Taski Swingo 1650 Manual

swingo 1650/1850 Wet Cell Conversion

1. Remove existing AGM

batteries

7. Using a T25 screwdriver

remove the control panel cover.

2. Remove charger and then

disconnect the connected wires.

8. Unplug the 6 pin connector

with the old wiring harness and

replace with the new switch

wiring harness.

3. Remove charger bracket.

4. Remove rear gray panel with

a T30 screwdriver

5. Cords should now be

exposed.

6. Using a T15 screwdriver

remove the cord and metal

bracket.

Parts Needed:

- (4) 6V wet batteries - 192-9009

- (1) Battery charger - 292-5276

- (1) Wet battery kit - 292-5257

- (1) Prop - 292-5258

- (3) Screws - 192-0509

- (3) Nuts - 192-6346

- (1) Lock assembly - 292-5259

- (1) Battery tray - 192-9382

- (1) Charger plug and wire kit - 292-5260

- (36”) 6 gauge wire (red) - 998-0055

- (36”) 6 gauge wire (black) - 998-0056

- (2) Screw - 192-0549

- (2) 6 gauge Nylon ring 5/16” stud - 998-0065

- (1) 50amp charger plug (red) - 991-2103

- (1) Charger switch with wiring harness - 192-9941

- (1) Switch lever - 192-8784

- Misc. - Zip Ties and Electrical Tape

Tools Needed:

- T30 torx screwdriver

- T25 torx screwdriver

- T15 torx screwdriver

- 10mm wrench

- 13mm wrench

- Small Phillips screwdriver

- Laptop (Windows XP/7)

- USB Cable

- Service Tool / Firmware

(download at www.usaclean.com)

New

Old

Tip: Using electrical tape, attach

the old wiring harness to the

new wiring harness to help ﬁsh

it up to the control panel.

swingo 1650/1850 Wet Cell Conversion

9. Add the switch lever to the

end of the new switch harness.

This switch is the kill switch

that prevents the machine from

turning on while it is charging.

10. Using a small Phillips

screwdriver, attach the new plug

to the back panel

11. Using zip ties, group

the wires together and then

reattach back panel

12. Lift up the tank and pull

the wires through from the

back panel into the battery

compartment.

13. Connect the red cable from

the charger plug to the solenoid

with a 13mm wrench.

19. Using a T30 torx, remove

bracket on tank lid from top set

of holes. The bracket can be

discarded but keep the screws.

14. Feed the black cable from

the charger plug to connect to

the battery cable.

20. Attach prop kit lock

assembly to the bottom set of

holes on tank lid with screws

from the bracket removed in

step 19.

15. Insert the battery tray 22. Plug in USB cable and

update ﬁrmware with laptop to

wet battery conﬁguration.

16. Install wet batteries.

17. Please note that the battery

cables have a positive and

negative icon on the speciﬁed

sides.

18. Hook up the battery

cables and tighten terminals

with 10mm wrench. The main

terminal uses a 13mm wrench.

For service tool and ﬁrmware updates please login to www.usaclean.com and go to the documents drop down menu to download materials.

21. Using a 13mm wrench,

install prop to frame so the prop

is at a 90 degree angle to the

frame.

Note: If the lid does not close all

the way, the lock assembly may

need to be adjusted.

Otros manuales para swingo 1650

Este manual sirve para los siguientes modelos

Otros manuales de Depurador de Taski

Taski

Taski swingo 455B Manual de usuario

Taski

Taski swingo 2500 Manual de usuario

Taski

Taski combimat 1400 Manual de instrucciones

Taski

Taski swingo 455B Manual de usuario

Taski

Taski ergodisc 165 Manual de usuario

Taski

Taski swingo 350B Manual de usuario

Taski

Taski swingo 755 Manual de instrucciones

Taski

Taski AERO 3500 micro Manual de usuario

Taski

Taski Diversey ULTIMAXX 1900 Manual de usuario

Taski

Taski swingo 855B power Manual de usuario

Taski

Taski swingo 855B power Manual de instrucciones

Taski

Taski swingo 250micro Manual de usuario

Taski

Taski swingo 1650 Instrucciones de funcionamiento e instalación

Taski

Taski swingo XP-M Manual de instrucciones

Taski

Taski swingo 4000 Manual de usuario

Taski

Taski swingo 450E Manual de instrucciones

Taski

Taski Diversey Swingo 1650 Manual de usuario

Taski

Taski Combimat swingo 3500 Manual de usuario

Taski

Taski CO150.5 Instrucciones de funcionamiento e instalación

Taski

Taski swingo 455E Manual de usuario

Taski

Taski Diersey ULTIMAXX 2900 Manual de usuario

Taski

Taski swingo 455B Manual de usuario

Manuales populares de Depurador de otras marcas

Olympus

Olympus M200H Manual de usuario

Clarke

Clarke BEXT 100H Manual de instalación y funcionamiento

JOHNY VAC

JOHNY VAC JVC70BCT Manual de usuario

RCm

RCm Elan Series Manual

Kärcher

Kärcher B 120 W Manual de usuario

Truvox

Truvox Orbis MotorScrubber 20 Manual de usuario

Numatic

Numatic TTB 4045/100 Manual de usuario

U.S. Products

U.S. Products PEX 500-C-TICK Instrucciones de funcionamiento

Mclennan

Mclennan C510 Manual de usuario

Tennant

Tennant T20 LPG Manual de usuario

Columbus

Columbus ARA 66 BM 100 Manual de usuario

Numatic

Numatic TTV 678G / 300T Manual de usuario

American-Lincoln

American-Lincoln 505-945 Manual de usuario

FIORENTINI

FIORENTINI ET 65-75 Manual de usuario

Floorpul

Floorpul ruby 48 blt Guía del usuario

Onyx

Onyx RX-34 Manual de usuario

Dustbane

Dustbane Hurricane 400 Manual de usuario

Sana

Sana EUJ-702 Manual de usuario

Taski swingo 1650 Manual

Manuales populares de Depurador de otras marcas