoStitcher/Player
- Setup Programm
- User manual (EN and DE)
SD-Card to USB Adapter Video-Ausgangskabel
(4-pole-RCA) GPS-Receiver
Optional parts you can purchase from your HypervievCam supplier or www.hyperviewcam.com
3 Optional Components
Short press: Manual Recording Video
Long press: Camera Power ON / OFF
5 Power connector (DC 13,8-12V)
Connect the power cable.
(Car Cigarette lighter Socket)
6 External TV/Monitor output
Use provided monitor
cable to see live videos
on external device
7 GPS slot
Connect optional HC-200
GPS receiver into this slot.
Soundspeaker
camera voice informs about camera
status
Function Buttons
Short: MIC REC ON / OFF
Long: Voice (beep) ON / OFF
Short: Manual recording
Long: Parking mode entry / release
Long: SD FORMAT entry
Big Blue Button1
1
234
2
3
4
765
Two HD - Cameras
For two synchronised Video channels
(left and right channel)
4 Camera
Cooling Grille
This grid allows natural air circulation and
cooling of the camera and
should never be covered or the airflow must not
be prevented!
Identify appropriate place for the camera Insert the MicroSD card into camera
Nottice by wipers cleaned area!
Camera should not obstruct driver view!
Camera can be mounted hanging on windshield
or reversely on armature.
Insert micro SD card always with the gold color contacts
facing down, towards “SD CARD IN”!
5 Installation (1/2)
●In most cases is the best place behind the mirror in
area cleaned by wipers.
Join the camera and the holder.
Notice by wipers cleaned area on the
windscreen. Find a suitable location for
the camera, probably behind the mirror.
Remove the protective strip
from the adhesive foil and attach the
bracket with the camera on 2.1 the
windscreen or 2.2 inversely on the armature.
Insert the power
cable jack
into camera.
Optionally you can connect
With provided TV cable also
external monitor to see
Videos* live.
*With the command tvout:x; //x: 0, 1 (wide,
narrow) you can set how wide will be video
provided on Tvout slot
2.1 Mount
camera
hanging
or inversely,
2.2 staying
5 Installation (2/2)
*) When using the camera with empty internal battery, internal camera battery needs about 1
hour of camera operation to be sufficiently charged, to enable camera to properly close actual
video, when sudden power interupption occur,.
Insert cigarette lighter jack into
cigarette lighter slot.
Camera recognise quick increase of
voltage and turns On automatically.
Camera records video when camera
voice says “Normal recording” or
“Normal mode” enabled“.
The camera battery is charged* if after
the power interruption, the camera
voice says: "Because of instable power
supply the camera shuts down."
Tabla de contenidos
