Synology RS3413xs+ Manual de usuario

Synology_QIG_RS3413xs+_20121224

Synology RackStation RS3413xs+

Quick Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents...............................................................................................................................................3

Synology RackStation at a Glance......................................................................................................................4

Safety Instructions...............................................................................................................................................6

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation...........................................................................................................7

Install Hard Disks and SSD.................................................................................................................................7

Add a RAM Module to RackStation.....................................................................................................................9

Add a Network Interface Card to RackStation...................................................................................................11

Replace a Malfunctioning Fan...........................................................................................................................13

Start Up Your RackStation................................................................................................................................15

LCM Display......................................................................................................................................................16

Chapter 3: Install DSM on RackStation

Install from Windows.........................................................................................................................................17

Install from Mac OS X.......................................................................................................................................19

Install from Linux...............................................................................................................................................19

Learn More........................................................................................................................................................21

Appendix A: Specifications

Appendix B: LED Indication Table

Chapter

Chapter 1: Before You Start

Before you start setting up your RackStation, please check the package contents to verify that you have received

the items below. Please also read the safety instructions carefully before use to prevent your RackStation from

any damage.

Package Contents

Main Unit x 1 AC Power Cord x 2

Installation Disc x 1

Screws for 3.5" Hard Drives x 52

Screws for 2.5" Hard Drives x 52

Screws for 2.5” SSD x 10

4 Chapter 1: Before You Start

Synology RackStation at a Glance

No. Article Name Location Description

1) Power Button Front Panel Press to turn RackStation on and off. Press the Power Button and hold

until you hear a beep sound and the Power LED starts blinking.

2) LCM Display Front Panel Displays server name, network information, hardware malfunction

alerts, and provides basic controls. For more information, see “LCM

Display” on Page 16.

3) LED Indicators Front Panel The LED indicators display the status of internal disks and the system.

For more information, see “Appendix B: LED Indication Table” on Page

23.

4) SSD Trays Behind

LCM Panel Install SSD (Solid State Drive) here for SSD cache usage. (Pull handle

marked above to open LCM panel and access SSD trays.)

5) Hard Drive Trays Front Panel Install hard disks here for usage with your Synology RackStation.

6) Escape/Up/Down/Enter Front Panel Use these buttons to navigate info menus on the LCM display. For more

information, see “LCM Display” on Page 16.

7) Fan Back Panel Fans dispose of excessive heat from the power supply. In the event a

fan malfunctions, your RackStation will emit a beeping sound every few

seconds.

8) Power Supply On/Off

Switch Back Panel Press to turn on/off the power supply.

9) Power Supply

Safety Latch Back Panel The power supply safety latch is used to secure the power supply in

place.

10) Beep Off Back Panel Press to deactivate beep sound when malfunctions occur.

11) Redundant Power LED Back Panel Displays status of redundant powers supplies, alerting the user of

power supply or fan failure.

12) LAN Ports Back Panel For connecting RJ-45 cables to your Synology RackStation.

13) Power Supply Safety

Panel Back Panel Remove screws and panel before removing power supply.

14) Power LED Back Panel Displays Power Supply On/Off/Shutting down

15) Power Port Back Panel Connect power cords here to supply power to your RackStation

16) Console Port & VGA Port Back Panel For manufacturing use only.

5 Chapter 1: Before You Start

No.

Article Name

Location

Description

17) USB Port Back Panel Connect external hard drives, USB printers, or other USB devices to

your Synology RackStation.

18) LAN LED Back Panel Displays network status of each LAN port. Each LAN port has two

individual LEDs.

19) Expansion Ports Back Panel Connect Synology Expansion Units1

20)

to your Synology RackStation.

RESET Button Back Panel 1.Press and hold to restore IP, DNS, passwords for the admin account

to default value.

2.Press and hold to reinstall software on your Synology RackStation.

---------

1For more information about Synology Expansion Unit supported by your RackStation, visit www.synology.com.

6 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not

experience abrupt changes in temperature or humidity.

Keep Synology product in a correct, secure position.

Do not place the Synology product close to any liquid.

Before cleaning, unplug the power cord first. Wipe Synology product with damp paper

towels. Do

not use chemical or aerosol cleaners to clean it.

To avoid the damaging your RackStation, do not place on a cart, table, desk, or ,

other insecure

location

The power cord must plug in to the right supply voltage. Make sure that the supplied AC voltage

is correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected

from the power source.

Chapter

Chapter 2: Hardware Setup

Tools and Parts for Hard Disk Installation

A screwdriver

At least one 3.5” or 2.5” SAS or SATA hard disk

(Please visit www.synology.com for compatible hard disk models)

Warning:

Install Hard Disks and SSD

If you install a hard disk that contains data, the system will format the hard disk and erase all data. Please

back up any important data before installation.

