TCS Carus Origo Manual de usuario
a brand of TCS AG
Design Manufaktur Adelheid
Adelheid 41
78098 Triberg
Germany
www.carus-concepts.com
Tel: +49 7722 91770
Fax: +49 7722 917718
- Art. no. 0035783 Version 1 A -
3 years warranty
Instruction manual
Carus Origo
Design
„A simple form, a classic layout and high-end mate-
rials guarantee timeless aesthetics. The Carus edition
refl ects the reliability and sustainability of the pro-
ducts in perfect form and sophisticated design. Our
emphasis on traditional crafts that we utilise to ma-
nufacture the high-quality surfaces, make the Carus
products unique items. The harmony between the
traditional and the modern element of our products
enable us to design customised and fi rst-class pro-
ducts which refl ect the user and inspire emotions.“
Table of contents
02
02
03
04-05
06
07
08-09
10
11
12
13
Device overview
LED indication
Operating elements
Setting the video image
Settings in the OSD menu
External image buffer
Confi gurable functions
Store images
View and delete images
Cleaning
Notes
2
Loudspeaker
Microphone
Your brandnew video indoor station!
Call OFF-button
2 navigation
buttons
Image button
Door release
button
Speech button
Menu button
Function key
Display
Red LED
Green LED
• Green LED is on
• incoming door or
internal call
• active voice
connection
• additional function
is activated
See page 10 and 11.
• Red LED is on
• ring tone is switched
off, an incoming
call is not signalled
acoustically
• Red LED blinks
• busy speech channel
LED indication
CAI2000
•
•
•
3
A ring tone signals an
incoming call.
The green LED is on.
Speaking
Shortly press the speech
button to accept the call
or longer than 1 second
to switch-over to simplex
communication during an
active voice connection.
The green LED is on.
Shortly press the speech
button again or the door
release button to end
the conversation (the call
is terminated after four
seconds).
Automatic call cut-off after 2 minutes.
Door release
Shortly press the blue
door release button.
WE = factory setting.
Switching lights /
Internal calls / Activate
additional functions
Shortly press the function
key to switch the lights,
to call another indoor
station or to (de-)activate
the call diversion resp. the
door release automatic.
Confi guration necessary, see additional
functions, page 10.
Ring tone mute
Press the call OFF-button.
An incoming call is not
signalled acoustically.
The red LED is on.
Image activation
Shortly press the image
button to display the
image of the front-door
station.
See also additional functions, page 5.
Menu
This button is used to set
the image and ring tone
parameter, to display
indications and calls from
internal call destinations
as well as for displaying
and triggering control
functions.
See page 5 till 9.
Navigation buttons
These buttons are used to
set image and ring tone
parameter.
See page 5 till 9.
Operating elements
4
Setting the video image
The display
Fading-in the video image is realised immediately after
pressing the image button or after receiving a
door call. The symbols are faded-in automatically.
Optionally, the speech button can be pressed to receive video images and noises when in
standby mode (speaking and video must be deactivated).
Fading in the symbols
in the video image is
realised automatically. If
the speech button was
pressed, the fading in of
the symbols ends after 3
seconds.
Image from camera
No. 05
Image buffer
is activated
Ring tone mute
Call diversion
is activated
Door release auto-
matic is activated
05
5
Settings via display
Setting image contrast, brightness, color saturation and
conversation volume is realised quick and easily at the
displayed video image.
1. Shortly press the image
button . The image
of the video front-door
station is displayed.
2. Shortly press the menu
button . The menu
for settings is displayed.
3. Press the navigation
buttons UP or DOWN to
switch to the next para-
meter.
4. Press the navigation
buttons UP or DOWN
to adjust the parameter
value. The change is dis-
played immediately in the
bar diagram and can be
seen on the video image.
The menu is deactivated
automatically after 10
seconds if no button is
pressed. Shortly press
the function key
to deactivate the menu
immediately.
Contrast
Brightness
Color saturation
Conversation
volume*
*can only be adju-
sted while speaking
Setting the video image
6
Setting ring tone volume and ring tones
The setting of ring tone volume and the selection of
your required ring tone can be realised quick and easily
in the OSD menu of the display when in standby mode
(speaking and video must be deactivated).
Settings in the OSD menu
1. Shortly press the menu
button . The main
menu is displayed.
2. With the navigation
buttons UP or
DOWN the menu
ring tone parameter can
be selected. Confi rm the
selection by pressing the
menu button again.
3. You are now in the
menu ring tone parame-
ter. With the navigation
buttons UP or
DOWN the required
ring tone can be selected.
When selecting a ring
tone, the ring tone
sounds immediately.
When selecting the ring
tone volume, the current
ring tone sounds in the
selected volume after the
setting.
The menu is deactivated
automatically after ten
seconds if no button is
pressed or shortly press
the function key .
Control function*
Internal call*
External image
buffer
Ring tone para-
meter
Date/time
external image
buffer
Delete external
image buffer
Ring tone volume
Ring tone selection
for door calls
Ring tone selection
for fl oor calls
Ring tone selection
for internal calls
Ring tone selection
for sub tones 1,2,3,4
*Symbol is displayed only after the confi gu-
ration, not in factory setting
Main menu
selected
parameter menu
toolbar for parameter menu
Menu ring tone
value of the parameter
0,1,2, ..
toolbar for parameter menu
7
Setting date and time
The setting of date / time for stored images is realised
quick and easily in the OSD menu of the display when
in standby mode (speaking and video must be deacti-
vated).
External image buffer*
1. Shortly press the menu
button . The main
menu is displayed.
2. Select the symbol
image buffer setting
with the navigation but-
tons UP or DOWN
. Confi rm the selec-
tion by pressing the menu
button again.
3. The image buffer
menu is displayed. The
white backlit digit can be
adjusted with the naviga-
tion buttons UP or
DOWN . With the
menu button you
can forward to the next
position.
4. If setting the date is
fi nished, pressing the
menu button again
calls up the time setting.
Proceed as described in
setting the date.
5. By pressing the menu
button again, the
menu is deactivated and
the settings are stored in
the external image buffer.
Main menu
selected
parameter menu
toolbar for parameter menu
menu date /time/image buffer
* only in combination with FVM1000-0400 (not enclosed in the delivery)
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de TCS
TCS
TCS ISW3130-0140 Manual de usuario
TCS
TCS IVW2221-015x Manual de usuario
TCS
TCS ISH3030-0140 Manual de usuario
TCS
TCS PSC2 0 Series Manual de usuario
TCS
TCS ECOOS:FIVE Manual de usuario
TCS
TCS ISH3030 Manual de instrucciones
TCS
TCS ISH3230 Manual de usuario
TCS
TCS ISW3130 Manual de usuario
TCS
TCS ISH3030-0140 Manual de usuario
TCS
TCS IVW2211-0218 Manual de usuario
TCS
TCS ISH3022-0140 Manual de usuario
TCS
TCS Carus Adapto Manual de usuario
TCS
TCS IMM2300 Manual de usuario
TCS
TCS PUK Series Manual de usuario
TCS
TCS AMI Series Manual de usuario
TCS
TCS ISW3230-0140 Manual de usuario
TCS
TCS Tasta Series Manual de usuario
TCS
TCS AMI1090 Series Manual de usuario
TCS
TCS ISW5010-0145 Manual de instrucciones
TCS
TCS Carus Origo CAI2010 Manual de usuario
