Synergy Global Technology ID-55AW Manual de usuario

Toll Free: 1-888-865-6888

Tel: 510-226-8368 Fax: 510-226-8968

Email: [email protected]

User Manual - 55” Widescreen

Options :

- Touchscreen

Aluminum front bezel

ID-55AW

Legal Information

First English printing, October 2002

Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness

of the contents. The information in this document is subject to change without notice. We are not liable for any injury or

loss that results from the use of this equipment.

Safety Instructions

Please read all of these instructions carefully before you use the device. Save this manual for

future reference.

■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.

■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with

temperatures not exceeding 40º Celsius (104º Fahrenheit).

■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing dam

age to other equipment or injury to persons nearby.

■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the

power supply. Proper air convection is necessary to keep it from overheating.

■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.

■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current

labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed

on the equipment’s ratings label.

■Observe all precautions and warnings attached to the equipment.

■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being dam

aged by transient over-voltage.

■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power

supply or on other hardware may cause damage, ﬁre or electrical shock.

■Only qualiﬁed service personnel should open the chassis. Opening it yourself could damage the equipment and invali

date its warranty.

■If any part of the equipment becomes damaged or stops functioning, have it checked by qualiﬁed service personnel.

What the warranty does not cover

■Any product, on which the serial number has been defaced, modiﬁed or removed.

■Damage, deterioration or malfunction resulting from:

□Accident, misuse, neglect, ﬁre, water, lightning, or other acts of nature, unauthorized product modiﬁcation, or

failure to follow instructions supplied with the product.

□Repair or attempted repair by anyone not authorized by us.

□Any damage of the product due to shipment.

□Removal or installation of the product.

□Causes external to the product, such as electric power ﬂuctuation or failure.

□Use of supplies or parts not meeting our speciﬁcations.

□Normal wear and tear.

□Any other causes which does not relate to a product defect.

■Removal, installation, and set-up service charges.

Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation.

Any changes or modiﬁcations made to this equipment may void the user’s authority to operate this equipment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

■Re-position or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

< Part 1 > ID-55AW

1.1 Package Contents

1.2 Structure Diagram & Dimension

1.3 Wall Mount Kit Installation

1.4 Connection

1.5 On-screen Display Operation ( OSD )

1.6 LCD Speciﬁcation

1.7 Remote Controller Usage

1.8 Options : Touchscreen

Contents

P. 1

P.1 - 2

P.3 - 4

P. 4

P.5 - 6

P. 7

P.8 - 9

P.10

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.

■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive

dust, dirt, heat, water, moisture and vibration.

The equipment comes with the standard parts shown in package content. Check and make sure they are

included and in good condition. If anything is missing, or damaged, contact the supplier immediately.

Unpacking

Before Installation

How To Clean Your LCD Monitor

Caution :

■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or

plugging your monitor into an electrical outlet.

■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can

scratch or damage your display. Pressure damage is not covered under warranty.

■Use only cleansers made speciﬁcally for cleaning monitors and monitor screens. Cleansers not made to

clean monitors and monitor screens can scratch the LCD display or strip off the ﬁnish.

■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly

onto the screen or case can cause damage which is not covered under warranty.

■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based

paper product such as paper towels can scratch your LCD screen.

Cleaning Your Monitor

To clean your LCD safely, please follow these steps :

Disconnect the power cord.

Gently wipe the surface using a clean, dry microﬁber cloth. Use as little pressure as possible.

Cleaning Tough Marks and Smudges

To remove tough marks and smudges, please follow these steps :

Disconnect the power cord.

Spray a small amount of non-abrasive cleanser on a microﬁber cloth.

Gently wipe the surface. Use as little pressure as possible.

Wait until your monitor is completely dry before plugging it in and powering it up.

Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your

microﬁber cloth ﬁrst, not directly on the parts you are cleaning.

