Talk To Me Technologies Wego A Manual de usuario

Quick Reference

wego

TTMT Switch Interface - GoTalk NOW PLUS

Need help? [email protected]877.392.2299 Option 3 talktometechnologies.com

Note: If these instructions do not match your current vocabulary set, please contact

Technical Support for assistance.

WCD-0920

Setup Instructions

Turn on the TTMT Switch Interface, using the on/off switch

located on the side of the interface box. You will see a red

power light to indicate the interface is turned on.

Ensure the Switch Interface is connected to the wego via

Bluetooth.

1. Exit the communication software. If you are unable to exit

the software, you may be in Guided Access.

2. Open the iOS Settings then select Bluetooth. Ensure

Bluetooth is toggled On. Under My Devices, you should

see TTMT Switch listed as Connected. If not, tap on

“TTMT Switch” to connect. You may see a pop-up

Bluetooth Pairing Request, if so, press Pair.

3. Once the Switch Interface is connected via Bluetooth, you

can plug in your switches and begin setup. Connect your

Switch or Switches to the TTMT Switch Interface.

The Switch Interface can be used with one or two switches.

For single-switch scanning, plug your switch to Switch Port 1.

For two-step scanning, plug in both switches, with your

“chooser” in Port 1 and your “mover” switch in Port 2.

Setup with GoTalk NOW PLUS

1. Return to the communication app, GoTalk NOW PLUS.

Open Settings and Scroll to Scanning.

2. Select Scanning Device Type > Space and Enter Switch.

3. Determine Scanning Mode.

a. For single-switch scanning, toggle on Auto Scan.

b. For two-switch scanning, toggle off Auto Scan.

4. Select Grouping Style (row, column, etc), Speed, Repeat,

etc. as preferred.

5. Press Done to close Settings and return to Player Mode.

Hardware, Buttons & Features

Need help? [email protected]877.392.2299 Option 3 talktometechnologies.com

Power

Flip switch into up position to turn on the Bluetooth

device and flip switch down to turn it off.

Power light indicator

When this light is on and red, the Bluetooth device is on.

Charging the TTMT Switch Interface

Plug charger into port to charge the switch interface.

Please only use a TTMT-approved charger with your

device.

Switch Port 1

Plug switch cords into the switch ports.

Switch Port 2

Plug switch cords into the switch ports.

TTMT Switch Interface

Otros manuales para wego A

Tabla de contenidos

Otros manuales de Equipo de grabación de Talk To Me Technologies

Talk To Me Technologies

Talk To Me Technologies wego A Manual de usuario

Talk To Me Technologies

Talk To Me Technologies wego A Manual de usuario

Talk To Me Technologies

Talk To Me Technologies wego A Manual de usuario

Talk To Me Technologies

Talk To Me Technologies zuvo PLUS Manual de usuario

Talk To Me Technologies

Talk To Me Technologies wego A Manual de usuario

Talk To Me Technologies

Talk To Me Technologies zuvo 12-D Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado