T3 SinglePass X Manual de usuario

SinglePass X

User Guide

1.50 Inch Straightening Iron

Model No. 73540

WARNING

DANGER

WARNINGWARNING

IMPORTANT

SAFETY INSTRUCTIONS

IMPORTANT

SAFETY INSTRUCTIONS

OPERATING INSTRUCTIONS

Electrical Cord

Heating Plate

2 sectioning

clips (included)

Main Body

Power & Temperature

Adjustment Button

Operating Display

Plug

The Heating Plates will become very hot within a few seconds.

Avoid contact with skin to prevent burns.

Audio Mode: Click power button quickly to begin operation.

Silent Mode: Hold the power button down 2 seconds to

begin operation.

Changing Modes: Turn the iron oﬀ ﬁrst, and then turn on

the iron using Audio Mode or Silent Mode operation.

While the iron is on, adjust the temperature

by double clicking the power button. You

will hear a tone and the lights will ﬂash.

Continue to click the power button to cycle

through the temperature settings.

When you reach the desired setting,

release the button.

After several seconds you will hear another

tone, the selected temperature light will

ﬂash and the lights will cascade up or

down as the iron is adjusting to the

selected temperature.

When the iron has reached your set

temperature, you will hear three tones

indicating the iron is ready to use.

Press the power button using AUDIO

MODE or SILENT MODE to turn the

iron on. You will hear a tone and the

lights on the iron will cascade up.

The temperature lights and T3 logo will

turn solid when the iron is ready to use

and you will hear a long tone.

Upon ﬁrst use, the iron will automati-

cally heat up to 390ºF, indicated by 4

solid lights.

Note: Each time you turn the iron on, it

will heat up to the last set temperature.

SinglePass X

KEEP AWAY FROM WATER

Electricity and water are a dangerous combination and can cause

death by electric shock. Do not allow electrical cords to come into

contact with water or other liquids.

ELECTRICAL APPLIANCES ARE ELECTRICALLY LIVE WHEN PLUGGED

IN, EVEN IF TURNED OFF.

To reduce the risk of death by electric shock:

1. Always unplug the appliance immediately after using.

2. Do not use while bathing.

3. Do not place or store appliance where it can fall or be pulled into

a tub or sink.

4. Do not place in or drop into water or other liquid.

5. If appliance falls into water, unplug it immediately. Do not reach

into the water.

Do not use the appliance near a bath tub, washbasin or other

vessel ﬁlled with water. Never place the appliance in water or

any other liquid.

SERVICING OF DOUBLE-INSULATED APPLIANCES

In a double-insulated appliance, two systems of insulation are provided

instead of grounding. No grounding means is provided on a

double-insulated appliance, nor should a means for grounding be added

to the appliance.

Servicing a double-insulated appliance requires extreme care and

knowledge of the system, and should be done only by qualiﬁed service

personnnel.

Replacement parts for double-insulated appliance must be identical to the

parts they replace. A double-insulated appliance is marked with the words

“DOUBLE INSULATION” or DOUBLE INSULATED”. The symbol (square within

a square) may also be marked on the appliance.

USING THE DUAL-VOLTAGE APPLIANCE

This appliance can automatically change the working voltage, not

combined with a voltage selector switch.

Conﬁrm the voltage available at each overseas location before using the

appliance. For connection to a 240-volt supply, use an attachment plug

adapter of the proper conﬁguration for the power supply receptacle.

This appliance is intended for household use. Use on Alternate Current

(60 Hertz) only. This appliance has a polarized plug (one blade is wider

than the other). As a safety feature, this plug will ﬁt in a polarized outlet

only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If

it still does not ﬁt, contact a qualiﬁed electrician. Do not attempt to defeat

this safety feature.

To reduce the risk of burns, electrocution, ﬁre or injury:

1. Make sure to remove plug from outlet after use.

2. Never leave appliance unattended when plugged in.

3. Do not use if plug is loose in the outlet.

4. Close supervision is necessary when this appliance is used by, on,

or near children or individuals with certain disabilities.

