Team Orion dDrive Manual de usuario
INSTRUCTION MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
2 Copyright Team Orion © 2015
CONNECTIONS
1) Battery
2) Servo
3) Receiver
4) Switch
5) Vortex dDrive
6) Battery Connector
1
56
3
2
4
SET
ON/OFF
www.teamorion.com 3
CALIBRATION STEP 1
1
3
2
LED
ON/OFF
Press and
hold the
SET button
Switch ON Keep
pressing
the SET
button
Release as
soon as soon as
the red LED
starts to blink
LED
1 2
LED LED
3
Press
once Press
once Press
once
CALIBRATION STEP 2
4 Copyright Team Orion © 2015
PROGRAMMING YOUR ESC
2 2
33 3
1
7
4
6
5
Connect the battery
Enter Program Mode
Choose the parameter you want to change
OR Reset all programmable items
Press the
SET button
for 1s
Press the
SET button
for 5s
Press the SET button
1 time to select the
1st parameter...
...press the SET button
2 times to select the
2nd parameter etc.
Switch ON
Switch OFF
ESC to complete
the procedure
LED blinks 1 time
LED blinks
1 time
LED blinks 2 times
LED
blinks
Press the SET button
for 3s to modify
the setting of the
parameter
Press the SET button
for 3s to save the
new setting
Use the SET button
to change the setting
of the parameter.
Press 1 time
LED blinks
2 times
Press 2 times etc.
www.teamorion.com 5
AVAILABLE AND DEFAULT SETTINGS
Parameter
Setting
123456789
1. Running Mode Forward
with
Brake
Forward/
Reverse
with
Brake
2. Low Voltage
Cut-Off Threshold
No
Cut-Off 2.6V/Cell 2.8V/Cell 3.0V/Cell 3.2V/Cell 3.4V/Cell
3. Start Mode(Punch) Level1 Level2 Level3 Level4
4. Max Brake Force 25% 50% 75% 100%
More information on page 11-12-13
6 Copyright Team Orion © 2015
Thank you for purchasing a Team Orion dDrive brushless
power unit. This unique system combines the brushless
motor and ESC inside a single aluminum case. Please read
these instructions thoroughly before using your dDrive.
WARNINGS
Read the ENTIRE instruction manual to become familiar
with the features of the product before operating. This
is a sophisticated hobby product. It must be operated
with caution and common sense and requires some basic
mechanical ability. This product is not intended for use by
children without direct adult supervision. Do not attempt
disassembly, use with incompatible components or augment
product in any way. This manual contains instructions for
safety, operation and maintenance. It is essential to read
and follow all the instructions and warnings in the manual,
prior to assembly, setup or use, in order to operate correctly
and avoid damage or serious injury.
• Use extra caution in case of water exposure
• Always use only compatible batteries.
• Always power o the dDrive when not in use.
• Always disconnect the battery when not in use.
• The dDrive will become hot during use, be careful before
touching or handling it.
Failure to exercise caution while using this product could
result in product malfunction, electrical issues, excessive
heat, FIRE, and ultimately injury and property damage.
Not for children under 14 years. This is not a toy.
INSTRUCTION MANUAL · ENGLISH
www.teamorion.com 7
LIMITED WARRANTY
Team Orion warrants to the original purchaser that the
product purchased is free from defects in materials and
workmanship at the date of purchase. Team Orion reserves
the right to change or modify this warranty without notice
and disclaims all other warranties, express or implied. This
warranty is limited to the original purchaser and is not
transferable. Replacement as provided under this warranty
is the exclusive remedy of the purchaser. This warranty
covers only the products purchased from an authorized
dealer. Third party transactions are not covered by this
warranty. Proof of purchase is required for warranty
claims. Team Orion makes no warranty or representation,
express or implied, about non infringement, merchantability
or tness for a particular purpose of the product. The
purchaser acknowledges that they alone have determined
that the product will suitably meet the requirements of the
purchaser’s intended use.
Team Orion’s sole obligation hereunder shall be that it will,
at its option, repair or replace any product determined by
Team Orion to be defective in the event of a defect, this is
the purchaser’s exclusive remedy. Replacement decisions
are at Team Orion’s sole discretion. This warranty does
not cover cosmetic damage or damage due to acts of God,
accident, misuse, abuse, negligence, commercial use, or
modication of or to any part of the product. This warranty
does not cover damage due to improper installation,
operation, maintenance or attempted repair by anyone.
Team Orion will not be liable for special, indirect or
consequential damages, loss of prots or production or
8 Copyright Team Orion © 2015
commercial loss in any way connected with the product,
whether claim is based in contract, warranty, negligence, or
strict liability. Further, in no event shall the liability of Team
Orion exceed the individual price of the product on which
liability is asserted. As Team Orion has no control over use,
setup, nal assembly, modication or misuse, no liability
shall be assumed nor accepted for any resulting damage
or injury. By the act of use, setup or assembly the user
accepts all resulting liability. If you as the purchaser or user
are not prepared to accept the liability associated with the
use of this product, you are advised to return this product
immediately in new and unused condition to the place of
purchase.
Instructions for disposal of WEEE by users in the
European Union
This product must not be disposed of with other waste.
Instead, it is the user’s responsibility to dispose of their
waste equipment by handing it over to a designated
collections point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling
of your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in
a manner that protects human health and the environment.
For more information about where you can drop o your
waste equipment for recycling, please contact your local city
oce, your household waste disposal service or where you
purchased the product.
www.teamorion.com 9
FEATURES
• Designed for on-road and o-road 1/10 scale cars
• Splash proof
• Forward and reverse function
• 4 pole brushless motor
• 45A ESC
• High power built-in BEC system
• Easy set-up via the setup button located on the switch
• Adjustable parameters
• Multiple protection systems: battery low voltage cut-o,
overheating, radio signal loss, stuck motor
INSTALLATION - CONNECTION
ATTACHMENT: Attach the dDrive to the car’s motor mount
using 3mm metric screws. If a motor was already tted to
your car, you will likely be able to re-use the same screws.
Adjust the motor so that there is about 0.5mm play between
the gear and pinion.
WARNING! If the motor screws are too long, you risk
shorting and damaging the motor!
GEARING: You can use the original pinion that came with
your car. However, you may also need to change the gearing
to get optimal performance. If the dDrive overheats use a
smaller pinion, if the car is slow and the motor temperature
is low, you can use a bigger pinion to increase performance.
10 Copyright Team Orion © 2015
CONNECTION: The dDrive is equipped with a battery
connector, a receiver plug and a power/setup switch.
Connect the ESC receiver plug to the channel 2 of your
receiver and secure the switch with double-sided tape to the
car chassis.
BATTERY: Use a 2S LiPo 7.4V (recommended) or 6-7 cell
NiMH 7.2-8.4V battery as a power source. The battery must
be equipped with a Deans® type connector compatible
with the one installed on the ESC. Using low grade batteries,
adapters or modifying the ESC connectors, can cause loss of
performance, damage, or void the warranty.
ESC CALIBRATION
In order to ensure proper function, the ESC must be
calibrated to your transmitter inputs. It is recommended to
center the trims and reset all settings inside the transmitter
before proceeding with the calibration. Follow the procedure
below to calibrate your ESC
A. Switch o the ESC and switch the transmitter on,
B. Press and hold the SET button (located on the ESC’s
switch), then switch on the ESC. Release the SET button as
soon as the red LED starts to ash.
C. Calibrate the throttle points by pressing the SET button
once after each step.
1. neutral point (1 green ash)
2. full throttle (2 green ashes)
3. full brakes/reverse (3 green ashes)
D. The motor will run 3 seconds after the last step is
completed.
Tabla de contenidos
Idiomas:
