ThermalCapture IRnet – User Manual
1 Overview and Features
This guide describes the features of TeAx ThermalCapture IRnet.
The declaration of Conformity for this model can be found here: http://www.thermal-capture.com/
Before you can use ThermalCaptureIRnet the first time, take some time to learn more about the
product and needed steps to a setup tailored to your needs.
Being designed for FLIR Tau 2 and FLIR Vue Pro / R cores, ThermalCapture IRnet brings real-time
access in drone flight operations to thermal imaging data. However, next to real-time access, it also
stores the full 14bit radiometric thermal data on a microSD card. Real-time access remains
available whilst radiometric data are being recorded to the microSD card and operators can also
control the camera and settings via Ethernet
1.1 Intended Use
•It is under the responsibility of the user to ensure, that during use as a surveillance camera
no personal rights of third parties are violated.
•The camera is designed for use in private and commercial areas.
1.2 Scope of Delivery
•ThermalCapture IRnet
•SDHC Memory card (32GB
•User Guide (pdf
1.3 Quic overview TOP USPs
•H.264 live (real-time streaming via Ethernet
•Radiometric thermal data recorder (storage to microSD
•Controllable camera settings via network in real time
•Provides access to recordings via network – even during recording process
•Thermal digital zoom during live streaming
•Compatible with FLIR Tau 2, FLIR Vue Pro / R
•Most lightweight and smallest solution in the drone market
3 / 8