Before using your Synology RackStation to store or share data, please install at least one hard disk. In addition,

RackStation offers the option to install SSD (Solid State Drives) in order to boost cache read performance. This

section will guide you through the process of installing hard disks and SSD on your Synology RackStation.

Install Hard Disks

1 Find the small button located on the hard drive tray handle. Press the button down and pull the hard drive tray

handle out as illustrated below.

2 Remove the hard drive tray and place the hard disk in as follows:

3.5” Hard Disks:

Place the hard disk in the hard drive tray. Turn the tray upside down and tighten screws

into the four spots indicated below to secure the hard disk.

8 Chapter 2: Hardware Setup

2.5” Hard Disk:

Place the hard disk in the hard drive tray. Turn the tray upside down and tighten screws

into the four spots indicated below to secure the hard disk.

3 After securing the hard disk and tray, insert both into the empty hard drive bay.

Important:

4 Push the handle to secure the hard drive tray.

Make sure the hard drive tray is completely inserted. Otherwise, the hard disk might not function

properly.

5 Repeat the steps above to install all prepared hard disks.

6 Hard disk positions are numbered as shown below.

Note:

Install SSD

If you want to set up a RAID configuration, we recommended all installed hard disks be the same size in

order to optimize hard disk capacity usage.

1 Pull the small lever located beside the LCM display in the direction indicated below to access the SSD bay.

9 Chapter 2: Hardware Setup

2 Place your SSD in the SSD tray. Insert and tighten four screws into the four spots indicated below to secure

the SSD.

3 After securing the SSD and tray, insert both into the empty SSD bay.

Important:

4 Repeat the above steps to install a second SSD.

Make sure the SSD tray is completely inserted. Otherwise, your SSD might not function properly.

5 Close and secure the LCM display.

Note: In order to mount SSD cache, you must install two SSD of the same model and size. Please

visit www.synology.com for a complete compatibility list.

Add a RAM Module to RackStation

Synology offers RAM modules (4GB/8GB) which allow you to expand the memory capacity of your RackStation.

To install, check, or remove your RAM module, please follow the steps below.

Install a RAM Module

1 Shut down your RackStation, and disconnect all connected cables to prevent any possible damage.

2 Remove the two screws located on the back of your RackStation. Then pull the top cover in the direction

indicated below and lift.

Important: Removing the cover will expose sensitive internal components to possible harm. Please avoid touching

any other components when adding or removing memory.

10 Chapter 2: Hardware Setup

3 To access the memory slot, follow the steps below:

a Remove the screws from the support bracket as illustrated below.

b Remove the support bracket.

c Lift the air duct upwards.

4 To insert the new memory module, follow the steps below:

a Release the ejectors on the memory slot by pushing them outwards.

b Align the notch on the gold edge of the module with the notch in the memory slot.

c Use two fingers to apply firm, even pressure and push the memory module downward.

d When the memory is inserted correctly, the ejectors will snap into place.

Important:

5 Replace the top cover, slide it into place, and tighten the two screws on the back of your RackStation.

To avoid damaging the memory module, please hold it by the edges and do not touch the gold

connectors.

Make Sure RackStation Recognizes New Memory Capacity

After installing a new memory module in your RackStation, we recommended checking whether the system

recognizes the new memory.

To check the memory of your RackStation:

1 Start up your RackStation. (See “Start Up Your RackStation” on Page 15 for more information.)

2 Install DSM. (See “Chapter 3: ” on PageInstall DSM on RackStation 17 for more information.)

3 Log in to Synology DiskStation Manager (DSM).

Tabla de contenidos

Otros manuales de Almacenamiento de Synology

Synology

Synology RackStation RC18015xs+ Manual de usuario

Synology

Synology NAS DS220+ Manual

Synology

Synology DiskStation DS214+ Manual de usuario

Synology

Synology DiskStation DS416play Manual de usuario

Synology

Synology DS414slim Manual de usuario

Synology

Synology diskstation DS416J Manual de usuario

Synology

Synology DS224+ Manual de usuario

Synology

Synology DiskStation DS411slim Manual de usuario

Synology

Synology FlashStation FS3017 Manual

Synology

Synology DiskStation DS423 Manual de usuario

Synology

Synology DiskStation DS119j Manual

Synology

Synology DiskStation DS1517+ Manual

Synology

Synology DiskStation DS2419+ Manual

Synology

Synology DiskStation DS716+II Manual de usuario

Synology

Synology VS80 Manual de usuario

Synology

Synology RackStation RS3412xs Manual de usuario

Synology

Synology DS423+ Manual de usuario

Synology

Synology DX513 Manual de usuario

Synology

Synology USB Station Manual de usuario

Synology

Synology CS407 Manual de usuario

Synology

Synology DiskStation DS410j Manual de usuario

Synology

Synology DiskStation DS2411+ Manual de usuario

Synology

Synology SA3410 Manual de usuario

Synology

Synology DS223 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario