SWEEX PP100 Manual de usuario
English version
4
PP100 Sweex Manageable UPS 1000 VA
Introduction:
First of all, many thanks for purchasing this Sweex Manageable UPS 1000 VA.
The Sweex Manageable UPS 1000 VA protects your computers against power failures and harmful surges in the power supply.
To ensure this product operates correctly, we advise you to carefully read this manual first. If despite this manual you still experience problems during
installation or operation of this product, go to www.sweex.com and look under the heading service & support.
In order to fully enjoy the Sweex Manageable UPS 1000 VA, it is important to observe the following
• Do not expose the Sweex Manageable UPS 1000 VA to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity
of heating elements.
• Do not use the Sweex Manageable UPS 1000 VA in extremely dusty or moist surroundings.
• Protect the device against powerful shocks or jolts – they may damage the internal electronics.
• Never attempt to open the device yourself – it will cause the warranty to lapse.
Contents of the box
Prior to using the Sweex Manageable UPS 1000 VA, check if all required parts are present. The following parts must be present in the box:
• Manageable UPS 1000 VA
• 2 x Feeder supply cable for external equipment
• 2 x spare fuses
• CD-ROM with software and manual
If one of the above parts is missing, please contact the retail outlet where you purchased the device.
English version
5
Specifications
• Capacity: 1000 VA, 600W
• 4 x power outlets
• Input voltage: 160V – 280V, Input frequency: 50Hz ± 5%
• Output voltage: 220V ± 5%, Output frequency: 50Hz ± 1%
• Battery capacity: 2x 7AH
• USB connection to computer
• RJ11 connection for telephone/fax
• Software suitable for Windows 98SE, 2000 and XP
Additional specifications
• Battery back-up time*: 25-30 minutes for a single PC (500W power supply) and a single 17” TFT VDU.
• Switching time 6 ms
• Noise: < 45 db
• Dimensions: 225 x 124 x 380 (h x w x d)
• Weight: 10 kg
*The time span during which the Sweex Manageable UPS 1000 VA can supply power to equipment connected to it once power fails, always
depends on the total load on the UPS.
Hardware Installation
1. Ensure that the computer you want to connect to the UPS is switched off.
2. Connect the power supply cable of the computer to the power outlet of the Sweex Manageable UPS 1000 VA.
3. Connect the UPS to the mains network.
4. Switch on the UPS by pressing the button at the front of the device.
5. Switch on the computer again.
Note:
• Do not connect the USB cable before the software has been installed.
• The Sweex Manageable UPS 1000 VA has been designed to protect computer systems. Connecting other electrical devices is not recommended
and entirely at one’s own risk.
• The UPS needs to be charged for a period of ± 8 hours in order to reach its full back-up capacity.
English version
6
Software Installation
Insert the Sweex CD-ROM in the CD-ROM player. A menu appears automatically. Click the button to install the drivers.
The installation procedure is started.
In the first window, click “Next”.
Enter your details:
Enter your name or computer name. Under “Company Name”, enter a random name. Do not leave it blank. Under “Serial Number” enter the code
starting with “PL-...” which you can find on the protective cover of the Sweex CD-ROM. Please use capitals.
Click on “Next” and follow the subsequent steps to complete the installation.
Connect the USB cable between the computer and the Sweex Manageable UPS 1000 VA.
Windows will install the UPS automatically. Click “OK” to confirm a restart of the computer.
Front view
The front of the Sweex Manageable UPS 1000 VA features 3 LEDs and a button.
• The blue LED indicates that the mains power supply is ok.
• The orange LED indicates that the UPS is charging.
• The red LED is lit in the event of a power failure. The UPS now supplies power to all devices connected to it.
• The button underneath the LEDs is the power switch.
English version
7
Charging the Sweex Manageable UPS 1000 VA
The UPS starts charging once connected to the mains network. The orange LED will be lit. The UPS will also charge when switched on via the power
switch.
Setting the Sweex Manageable UPS 1000 VA
The UPS settings can be adjusted via PowerManagerLite. The icon to start PowerManagerLite is located in the bottom right of your screen.
Double-click this icon with your left mouse button or click it once with your right mouse button and select “Start Monitor (W)...”.
The PowerManagerLite ma in screen appears.
Click on the various icons to change the settings.
Additional tips and further explanation to the remaining functions of PowerManagerLite can be found in the English manual on the CD-ROM.
Warranty
All products under the Sweex brand are warranted for a period of three years. We do not grant support or warranties for any software and/or
(rechargeable) batteries included. Settlement of guarantee only takes place via the dealer where you have purchased the product in question.
The rightful owner has and retains title to all brand names and related rights mentioned in this manual.
Tabla de contenidos
Otros manuales de Unión Postal Universal de SWEEX
SWEEX
SWEEX Line Interactive 500 Manual de usuario
SWEEX
SWEEX PP220 Manual de usuario
SWEEX
SWEEX PP061 - QUICK_START_GUIDE Manual de usuario
SWEEX
SWEEX PP200 Manual de usuario
SWEEX
SWEEX PP161 - QUICK_START_GUIDE Manual de usuario
SWEEX
SWEEX PP210 Manual de usuario
SWEEX
SWEEX PP300 Manual de usuario
SWEEX
SWEEX PP121 - QUICK_START_GUIDE Manual de usuario
SWEEX
SWEEX BC200010 Manual de usuario
Manuales populares de Unión Postal Universal de otras marcas
Pylontech
Pylontech Victron & Pylontech US5000 Manual de usuario
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Manual de usuario
Mecer
Mecer ME-1000-WTU Manual de usuario
Mustek
Mustek PowerMust 530(B) Plus Manual de instalación y operación
Emerson
Emerson Liebert NXL series Manual de usuario
MAKELSAN
MAKELSAN BOXER SERIES Manual de usuario
