Sysgration TPMS TT02 Manual de usuario
TPMS TT02 User Guide
Sysgration Confidential 1
TPMS Trigger Tool
TT02
User Guide
V0.2
Prepared by: Sysgration Inc. Cooperation
TPMS TT02 User Guide
Sysgration Confidential 2
Outline
Button UI: .................................................................................................................................... 3
User Guide: ................................................................................................................................. 5
TT02 RS232 command settings ................................................................................................ 14
FW Upgrade Operation Guide .................................................................................................. 20
Upgrade thru USB: .................................................................................................................... 20
Upgrade thru Bluetooth (Cellphone): ........................................................................................ 22
TPMS TT02 User Guide
Sysgration Confidential 3
Button UI:
Screen state
Action
Power Off
Power
On
(display
2s)
Main
Menu
TPMS CHECK
(no sensor)
TPMS
CHECK
(searching)
TPMS CHECK
(found sensor)
Long press Power key
(USB plug out)
Power on
Power off
Power off Power off Power off
Short press UP key Cursor up
Short press Down key
Cursor
down
Short press OK key No
response
for TPMS
INFO item
Short press Cancel
key
Back to main
menu
Cancel trigger
Back to main
menu
Short press Trigger
key
Start trigger Start trigger
TPMS TT02 User Guide
Sysgration Confidential 4
Screen state
Action
Settings menu Enter combo
box field
FW Upgrade
screen
BT upgrade
screen
USB upgrade screen
(without USB plug in)
RESTORE
screen
ABOUT
screen
Long press Power
key(USB plug out)
Power off Power off Power off Power off Power off Power off Power off
Short press UP key
Cursor up Switch field
data item
Cursor up
Short press Down
key
Cursor down Switch field
data item
Cursor down
Short press OK key
Respond item:
FW UPGRADE、
RESTORE、
ABOUT
Respond
item:
USB、
BLUETOOTH
Reset to default
settings
then back to
settings menu
Short press Cancel
key
Back to main
menu
Back to
settings menu
Back to FW
upgrade
menu
Back to FW upgrade
menu
Back to settings
menu
Back to
settings
menu
Short press Trigger
key
Short press Left key
Exit combo
box field
Short press Right key
Jump to combo
box field item
pointed by
cursor.
Plug-in USB Enter USB
DFU
TPMS TT02 User Guide
Sysgration Confidential 5
User Guide:
Power on:
TT02 Screen
Power off:
TT02 Screen
Note:TT02 Will keep power on if under USB connection.
Display TT02 information for 2 seconds when
powering on.
Enter MAIN screen
TPMS TT02 User Guide
Sysgration Confidential 6
Trigger Sensor:
TT02 Screen
Press or to make the cursor move to
“TPMS CHECK” , then press to enter the
“TPMS CHECK” screen.
Press to trigger sensor
Start searching the sensor as below, or you can
stop the trigger progress by pressing .
Found the sensor
Fail to find the sensor
TPMS TT02 User Guide
Sysgration Confidential 7
Pressure / Temperature Units Setting:
TT02 Screen
Buzzer On/Off Setting:
TT02 Screen
Press or to make the cursor move to
“SETTINGS” , then press to enter the
“SETTINGS” menu.
Press or to make the cursor move to
“UNITS” , then press to enter the “UNITS”
item.
Press or to make the cursor move to
“SETTINGS”, then press to enter the
“SETTINGS” menu.
Press or to make the cursor move to
“BUZZER” , then press to enter the
“BUZZER” item.
Press or to switch the following options( PSI / ⁰F PSI /
⁰C kPa / ⁰F kPa / ⁰C Bar / ⁰F Bar / ⁰C ), then press
to exit the “UNITS” item.
Press or to switch the following options ( ON OFF), then
press to exit the “BUZZER” item.
TPMS TT02 User Guide
Sysgration Confidential 8
Backlight On/Off Setting:
TT02 Screen
LF Power Setting:
TT02 Screen
Press or to make the cursor move to
“LF POWER” , then press to enter “LF
POWER” item.
Press or to switch the following options ( HIGH NORMAL
LOW
)
, then press to exit the “LF POWER” item.
Press or to make the cursor move to
“SETTINGS”, then press to enter the
“SETTINGS” menu.
Press or to make the cursor move to
“BACKLIGHT”, then press to enter the
“BACKLIGHT” item.
Press or to switch the following options ( ON OFF), then
can press to exit the “BACKLIGHT” item.
Press or to make the cursor move to
“SETTINGS”, then press to enter the
“SETTINGS” menu.
TPMS TT02 User Guide
Sysgration Confidential 9
USB Port Working Mode Setting (USB HID/ UART):
TT02 Screen
Auto Power OFF Time:
TT02 Screen
※Check if the USB is plugged out.
Press or to make the cursor move to
“SETTINGS” , then press to enter the
“SETTINGS” menu.
Press or to make the cursor move to
“USB MODE” , then press to enter “USB
MODE” item.
Press or to make the cursor move to
“AUTO OFF”, then press to enter the
“AUTO OFF” item:
Press or to switch the following options ( USBHID
UART
)
, then press to exit the “USB MODE” item.
Press or to make the cursor move to
“SETTINGS”, then press to enter the
“SETTINGS” menu.
Press or to switch the following options ( 5 min 3 min 1
min OFF
)
, then press to exit the “AUTO OFF” item.
TPMS TT02 User Guide
Sysgration Confidential 10
TPMS Low Battery Alert:
TT02 Screen
FW Upgarde – Thru BLUETOOTH:
TT02 Screen
Press or to make the cursor move to
“SETTINGS”, then press to enter the
“SETTINGS” menu.
Press or to make the cursor move to
“FW UPGARDE”, then press to enter the
“FW UPGARDE” item.
Waiting for the connection with phone APP in 30s,
otherwise it will exit “BLUETOOTH” screen
automatically, or you can press to exit below
screen by manual within 30s.
Press or to make the cursor move to
“BLUETOOTH”, then press to enter the
“BLUETOOTH” item:
Press or to make the cursor move to
“TPMS LB”, then press to enter the “TPMS
LB” item:
Press or to make the cursor move to
“SETTINGS”, then press to enter the
“SETTINGS” menu.
Press or to switch the following options ( 2.7V 2.6V
2.5V 2.4V 2.3V OFF), then press to exit the “TPMS LB”
item.
Tabla de contenidos
