r
Adjusting The
Displ~y
1.
CONTRAST
The contrast becomeshigher
as
the CONTRAST control
is
turned clockwise, and becomes
lower
as
it
is
turned counterclockwise.
2.
BRIGHT
The screen becomes brighter
as
the BRIGHT control
is
turned clockwise, and becomes
darker as it
is
turned counterclockwise.
3.
V.
HOLD
When the screen image flows or overlaps vertically, adjust the
V.
HOLD to get the correct
image. (See illustration 1.)
4.
H.
HOLD
When the screen image appears to
give
a horizontally striped pattern
or
the image shifts left
or
right, adjust the
H.
HOLD to get the correct image. (See illustration 2.)
5.
V.
SIZE
When the vertical size
of
the screen image
is
too short
or
too long, adjust the
V.
SIZE to get
the correct size. (See illustration 3.)
6.
H.
SIZE
When the horizontal size
of
the screen image
is
too
short or too long, adjust the
H.
SIZE to
get the correct size. (See illustration 4.)
7.
V.
POS!.
When the screen image shifts vertically, adjust the V. POS!. to get the correct image. (See
illustration 5.)
8.
H.
POS!.
When the screen image shifts horizontally, adjust the H. POS!. to get the correct image. (See
illustration 6.)
9.
FOCUS
Adjust the FOCUS so as to get the sharpest image. (See illustration 7.)
10.
V.
LIN.
Adjust the
V.
LIN. so
that
the height
of
characters
is
even over the whole screen. (See illustra-
tion 8.)
11. SUB-BRIGHT
Tum
the BRIGHT
control
to
maximum and
the
CONTRAST control
to
minimum. Adjust
the
SUB-BRIGHT
control
(R283)
just before
the
video with an intensity signal disappears.
-6-