5. Never operate this appliance if it has a damaged cord or plug, if it

is not working properly, or if it has been dropped, damaged, or

dropped into water. Return the appliance to a service center for

examination and repair.

6. Do not use outdoors or operate where aerosol (spray) products

are being used or where oxygen is being administered.

7. Keep the cord away from heated surfaces. Do not wrap the cord

around the appliance.

8. Do not use an extension cord with this appliance.

9. This styling iron is hot when in use. Do not let eyes and bare skin

touch the heated surfaces.

10. Do not place the heated styling iron directly on any surface while it

is hot or plugged in. Place only on the provided mat.

11. Use this appliance only for its intended use as described in this

manual. Do not use attachments not recommended by the

manufacturer.

12. Never use while sleeping.

13, Never drop or insert any object into any opening or hose.

14. Before plugging in, read the information about dual voltage

contained in the instruction section of this manual.

USING YOUR

SinglePass X

USING YOUR

SinglePass X

READ ALL INSTRUCTIONS BEFORE USING

When using electrical appliances, basic safety precautions

should always be followed, including the following:

TEMPERATURE ADJUSTMENT MODE

OPERATING MODE

SAVE THESE INSTRUCTIONS

IMPORTANT

SAFETY INSTRUCTIONS

USING YOUR

SinglePass X

SELECT THE RIGHT TEMPERATURE

TEMPERATURE SETTINGS

Coarse, curly

or virgin* hair

Normal

hair

410°F

210°C

390°F

198°C

350°F

176°C

300°F

148°C

260°F

126°C

Fine, damaged or

chemically treated hair

Select the right temperature for your hair type using the chart

below. When using the iron for the ﬁrst time, it is recommended that

you start at the lowest setting and gradually increase the tempera-

ture based on your needs. Never style hair for the ﬁrst time on a

high setting as this may damage your hair.

*Hair that has not been chemically treated

Hair should be completely dried

before using the iron. Then use a

brush or comb to detangle hair.

Twist the top part of your hair out

of the way and secure it with one

of the included sectioning clips.

Gather the rest of your hair into the

other clip, leaving a thin section out

to begin styling.

To avoid kinks, style your hair using thin, horizontal

sections* so the iron can be positioned close to

the roots.

STYLING WITH YOUR

MODEL NO.

73540

SPECIFICATIONS

Operating Voltage: 120V/240V

Power Consumption: 48W

T3 Micro

Gardena, CA USA

Made in China

WWW.T3MICRO.COM

UG-73540

WARNING

Visit www.T3micro.com/register to complete

your warranty registration.

T3 Micro will repair or replace (at our option) T3 products for twenty-four

(24) months from the date of purchase if they are defective in workman-

ship or materials. This limited warranty does not cover (1) damage due to

misuse or abuse, such as incorrect voltage supply, dropping, or failure

to follow enclosed instructions or (2) tampering, such as repair or

attempted repair. To obtain service under this warranty, please call

1.888.340.8880 or email us at [email protected] to obtain a Return

Authorization Number as well as explicit instructions on how to return the

defective product. You will be required to return the defective product

with a proof of purchase, payment in the amount of $9.95 (irons) or $14.95

(dryers and showerheads) to cover shipping and handling, and a brief

description of the product's deﬁciencies. Please clearly mark the Return

Authorization Number on the outer packaging when sending us the

defective item.

THIS LIMITED WARRANTY IS ONLY VALID IF THE PRODUCT IS

PURCHASED FROM AN AUTHORIZED SELLER OF T3 GOODS AND IF

THE ORIGINAL SERIAL NUMBER ON THE PRODUCT HAS NOT BEEN

REMOVED OR OTHERWISE TAMPERED WITH.

Any implied warranties, obligations, or liabilities, including but not limited

to the implied warranty of merchantability and ﬁtness for a particular

purpose, shall be limited in duration to the 24 month duration of this

written limited warranty. Some states do not allow a limitation on how

long an implied warranty lasts, so the above limitation may not apply

to you.