- ID-55AW unit X 1

- 6ft VGA cable X 1

- 6ft DVI-D cable X 1

- 6ft HDMI cable X 1

- 6ft RCA cable X 1

- 6ft S-Video cable X 1

- 6ft Power cord X 1

- Remote controller X 1

- Wall mount kit x 2

- M5 screw x 8

< 1.1 > Package Content

P. 1

< Part 1 >

Front view

Rear view

Rear case

LCD panel

6mm aluminum front bazel

Audio speaker, pair

LCD membrane

Wall-mount bracket

< 1.2 > Structure Diagram & Dimension

P. 2

Front View Side View

Rear View

Bottom View

Model Product Dimension

(W x D x H)

ID-55AW 1315.6 x 73.8 x 786.4 mm

51.8 x 2.9 x 31"

< 1.2 > Structure Diagram & Dimension

UNIT : mm

1mm = 0.03937 inch

Net

Weight

55 kg

121 lb

Step

P. 3

Make sure to follow the four steps below for wall mount kit installation

< 1.3 > Installation - How to install Wall Mount Kits

■Install left & right front wall mount brackets at

the rear side of the LCD shown above.

■M5 screw x 8 pcs included ( Left & right side ).

Front wall mount bracket

Step

■Install left & right rear wall mount brackets on

the wall shown above.

■6 x M10 screws required ( Left & right side ).

M10 screw sets are not provided.

M5 screw

Rear side

Rear wall mount bracket

Wall M10 screw

Step

■Pick up the LCD installed with front wall mount

brackets.

■Attach the LCD to the rear wall mount brackets

on the wall.

No screws are required.

Wall

Wall WallLCD

P. 4

< 1.4 > Connection

Caution : The LCD display is hot-pluggable, but components of connected devices may not be

hot-pluggable. Plugging and unplugging cables while connected devices are powered on may

cause irreversible damage to the devices and LCD display. Before attempting to connect anything

to the LCD display, we suggest turning off the power to all devices. Apply power to connected

devices again only after the LCD display is receiving power. The company is not responsible for

damage caused in this way.

Power

Audio outS-VideoHDMI Audio in VGADVI-D

R C A

■Package excludes audio cables

< 1.3 > Mounting Kit

Installation Completed.

Step 4

Exit the OSD screen

Toggle analog, digital & video connection (DVI-D and video options only)

Scrolls through menu options and adjusts the displayed control

(To auto adjustment by pressing the button for 5 seconds)

Display the OSD menu

Power on / off LCD

Power light

Green = On

Orange = Power saving

Membrane Switch Function

P. 5

< 1.5 > On-screen Display Operation ( OSD )

Picture

Picture mode : Normal / Soft / Vivid / User mode to choose

Brightness : Adjust background black level of the screen image

Contrast : Adjust the difference between the image background

(black level) and the foreground (white level)

Hue: Adjust the screen hue value

Saturation : Adjust the saturation of the image color

Picture size : Adjust the image size

Color temp : Normal / Cool / Warm / User to choose

Noise reduce : Reduce the noise of the image

Sharpness : Adjust the image from weak to sharp

Auto adjust : Automatically adjust sizes, centers and ﬁne tunes the

video signal to eliminate waviness and distortion.

Clock : Adjust the clock value

Phase : Adjust the phase value

H. Position : Align the screen image left or right

V. Position : Align the screen image up or down

Tabla de contenidos

Otros manuales de Monitor de Synergy Global Technology

Synergy Global Technology

Synergy Global Technology ID-E30Aw Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-HE21AwN Manual de usuario

Synergy Global Technology

Synergy Global Technology LCDR6U15-01 Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-E24Aw Manual de usuario

Synergy Global Technology

Synergy Global Technology LCDR7U17-02 Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-55Pw-LED Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-06A Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-20A Manual de usuario

Synergy Global Technology

Synergy Global Technology LCDR8U19-09 Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-K32Aw Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-HE21Aw Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-08A Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-19D Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-26Aw-LED Manual de usuario

Synergy Global Technology

Synergy Global Technology LCDR7U19-02 Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-40Pw Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-10A Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-E17Aw Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-19W Manual de usuario

Synergy Global Technology

Synergy Global Technology LCD1U19-016 Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-47Aw-LED Manual de usuario

Synergy Global Technology

Synergy Global Technology LCDR7U15-01 Manual de usuario

Synergy Global Technology

Synergy Global Technology LCDR9U20-02 Manual de usuario

Synergy Global Technology

Synergy Global Technology ID-H17A Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación