SWorkz S14-2 Manual de usuario
2
INSTRUCTION
Based on the success of the S104 EVO, SWORKz further developed and improved their 1/10 off road
buggy and came up with the S14-2.
The S14-2 is the top SWORKz 1/10th electric buggy at this moment. It is based on the S104 EVO unique
front pivot ball design with new front and rear suspension. Now equipped with a 12mm hex wheel
adapter.
The S14-2 newly designed rear arms are made from a stronger standard nylon material. Optional carbon
covers are available to adjust the arm's stiffness.
The T-7075 aluminum chassis with its new center twist system gives more rear grip. Matched with a new
rear upper carbon deck giving the buggy more traction. .
The S14-2 includes high quality parts, a rened shock system and many option parts.
Many SWORKz Factory Team Option Parts are included in this pro kit.
SWORKz utilizes only the highest quality materials and industry leading manufacturing processes
resulting in a faster, stronger, and more reliable vehicle. The S14-2 Pro Kit is designed to win races.
Congratulations on your purchase of the new SWORKz S104 EVO 1/10 scale off-road racing buggy pro
kit.
Please read this manual thoroughly before you attempt to drive your S104 EVO. This manual contains
step-by-step instructions to help you complete, prepare for startup, and ne-tune your Buggy. Updates,
setups, and product news will be posted on our website (www.sworkz.com), so check often.
As always, if you should have any questions or need help with your S104 EVO, please feel free to contact
our ofcial SWORKz dealers and distributors, as they will be glad to help you. You may also contact us at
any time for the most up to date information and support.
1. Standard SWORKz X-System transmission gear system.
2. New Big Bore Shocks.
3. New Stronger Carbon Fiber shock towers with New Geometry Shock Positions.
4. SWORKz T-7075 aluminum chassis with its new center twist system design.
5. New Stronger Material arms.
6. New Centre Gear Diff System.
7. Aluminum Easy Fit Motor Holder with Center Diff. Mount.
8. 12mm Hex Wheel Hub system
9. Pivot Ball Steering System
10. New Adjustable Steering Plate with New Bell Crank System.
11. Full aluminum arm holders and toe in plates.
12. Fully adjustable rear toe in plate system.
S14-2 Pro Kit Features :
Specification
Length: 385mm
Width: 248mm
Height: 158mm
Ground Clearance: 48mm
Wheelbase: 275-278mm
Track: F:223mm / R:228mm
Gear Ratio:
C:87T/20T, F/R 42/17T
Weight: 1720g~1820g
3
WARRANTY
Your SWORKz S14-2 kit warranty covers workmanship and manufacturing defects
of the original and unmodified parts. Warranty claims resulting from crashes,
abuse, improper operation, improper mounting, improper adjustment or lack of
maintenance will not be honored.
Contact your local hobby shop or SWORKz distributor for all claims and
questions. Claims must be well documented. All Claims are subject to expert
examination approval by SWORKz
4
Instruction 2
Warranty 3
Index 4
Required equipment for operation 5
Operation guide 6
Assembly steps 7-32
Blank set-up sheet 33-34
Set-up sheet 35
S14-2 key no. list 36-37
S14-2 spare part list 38-39
S14-2 option parts list 39
INDEX
This radio control racing car is not a toy!
This high-performance R/C model is recommended for ages
14 and older.
5
Charger and LiPo Battery
Double-sided tape
Paint
Long nose pliers
Modeling knife
Instant cement Thread lock
Included items
Hex wrench
1.5mm
2mm
2.5mm
1.5mm
2mm
2.5mm
Glow plug wrench
Screwdriver
Screwdriver
Radio Gear
Stick Type
ESC system
Wheel & Trigger Type
Receiver
Steering servo
Tools Recommended
Breshless Motor
Side cutter
Curved scissors
Grease
Required Equipment for Operation
6
Operation Guide
Safety Precautions
The SWORKz S14-2 is a high performance radio control model which needs to be operated with
caution and common sense.
The S14-2 Pro Kit is not intended for children under the age of 14 without adult supervision.
SWORKz shall not be held liable for any loss or damages, whether direct, indirect, act of nature,
arising from abuse or misuse of this product or any other product required.
- The LiPO Battery can be dangerous if improperly handled.
- Always keep your LiPO Battery in a cool area and never use it near flames, sparks, or while
smoking.
- Keep your LiPO Battery, and all other ammables, out of the reach of children.
- After running your car, all parts of the Motor and ESC can become extremely hot. Be careful not
to touch these parts.
- This model is controlled by your radio controller and can be vulnerable to interference from
many outside sources. This interference can cause a loss of control so it is necessary to operate this
model in an open area to avoid personal or property damage. Always ensure turning on your radio
rst.
- Keep all the products included in the package out of the reach of children.
- This model contains many fast rotating parts. Never touch them during operation.
- Follow the instructions included with your radio gear.
- Never operate your model near people or property. The speed of this model has the potential to
injure people and or damage property if misused.
- Always use original SWORKz spare parts and option parts.
- Always ensure that the buggy is in proper working condition before use.
- Always exercise caution when using any tools.
overturn
Assemble for
4 sets
Assemble for
2 sets
Assemble both left
and right sides
Assemble in the
specied order
Assemble front
and rear
Thread Locking
Compound
Grease Pure Silicone Oil
7
BAG B1
2
330282
330282
116013
330277
400002
330283
101025
101025
330279
330278
330279
610012
101025
101025
330278
330278
210036
116013
330283
330284 330277
400002
108017
Fill the differentials
with oil up to 80%
full.
Use SWORKz diff.
Oil 5000cps for the
front Diff.
and 5000cps for
the rear Diff.
Apply a light coat of grease to
the o-ring, then slide it over the
outdrive shaft and place it in
the diff case.
Insert the pin through the hole
of the out drive.
330283
Pin M2x10mmx4
400002
O-ring S5 4.8x1.5 x4
116013
Ball Bearing 10x15x4mm x4
108017
M2.6x10mm FH/ST HEX Screw x8
330279
Bevel Gear Shaft x4
101025
Shim 3.5x10x0.1mm x8
8
4
3
BAG D
Use 10x12x0.1mm or 10x12x0.2mm
shims to adjust when there is too
much play between the crown gear
and pinion gear.
101023
101024
116013
400008
116013
330295
330283
330286
2501096A
116013
Ball Bearing 10x15x4mm x4
330283
Pin M2x10mm x2
330295
CVD Join x2
400008
O-ring for Pinion Gear x2
330617
S104 EVO Front Center Drive Shaft 80mm x1
330616
S104 EVO Rear Center Drive Shaft 113mm x1
330617
330616
108001
M3x12mm FH/ST HEX Screw x8
101023
10x12x0.1mm S104 Shim x6
101024
10x12x0.2mm S104 Shim x2
330595
330598
2501096A
2501096A
108001
108001
108001
108001
9
5
6
BAG E
2501794C
2501794C
2501794C
330315
330606
108018
108018
330315
Sway Bar Ball Stud x2
108018
M3x30mm FH/ST HEX Screw x2
330292
Front/Rear Lower Arm Hing Pin x2
2501808
2501808
330292
330292
2501808
2501808
10
7
8
BAG E
104004
104004
2501096A
115055
104004
M3x3mm Set Screw x2
104005
M3x4mm Set Screw x2
105004
M2.6x6mm Cap Screw x2
105004
104005
104005
115055
Front Sway Bar 1.3mm x1
Tabla de contenidos
