Synaps 11010230Y3 Manual de instrucciones
24 in. widescreen LCD Monitor
Item Number: 11010230Y3
Installation & User’s Manual
All brand names and trademarks are the property of their respective owners
* Important Notice: Please read this manual carefully
2
Contents
Precautions ........................................................................................................................................3
Package Contents..............................................................................................................................4
Hardware Setup .................................................................................................................................4
Hardware Installation ........................................................................................................................5
Menu Control Buttons.......................................................................................................................6
On Screen Display (OSD) Menu Mode.............................................................................................7
Troubleshooting your DVI monitor connection..............................................................................8
Display Modes....................................................................................................................................9
Specifications ..................................................................................................................................10
Troubleshooting...............................................................................................................................11
Maintenance.....................................................................................................................................12
FCC Radiation Norm........................................................................................................................13
Service Procedure...........................................................................................................................14
Warranty ...........................................................................................................................................15
3
Precautions
1. Read all of these instructions and save this manual for later use.
2. Follow all warnings and instructions on the product.
3. Do not cover or block the ventilation holes in the case.
4. Do not insert sharp objects or spill liquid into the LCD monitor through the cabinet slots; this
may cause accidental fire, electric shock or failure.
5. Unplug the unit when not in use for an extended period of time.
6. Do not attempt to service this product yourself, as opening or removing the cover may expose
you to potential electric shock. Only a qualified technician should service this product.
7. Do not touch the screen directly with your fingers as it may damage the screen; the oil from
your skin is difficult to remove.
8. Do not apply pressure to the screen, the LCD is very delicate.
9. Keep the monitor away from extreme heat, cold or humid places.
10.Do not place directly under sunlight, dusty surroundings or near equipment which may
generate strong magnetic fields.
4
Package Contents
24” TFT LCD Monitor
External Univ15 pin D-sub
(RGB Analog)
input signal cable
Audio connector cable
User’s Manual
Power cord & External
Universal AC Adaptor
(100-240V, 50/60Hz)
Hardware Setup
Handle the LCD monitor with care. Turn off the monitor’s and computer’s power before beginning setup.
Follow the installation instructions step by step.
Input
cdef
NO. Terminal Function
cDVI connector To PC DVI connector
dVGA connector To PC VGA connector
eAudio Audio input
fDC-In DC power input 100~240V,
50/60HZ
5
Hardware Installation
Please note for Windows®User’s
Before attaching your new LCD monitor to your computer, please make sure that your resolution and
refresh rates are set correctly for your monitor to work properly. This is especially important if you are
changing monitors (for example, from a CRT to a LCD). Before disconnecting your old monitor, please
set the resolution to 1024 x 768 and set the refresh rate to 60Hz. The maximum screen resolution is:
1920 x 1080 @ 60Hz.
You can adjust these settings by right clicking your desktop, select “Properties”, then “Settings”.
To adjust the refresh rate, click on “Advanced” and search for this option.
NOTE: Video card settings will be different based on the video capability of your computer. Please
consult your video graphics card or computer manual for more information.
1. Carefully position your LCD monitor so that you can see all of the connection ports on the bottom
of the monitor.
2. A.) Plug one end of the 15-pin D-Sub signal cable into the VGA connector don the monitor and
plug the other end of the cable into the 15-pin D-Sub connector at the rear of your PC.
B.) OR if you are using a DVI signal cable (not included) plug one end into the DVI connector con
the monitor and plug the other end of the cable into the 24-pin DVI connector at the rear of your PC.
Make sure that all of the screws are hand-tightened securely.
2. Plug the Audio connector to the Audio In port eon the monitor, and to the computer line out at the
rear of your PC. This is optional if you wish to use a different audio source.
3. Plug the power connector into the DC In port fport at the rear of the monitor.
4. Connect the power cord to the power source.
5. Power on the computer and the monitor.
6
Menu Control Buttons
cdefghi
No. Button Function
1
AUTO
1. Automatically Adjusts the screen, when not in the OSD
menu. NOTE: This feature will not work when in DVI mode.
2. To exit a submenu.
2 MENU 1.Show the main OSD menu.
2. Enters the selected function.
3 - 1. Decreases an option value.
2. When not in the OSD Menu, decreases the Volume control.
4 +
1. Increases an option value.
2. When not in the OSD Menu, mutes the Volume control.
NOTE: To restore the Volume control when muted, press the
"+" button again.
5 DOWN 1. To navigate down / left through the menu option selection.
2. When not in the OSD Menu, changes the signal source
to/from VGA - DVI.
6 UP 1. To navigate up / right through the menu option selection.
2. When not in the OSD Menu, toggles the aspect ratio from
16:9 / 4:3.
7 POWER Turns the power on / off.
•Press the AUTO button to automatically adjust to the default factory settings.
(Note: This feature will not work when in DVI mode.)
•Press the MENU button to display the OSD menu.
•Press the DOWN or UP buttons to navigate through the submenus.
•Select the desired option menu by pressing the MENU button.
•Push the
-or +button to decrease or increase the value of the current OSD selection.
•The OSD menu will close automatically after 15 seconds of inactivity.
7
OSD (On-Screen Display) Menu Mode
1. Press the MENU button to access the OSD menu.
2. Press the DOWN or UP buttons to navigate through the submenus.
3. Select the desired option, by pressing the MENU button.
4. Use the
-or +button to decrease or increase the value of the selected option.
CONTRAST Adjusts the contrast of the display
DISPLAY ADJUST Adjusts the Horizontal and Vertical Position, Clock, Phase and Quality
settings. (Note: This function is not available in DVI Mode.)
LANGUAGE Selects the 7 different display languages of the OSD Menu.
OSD DISPLAY Adjusts the horizontal and vertical position of the menu.
V
GA / D
V
I Selects the Video source as either VGA or DVI.
AUDIO Increases or decreases the sound
RECALL Recalls the default setting.
16:9 / 4:3 Allows you to toggle the aspect ratio of the screen from 16:9 to 4:3.
EXIT Saves the selected settings and exit the menu.
BRIGHTNESS Adjusts the brightness of the display.
AUTO SETUP Automatically adjusts to the factory default settings.
(Note:This function is not available in DVI mode.)
COLOR TEMP Adjusts the color temperature. 9300K / 7500K / 6500K / USER
Submenus
Current mode Frequency
Current mode Screen Resolution
8
Troubleshooting your DVI monitor connection
Caution! Turn off your computer before connecting this monitor.
If your monitor is connected to your computer with the DVI cable, but no image appears on the screen:
•The cable plugs may be damaged or connected incorrectly. Check both ends of the power cable
and DVI cable, and make sure that there are not bent pins and that the cables are securely
connected to the monitor, power outlet, and computer.
•If the monitor’s power LED is not blue, the monitor is not turned on. To turn the monitor on, press
the monitor power button.
•If there is still no signal, an invalid video input may have been selected. To select DVI Input mode,
press the DOWN button located on the front of the monitor and select DIGITAL INPUT.
•The video card in your computer may have two types of connectors: VGA and DVI (Digital Visual
Interface). Many cards have both types of connectors. Plug the monitor cable into the appropriate
port and tighten the thumbscrews to secure it. Some cards simply give you a choice of connectors,
while others can run both DVI and VGA monitor at the same time. Read the video card’s
documentation to find out your model’s capabilities. This monitor has both DVI and VGA inputs,
use the DVI port (and a DVI cable) –it will provide more accurate color and a sharper image. You
may have to switch your video card from VGA to DVI.
•If you do not receive a DVI signal, try disconnecting the VGA cable as your video card may not
allow both cable types to be connected simultaneously.
DOWN
Important!
If you unplug the monitor while using DVI input, you may need to repeat these troubleshooting steps.
9
Display Modes
Display Mode
Resolution Vertical Frequency (Hz) Horizontal Frequency (KHz)
640x480 59.94 31.47
640x480 72.81 37.86
640x480 75.00 37.50
720x400 70.09 31.47
800x600 60.32 37.88
800x600 72.19 48.08
800x600 75.00 46.80
1024x768 60.00 48.36
1024x768 70.07 56.48
1024x768 71.92 58.04
1024x768 75.03 60.02
1280x960 60.00 60.00
1280x1024 60.00 63.98
1280x1024 75.03 79.98
1680x1050 60.00 65.30
1920x1080 60.00 74.00
1. We offer you 16 available modes compatible with Windows®.
2. Interference on your screen while you are modulating your PC or OSD is normal.
3. For best quality resolution, remember to upgrade your video card driver and choose a mode
listed in the table.
4. Other modes not listed on the table may not be supported.
To adjust the Display Properties:
1. Set the resolution: Right click on the Windows® desktop, choose “Properties”, choose
“Settings”,and set the resolution.
2. Set the refresh rate: See your graphic card’s user guide for instructions.
If the warning appears on the screen;
1. Check the signal cable connection between the computer and LCD monitor.
2. Check the cable connectors. If it is bent or damaged, the signal cable may be affected.
3. If the monitor is in “sleep” mode to save power, please move the mouse or press any key on your
keyboard to “wake” the monitor and return to working mode.
4. Please check input diagrams, and make sure the monitor has been properly connected.
If the warning appears on the screen;
This warning indicates that the input signal frequency does not match those supported by this monitor.
For this model, horizontal frequency must be in the range of 31.5~90 KHz and vertical frequency in the
range of 60~75Hz. Please make sure your input signal is within these ranges.
10
Specifications
LCD Panel
Type
Viewing Angle
Contrast Ratio
Brightness
Response Time
Display Colors
Max Resolution
Pixel Pitch
Aspect Ratio
24” TFT Active Matrix LCD Display
H:170° , V:160°
1000 : 1 (Typical)
300 cd/m2(Typical)
5 ms
16.7M colors
1920X 1080 (WUXGA)
0.277mm(H)x0.277mm(V)
16 : 9
Input Signals
RGB Analog
Video Level:0.7Vp-p(75Ω)
Sync TTL with 75Ωinternal pull-up resistors
Frequency FH: 31.5~90 KHz;
FV: 60~75Hz
Compatibility PC / MAC Up to 1920X1080@60Hz(Non-interlaced)
Connector
RGB Analog
Audio
Power
Digital DVI
D-sub 15-pin
Stereo Phone Jack,
External Universal AC Adaptor
DVI 24-pin
Power
Voltage
Consumption
Power saving mode
100-240V, 50/60Hz(universal) via external
power supply
Active < 60Watt Max
Standby <2Watt
Internal Speaker x2 (Stereo)
User Interface LED Indicator
Active - Green
Off - Turn off
Standby - Red
Dimensions Physical 510mm (H) x 615mm (W) x 203mm (D)
Net Weight 11.66lbs
Power Management VESA DPMS
Regulation (Certifications) FCC
LCD Pixel Criteria
Normally, a 24 WUXGA (1920 x 1080) display has nearly 6.3 million sub-pixels. There may be up to 8
non-performing pixels on the LCD screen, which is only 0.000002% of the total sub-pixels. This
percentage is acceptable for any inspection specifications.
Tabla de contenidos
Otros manuales de Monitor de Synaps