IN NO EVENT SHALL T3 BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER

WARRANTY, EXPRESS OR IMPLIED.

T3 LIMITED WARRANTY

TERMS & CONDITIONS

Become a fan and discover

The Science of Fabulous

Receive information on new product releases,

stylist tips and tricks, and other news from

the behind the scenes world of T3.

FACEBOOK.COM/T3MICRO

YOUTUBE.COM/T3MICRO

WWW.T3MICRO.COM

USING YOUR

MAINTAINING YOUR

Take the hair section and

pull it taut starting at the

root. Clamp the iron close

to the roots and glide the

iron through slowly*.

To avoid burns, do

not allow the iron to

touch scalp.

Slow down for perfect results in a single glide:

Fine hair: Glide iron at 2-3 inches per second

Medium Hair: Glide iron at 2 inches per second

Coarse Hair: Glide 1 inch per second

To turn oﬀ the iron, hold the power button

down for 2 seconds. You will

hear a tone and the lights on the iron will

cascade down.

Note: You cannot turn the iron oﬀ

when you are in the TEMPERATURE

ADJUSTMENT MODE.

SinglePass X

1. Your appliance is virtually maintenance free. It contains no user

serviceable parts, and no lubrication is needed.

2. Keep heated surfaces clean and free of dust, dirt & hairspray.

3. If cleaning becomes necessary, disconnect the appliance

from the power source and let it cool. Wipe the exterior with a

damp cloth.

4. If any malfunction occurs, unplug the appliance, allow it to cool

and return it to service center to repair.

5. Never wrap the cord around the appliance since this will cause

the cord to wear prematurely and break. If the cord becomes

twisted, untwist it prior to use.

6. Handle cord carefully for longer life and do not put any stress on

the cord where it enters the handle. Avoid jerking, twisting or

straining especially at the plug connections. It could cause the

cord to fray and possibly break.

7. When not in use, your styling iron should be disconnected and

stored in a safe, dry location, out of reach of children. Do not wrap

the cord around the styling iron. Allow the cord to hang or lie loose

and straight at the point of entry into the styling iron.

8. Do not attempt to repair the appliance yourself.

Hair section should be as wide as the plate.

Hair section should be

as thick as the plate.

*Expert Tip:

STYLING WITH YOUR

SinglePass X

SECTION YOUR HAIRPREP YOUR HAIR GLIDE SLOWLY

STYLING WITH YOUR

SinglePass X

*Expert Tip:

Do not use the appliance near a bath tub,

washbasin or other vessel ﬁlled with water. Never

place the appliance in water or any other liquid.

Otros manuales para SinglePass X

Tabla de contenidos

Otros manuales de Hierro de T3

T3 SinglePassCOMPACT Manual de usuario

Manuales populares de Hierro de otras marcas

Clatronic

Clatronic DB 3703 Manual de usuario

TEFAL

TEFAL FV4093Z0 Manual de usuario

Gorenje

Gorenje SIH 2200 BS Manual de usuario

Philips

Philips GC6012 Manual de usuario

Bosch

Bosch 2 Series Manual de usuario

Riffel

Riffel Catena KB-819 Manual de usuario

Texi

Texi Hestia Manual de usuario

Maxwell

Maxwell MW-3010 Manual de usuario

TREVIDEA

TREVIDEA Girmi ST60 Manual de usuario

Philips

Philips HI5914/30 Manual de usuario

Primula

Primula Vapormat Manual de usuario

Magio

Magio MG-541 Manual de usuario

Scarlett

Scarlett SC-1334S Manual de usuario

Bosch

Bosch Sensixx B22L Manual de usuario

Philips

Philips GC651 Manual de usuario

Vitek

Vitek VT-1247 VT Manual de usuario

Cleanmaxx

Cleanmaxx 3397 Manual de usuario

Philips

Philips GC800 Manual de usuario