TALOS ITR-CS15D Manual de usuario
User’s Manual
ITR-CS15D
ITR-CS15D
Copyrights i
Copyrights
©2012 TALOS INTEGRATED
TECHNOLGIES. All rights reserved. The information
in this document is subject to change without prior
notice in order to improve reliability, design and
function and does not represent a commitment on the
part of the manufacturer.
This document contains proprietary information
protected by copyright. All rights are reserved.
No part of this manual may be reproduced by any
mechanical, electronic, or other means in any
form without prior written permission of the
manufacturer.
All trademarks are property of their respective
owners
Liability Disclaimer
In no event will the manufacturer be liable for
direct, indirect, special, incidental, or
consequential damages arising out of the use or
inability to use the product or documentation,
even if advised of the possibility of such damages.
Regulatory Information
FCC Notices
Safety Statement for
Lithium Battery
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCOORECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
TALOS INTEGRATED TECHNOLOGIES
411 BRADWICK DR. UNIT# 11
VAUGHAN, ONTARIO L4K 2P4
ITR-CS15D
Contents
ii
Contents
Copyrights .................................................................................................i
Liability Disclaimer ...................................................................................i
Regulatory Information.............................................................................i
FCC Notices.......................................................................................................... i
Safety Statement for Lithium Battery......................................................i
Contents....................................................................................................ii
1. Hardware Setup....................................................................................4
1.1. Packing Contents ......................................................................................... 4
1.2. Quick Tour .................................................................................................... 5
Front View and Side View .............................................................................. 5
Back Panel I/O ............................................................................................... 6
1.3. HDD Replacement ........................................................................................ 6
1.4. Basic Peripherals Installation ..................................................................... 8
Power Adapter ............................................................................................... 8
USB Mouse, USB Keyboard and USB ODD.................................................. 9
LAN Cable...................................................................................................... 9
Cash Drawer .................................................................................................. 9
Customer Display......................................................................................... 10
MSR............................................................................................................. 14
1.5. Adjust Angle ............................................................................................... 15
1.6. Turn on the device...................................................................................... 15
2. Basic Driver Installation ....................................................................16
2.1. Before the installation................................................................................ 16
2.2. Chipset Software Installation .................................................................... 16
2.3. VGA Driver Installation .............................................................................. 17
2.4. Touch Screen Driver and Software Utility installation ............................ 18
2.5. LAN Driver Installation............................................................................... 20
3. Touchscreen Control Panel Quick Guide ........................................23
3.1. Launch TouchKit Utility ............................................................................. 23
3.2. General........................................................................................................ 24
3.3. Settings....................................................................................................... 25
3.4. Tools............................................................................................................ 28
3.5. Display ........................................................................................................ 30
3.6. Edge Compensation .................................................................................. 32
4. I/O Definition.......................................................................................35
4.1. Power Connector ....................................................................................... 35
ITR-CS15D
Contents iii
4.2. Serial Port COM1/3..................................................................................... 35
4.3. COM 2 (10-Pin RJ50) .................................................................................. 35
4.4. Cash Drawer ............................................................................................... 36
5 Specification........................................................................................37
ITR-CS15D
Chapter 1
4
1.
1. Hardware Setup
1.1. Packing Contents
1. ITR-CS15D X 1 4. RJ50 to DB9 COM port adapter cable X 1
2. Power Adapter X 1 5. IO/Cable Cover X 1
3. Power Cord X 1 6. Drive and Utility DVD X 1
ITR-CS15D
Chapter 1 5
1.2. Quick Tour
Front View and Side View
A. The LED indicator will glow green when power is on.
The LED indicator will blink red when the HDD is accessed.
A. Customer Display mounting
hole cover D. Power switch
B. HDD tray E. I/O cover
C. MSR cover
ITR-CS15D
Chapter 1
6
Back Panel I/O
A. DC in G. CD/DIO (for cash drawer)
B. COM 2 (10-pin RJ -50)*H. CF card slot
C. USB 1/2 I. USB 3/4
D. LAN 1 J. COM3
E. LAN 2 K. VGA
F. COM1
CAUTION
* Note: Please use 10-pin RJ50 connector, 8-pin RJ45 is incompatible.
1.3. HDD Replacement
1. Loosen and remove the screws fixing the HDD tray.
2. Pull out the HDD tray slightly and softly.
ITR-CS15D
Chapter 1 7
3. Disconnect the SATA cable connector and the SATA power cable connector.
4. Loosen and remove the four screws fixing the HDD, and then remove the HDD
from the HDD tray.
5. Install the new HDD onto the device in reverse order.
ITR-CS15D
Chapter 1
8
1.4. Basic Peripherals Installation
1. Remove the IO panel cover from the device.
2. All cables and wires from peripherals to the POS device are recommended to
be fed through the base in the direction as shown below.
WARNING
Before the cable cover is removed, please make sure the power is off.
Power Adapter
Connect the DC cable to the DC in jack.
ITR-CS15D
Chapter 1 9
USB Mouse, USB Keyboard and USB ODD
Connect your USB Mouse, USB Keyboard USB ODD or other USB devices to
USB 1/2 or UBS 3/4 ports on the back panel of the device.
LAN Cable
Connect one end of RJ-45 LAN cable to the LAN 1 or LAN 2 port on the back
panel of the device, another end to your internet device.
Cash Drawer
Connect one end of RJ-11 cable to the Cash Drawer port on the back panel of the
device, another end to your cash drawer.
Tabla de contenidos
